86 Camaro Drag Car Project (Lots of Pics)
#51
Junior Member
Thread Starter
Join Date: Feb 2013
Location: Shohola, Pa
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Z28
Engine: 383 sbc
Transmission: th350
Axle/Gears: 4.56
Re: 86 Camaro Drag Car Project (Lots of Pics)
Yeah, those are Iron Eagle 200's. They are just on the mock up motor. The 388 that's going in it has World Products Sportsmans on it.
#52
Junior Member
Thread Starter
Join Date: Feb 2013
Location: Shohola, Pa
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Z28
Engine: 383 sbc
Transmission: th350
Axle/Gears: 4.56
Re: 86 Camaro Drag Car Project (Lots of Pics)
So I haven't posted much about the progress on the car in the past month. That's because there hasn't been much do. My old lady and I decided to call it quits after 8 years. It's been coming for some time and was a mutual decision. That being said, the past month has been focusing on my two small girls and getting my place back in order. So the plans to have the car ready for Super Chevy @ Maple Grove have been called. However today is my son's 16th birthday and over the weekend we took the time to install his engine and trans. We got the engine back about three weeks ago. Just to refresh its a 388 with 10.7 compression, World Products heads, Isky solid roller cam and a Performer RPM intake. Trans is a Th-350 with a ATI converter. We also got the 12 bolt assembled with the spool, 4.56's, C-clip eliminators and new axles. It's a 69 camaro housing and is 3/4 of an inch narrower on each side then a stock third gen. It fits real nice with the 10 inch rims. Hopefully ill be posting some pics of the wiring and interior going together soon. Here's a few shots of the engine and trans going together and in the car.
#53
Member
Join Date: Mar 2013
Location: gladstone
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Car: 72 nova/ 90 camaro rs,04 suburban
Engine: blown 327/ 355/306/355/5.3
Transmission: muncie 4 speed/T5/powerglide,4l80e
Axle/Gears: 342/411/456/ moser axles
Re: 86 Camaro Drag Car Project (Lots of Pics)
This is looking really good!
#54
Junior Member
Join Date: Sep 2014
Location: Redding, CA
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Car: 83' Camaro
Engine: 383 Stroker
Transmission: Powerglide
Axle/Gears: 4.56
Re: 86 Camaro Drag Car Project (Lots of Pics)
Very nice project mine is very similar. Would you mind sharing with me what oil pan you used? I also have the stock K Member and the 383 has 6" H-Beam Rods. I've searched all over the internet and haven't found anything that says" yes this will fit". Any help would be awesome! Do you still have the parts car?
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM
Linson
Auto Detailing and Appearance
40
08-21-2015 02:12 PM