EBL ECM and Accessories
03-24-2014, 08:03 PM
#1
Junior Member
Thread Starter
Join Date: May 2009
Location: Texas
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z28
Engine: 6.0
Transmission: 4L80E
Axle/Gears: 3.42
EBL ECM and Accessories
I have an EBL ECM w/port mod, knock filter, and 4way buffer. I used this setup to tune my 355 TPI which was in my 92 Z28. This is a great setup which is easy to use and makes tuning your own ECM very easy. I have everything needed to install this in any Camaro or Firebird running a TPI system. Dynamic EFI is who I purchased this through and they are a great company with the best customer service! I am asking $300 +shipping.
Last edited by patrick92z28; 04-28-2014 at 02:40 PM.
03-25-2014, 01:26 PM
#3
Junior Member
Thread Starter
Join Date: May 2009
Location: Texas
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z28
Engine: 6.0
Transmission: 4L80E
Axle/Gears: 3.42
03-25-2014, 10:03 PM
#5
Member
Join Date: Jul 2011
Location: Delaware
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Firebird, 91 Trans Am
Engine: L31 with HSR, LB9
Transmission: 700R4, 700R4
Axle/Gears: '99 10 bolt 3.90, '01 10 bolt 3.42
Re: EBL ECM and Accessories
Also interested in the EBL without the laptop.
04-10-2014, 07:17 AM
#7
Junior Member
Thread Starter
Join Date: May 2009
Location: Texas
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z28
Engine: 6.0
Transmission: 4L80E
Axle/Gears: 3.42
Re: EBL ECM and Accessories
I have an EBL ECM w/port mod, knock filter, and 4way buffer. I used this setup to tune my 355 TPI which was in my 92 Z28. This is a great setup which is easy to use and makes tuning your own ECM very easy. I have everything needed to install this in any 90-92 Camaro or Firebird running a TPI system. This will work with any speed density setup that utilizes the 90-92 ecm connectors. Dynamic EFI is who I purchased this through and they are a great company with the best customer service! I am asking $350 shipped.
Attachment 274474
Attachment 274474
Edit, Price change and BUMP!
Trending Topics
04-17-2014, 07:29 AM
#10
TGO Supporter/Moderator
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,720
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
Re: EBL ECM and Accessories
I have an EBL ECM w/port mod, knock filter, and 4way buffer. I used this setup to tune my 355 TPI which was in my 92 Z28. This is a great setup which is easy to use and makes tuning your own ECM very easy. I have everything needed to install this in any 90-92 Camaro or Firebird running a TPI system. This will work with any speed density setup that utilizes the 90-92 ecm connectors. Dynamic EFI is who I purchased this through and they are a great company with the best customer service! I am asking $350 shipped.
Attachment 274474
Attachment 274474
-- Joe
04-27-2014, 11:59 PM
#11
Junior Member
Thread Starter
Join Date: May 2009
Location: Texas
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z28
Engine: 6.0
Transmission: 4L80E
Axle/Gears: 3.42
Re: EBL ECM and Accessories
Dropped a lifter and trashed my cam then i found a good deal on a 6.0 LS and decided to swap it over so no need for the EBL anymore.
04-28-2014, 02:57 PM
#12
Junior Member
Thread Starter
Join Date: May 2009
Location: Texas
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z28
Engine: 6.0
Transmission: 4L80E
Axle/Gears: 3.42
Re: EBL ECM and Accessories
I have an EBL ECM w/port mod, knock filter, and 4way buffer. I used this setup to tune my 355 TPI which was in my 92 Z28. This is a great setup which is easy to use and makes tuning your own ECM very easy. I have everything needed to install this in any Camaro or Firebird running a TPI system. Dynamic EFI is who I purchased this through and they are a great company with the best customer service! I am asking $300 +shipping.
Attachment 274474
Attachment 274474
04-28-2014, 04:21 PM
#13
Member
iTrader: (1)
Join Date: Jul 1999
Location: Chesterland, Oh
Posts: 182
Likes: 0
Received 3 Likes
on
3 Posts
Car: 92 Trans Am
Engine: 350 tpi
Transmission: 5 Speed
Axle/Gears: 3.42
Re: EBL ECM and Accessories
I have a 92 TA with tpi, sd and a 7730. Does this plug right in? What's the knock filter and 4 way buffer used for?
04-28-2014, 04:59 PM
#14
Junior Member
Thread Starter
Join Date: May 2009
Location: Texas
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Z28
Engine: 6.0
Transmission: 4L80E
Axle/Gears: 3.42
Re: EBL ECM and Accessories
There are a couple pins that have to be moved on the connector but it is really easy(if I could do it I'm sure anyone can)and then wire in the buffer and knock filter. The buffer is for the vehicle speed sensor and the knock filter is for your knock sensor as they read at a different pulse rate compared to the 7730.
04-28-2014, 07:04 PM
#15
TGO Supporter/Moderator
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,720
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
Re: EBL ECM and Accessories
There are a couple pins that have to be moved on the connector but it is really easy(if I could do it I'm sure anyone can)and then wire in the buffer and knock filter. The buffer is for the vehicle speed sensor and the knock filter is for your knock sensor as they read at a different pulse rate compared to the 7730.
Not that it would take more than 20 minutes..
-- Joe
Thread
Thread Starter
Forum
Replies
Last Post
efiguy
Engine/Drivetrain/Suspension Parts for Sale
0
09-27-2015 01:30 PM
