Houston Area TBI ?????????
#1
Supreme Member
Thread Starter
Join Date: Dec 2005
Location: Texas City, Texas Area
Posts: 1,244
Likes: 0
Received 1 Like
on
1 Post
Car: 89 RS, 92 Z28
Engine: 305 TBI, 350 TPI
Transmission: 700R4 Both Cars
Axle/Gears: 3.23 Posi.. 4 wheel disc both cars
Houston Area TBI ?????????
Does anyone in the Houston area tune TBI chips????? I mean is there a place that will data log, and then burn chips for TBI cars?????
What about a Dyno in the area...???? Ive made alot of calls around for the tuning, and no luck...Dont mind if it is a drive, thanks for any help....Tom
What about a Dyno in the area...???? Ive made alot of calls around for the tuning, and no luck...Dont mind if it is a drive, thanks for any help....Tom
#2
Moderator
Join Date: Feb 2000
Location: Schererville , IN
Posts: 7,015
Likes: 0
Received 1 Like
on
1 Post
Car: 91 GTA, 91 Formula, 89 TTA
Engine: all 225+ RWHP
Transmission: all OD
Axle/Gears: Always the good ones
Re: Houston Area TBI ?????????
Get an EBL and dont waste time on the stock TBI stuff once u start modding it.
This is from experience, and I'm just telling u the facts.
Check out the DIY prom form and look up Rbobs EBL there and at dynamicefi.com
For what u pay for the ebl and installation will add up to barely more than the stuff needed to do it yourself.
later
Jeremy
This is from experience, and I'm just telling u the facts.
Check out the DIY prom form and look up Rbobs EBL there and at dynamicefi.com
For what u pay for the ebl and installation will add up to barely more than the stuff needed to do it yourself.
later
Jeremy
Last edited by Zap Racing; 04-26-2007 at 08:54 AM.
#3
Supreme Member
Thread Starter
Join Date: Dec 2005
Location: Texas City, Texas Area
Posts: 1,244
Likes: 0
Received 1 Like
on
1 Post
Car: 89 RS, 92 Z28
Engine: 305 TBI, 350 TPI
Transmission: 700R4 Both Cars
Axle/Gears: 3.23 Posi.. 4 wheel disc both cars
Re: Houston Area TBI ?????????
Get an EBL and dont waste time on the stock TBI stuff once u start modding it.
This is from experience, and I'm just telling u the facts.
Check out the DIY prom form and look up Rbobs EBL there and at dynamicefi.com
For what u pay for the ebl and installation will add up to barely more than the stuff needed to do it yourself.
later
Jeremy
This is from experience, and I'm just telling u the facts.
Check out the DIY prom form and look up Rbobs EBL there and at dynamicefi.com
For what u pay for the ebl and installation will add up to barely more than the stuff needed to do it yourself.
later
Jeremy
#4
Moderator
Join Date: Feb 2000
Location: Schererville , IN
Posts: 7,015
Likes: 0
Received 1 Like
on
1 Post
Car: 91 GTA, 91 Formula, 89 TTA
Engine: all 225+ RWHP
Transmission: all OD
Axle/Gears: Always the good ones
Re: Houston Area TBI ?????????
U will easily waste as much money on the stock flawed code as u will on the EBL.
Its already not stock, so fix all the problems at once.
This isnt being superior, its coming from someone who has been there and done that.
Ultimately it will save u time and trouble and give u a superior setup for better driveability.
later
Jeremy
Its already not stock, so fix all the problems at once.
This isnt being superior, its coming from someone who has been there and done that.
Ultimately it will save u time and trouble and give u a superior setup for better driveability.
later
Jeremy
#5
Moderator
Join Date: Jul 2003
Location: Houston Texas
Posts: 4,079
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 IROC Z-28
Engine: L98 350--modified
Transmission: 700 R4--modified
Axle/Gears: 4:10 Posi
Re: Houston Area TBI ?????????
For the chip, contact Mike--1bad91z-- try sending him a pm thru the board.
For the dyno--ARD is about the only shop in Hou that is "thirdgen friendly", and has a very nice dyno.
Owen
ARD--Advanced Racing Dynamics
5023 Addicks Satsuma rd, Suite b,
Houston, Texas, 77084
832-593-9140
From I-10 and highway 6, go north past Keith Harrow till you reach Addicks Satsuma. Take a right turn and go about 100 yards down, and you will see the sign and it is located on the left in a business park.
For the dyno--ARD is about the only shop in Hou that is "thirdgen friendly", and has a very nice dyno.
Owen
ARD--Advanced Racing Dynamics
5023 Addicks Satsuma rd, Suite b,
Houston, Texas, 77084
832-593-9140
From I-10 and highway 6, go north past Keith Harrow till you reach Addicks Satsuma. Take a right turn and go about 100 yards down, and you will see the sign and it is located on the left in a business park.
Last edited by Zap Racing; 04-27-2007 at 08:35 AM.
#7
Supreme Member
iTrader: (1)
Join Date: Jul 2001
Location: Houston Area
Posts: 4,627
Likes: 0
Received 3 Likes
on
2 Posts
Car: Faster
Engine: Than
Transmission: You!
Re: Houston Area TBI ?????????
Zap, thanks for reference! Anyone here may PM me here on TGO or e-mail at
ms1badz@yahoo.com if anyone has tuning questions.
Mike
ms1badz@yahoo.com if anyone has tuning questions.
Mike
Trending Topics
#8
Supreme Member
Thread Starter
Join Date: Dec 2005
Location: Texas City, Texas Area
Posts: 1,244
Likes: 0
Received 1 Like
on
1 Post
Car: 89 RS, 92 Z28
Engine: 305 TBI, 350 TPI
Transmission: 700R4 Both Cars
Axle/Gears: 3.23 Posi.. 4 wheel disc both cars
Re: Houston Area TBI ?????????
For the chip, contact Mike--1bad91z-- try sending him a pm thru the board.
For the dyno--ARD is about the only shop in Hou that is "thirdgen friendly", and has a very nice dyno.
Owen
ARD--Advanced Racing Dynamics
5023 Addicks Satsuma rd, Suite b,
Houston, Texas, 77084
832-593-9140
From I-10 and highway 6, go north past Keith Harrow till you reach Addicks Satsuma. Take a right turn and go about 100 yards down, and you will see the sign and it is located on the left in a business park.
For the dyno--ARD is about the only shop in Hou that is "thirdgen friendly", and has a very nice dyno.
Owen
ARD--Advanced Racing Dynamics
5023 Addicks Satsuma rd, Suite b,
Houston, Texas, 77084
832-593-9140
From I-10 and highway 6, go north past Keith Harrow till you reach Addicks Satsuma. Take a right turn and go about 100 yards down, and you will see the sign and it is located on the left in a business park.
#9
Supreme Member
iTrader: (2)
Join Date: Dec 2006
Location: Hou. TX
Posts: 5,538
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 TA, 91 B4C
Engine: 5.3, 4.8
Transmission: 4L80 4000, T56
Axle/Gears: 4.30 M12, 23.42 10 bolt
Re: Houston Area TBI ?????????
Junk the TBI for the Hollry TBI, it kiks but and i never herd of anyone having issues, but thats just me...good luck.
Thread
Thread Starter
Forum
Replies
Last Post