700R4 Valve Body Torque
#5
Supreme Member
Join Date: Feb 2001
Location: Webster, N.Y.
Posts: 1,730
Likes: 0
Received 0 Likes
on
0 Posts
Are you sure you don't mean 10 ft/lbs? I have never seen any torque wrench except for a beam type that could go that low. If it was 10 ft/lbs (120 in/lbs) on a 700, I wouldn't worry about it at all. If it IS 10 in/lbs, yea, go back and retighten them... soon!
#6
The GM engineers like 8 foot pounds on the iron valve bodies cept for the 3 bolts around the TV area at the edge.
In the TV area they like 6 foot pounds.
I am only quoting the guys at the Mesa Proving grounds from the late 1980's
In the TV area they like 6 foot pounds.
I am only quoting the guys at the Mesa Proving grounds from the late 1980's
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post