drag race time is upon us! and a new shop is almost done!
#1
drag race time is upon us! and a new shop is almost done!
this spring the car gets a Complete overhaul!
for years i have worked out of a small small one car garage.pushing the car in when putting it away.. and pulling it out when time to work on it. or take it for a sat night spin...
well after getting the 2nd house that has a separate 40x50 work shop. was sweet sweet thing. she gets the 2 car garage under the house.. and i get the work shop for my camaro and tools.. dreams do come true...
and moving from the the first house to this new one was not so bad. as i used the new shop to unload into and then move into the new place.. my old place is now rented out.. and makes a few bucks (DINNER OUT) maby..LOL
but before i want to bring my Camaro to it's new home.. i wanted a nice clean spiffy work shop...!the new place is 12 years old.. and the shop floor is nice.. not one Crack...lol no dings... just a few oil stains...and it has a 12x12 office off to the side...with AC..sweet..the room it now filed with new car upgrade parts....
so 2 years ago i pulled the eng for the 427 sbc upgrade and it snowballed with new seats (recaro)
blower
intercooler
new procomp guages. new wheels tires.. Kmember. A arms Coil overs
and.. well name it...
iv got to bolt the front end on. to get the car to a state that i can move it the 40 miles to the new digs..(rollback)rig...im thinking.
and till them.. the new shop is getting a make over
shot from the back deck of the house.
the new man cave! not as big as i would like.. but its going to be nice inside. ac.gas heat and cable (even a 40" LCD)
this shot shows it right after unlading stuff from the other house. i put up a few banners to keep me motivated
another shot. in this one you can see the back office notice the loft..see anything missing..how about supports!
ill be fixing that also..they have it hung from the truss...lol
back office starting to fill up as i move
for years i have worked out of a small small one car garage.pushing the car in when putting it away.. and pulling it out when time to work on it. or take it for a sat night spin...
well after getting the 2nd house that has a separate 40x50 work shop. was sweet sweet thing. she gets the 2 car garage under the house.. and i get the work shop for my camaro and tools.. dreams do come true...
and moving from the the first house to this new one was not so bad. as i used the new shop to unload into and then move into the new place.. my old place is now rented out.. and makes a few bucks (DINNER OUT) maby..LOL
but before i want to bring my Camaro to it's new home.. i wanted a nice clean spiffy work shop...!the new place is 12 years old.. and the shop floor is nice.. not one Crack...lol no dings... just a few oil stains...and it has a 12x12 office off to the side...with AC..sweet..the room it now filed with new car upgrade parts....
so 2 years ago i pulled the eng for the 427 sbc upgrade and it snowballed with new seats (recaro)
blower
intercooler
new procomp guages. new wheels tires.. Kmember. A arms Coil overs
and.. well name it...
iv got to bolt the front end on. to get the car to a state that i can move it the 40 miles to the new digs..(rollback)rig...im thinking.
and till them.. the new shop is getting a make over
shot from the back deck of the house.
the new man cave! not as big as i would like.. but its going to be nice inside. ac.gas heat and cable (even a 40" LCD)
this shot shows it right after unlading stuff from the other house. i put up a few banners to keep me motivated
another shot. in this one you can see the back office notice the loft..see anything missing..how about supports!
ill be fixing that also..they have it hung from the truss...lol
back office starting to fill up as i move
Last edited by articwhiteZ; 04-15-2014 at 02:45 PM.
#2
Re: drag race time is upon us! and a new shop is almost done!
getting all moved it and the shop getting cleand out. start with adding some dry wall. and primer and paint.. nexed is floor color
and trim..
work in progress
its getter there
painted. and the first trim done on ea side of door
getting there
another shot with shelves removed so wall could be painted
the guys who did the first install.. did some hack work..will have to fix a few things..
but they did put in lots of outlets
soon this week using a floor buffer scubber to clean the floor
and then letting it set a week before color...all this so my camaro has a nice home. and i have a mancave.
and trim..
work in progress
its getter there
painted. and the first trim done on ea side of door
getting there
another shot with shelves removed so wall could be painted
the guys who did the first install.. did some hack work..will have to fix a few things..
but they did put in lots of outlets
soon this week using a floor buffer scubber to clean the floor
and then letting it set a week before color...all this so my camaro has a nice home. and i have a mancave.
Last edited by articwhiteZ; 04-16-2014 at 12:17 AM.
#5
Re: drag race time is upon us! and a new shop is almost done!
that is the plane. a nice satin white finish on 2 coats of white base.and enof light to cover a landing strip. the painting is done. the floor color is also a light color.. sorta a light sand in polyurethane also in a satin finish. to help with spill clean up.and to help with the light. the floor work is this week.. the wall trim is simple..just 1x3 wood finished with a nice forest green color. the work benches will be done in the same finish...
Last edited by articwhiteZ; 04-16-2014 at 12:14 AM.
#6
Member
iTrader: (2)
Join Date: Feb 2010
Posts: 460
Likes: 0
Received 3 Likes
on
3 Posts
Car: '89 Camaro
Engine: LS1
Transmission: 4L65/70E
Axle/Gears: 9 Inch, 3.70 gears
Re: drag race time is upon us! and a new shop is almost done!
I'm highly jealous, all these years of working in a carport or apartment parking lots. New show looks great, even if they aren't ever big enough.
#7
Re: drag race time is upon us! and a new shop is almost done!
Well I say not big enof. It will fit 2 cars just fine. But...I want a 6000lb lift in the 2nd bay..ill have it checked out... but I dont think ill be able to go up over 6 feet.. might have to keep it under 5 feet... end up working on a chair. ..under the car lol
Trending Topics
#8
#10
Member
iTrader: (2)
Join Date: Feb 2010
Posts: 460
Likes: 0
Received 3 Likes
on
3 Posts
Car: '89 Camaro
Engine: LS1
Transmission: 4L65/70E
Axle/Gears: 9 Inch, 3.70 gears
Re: drag race time is upon us! and a new shop is almost done!
Eh, I was thinking more along the lines of a office rolly chair. That way one good push and your are out from under the car and back to the tool box.
#11
Re: drag race time is upon us! and a new shop is almost done!
added to the corner bench.
going to add 1/8 steel plate over the top.
had to add more bench space. had to get stuff off the floor. working on scubbing and etching for the floor color today. color going on nexed weekend.
going to add 1/8 steel plate over the top.
had to add more bench space. had to get stuff off the floor. working on scubbing and etching for the floor color today. color going on nexed weekend.
Last edited by articwhiteZ; 04-20-2014 at 10:56 PM.
#13
Supreme Member
iTrader: (1)
Re: drag race time is upon us! and a new shop is almost done!
that is a sweeeeet building. i've been trying to get myself financially right for a 30x40. im thinking about doing a 14' tall building so i can do a sort of 2nd story over half of the building. the remaining area would have a lift or 2. 2 lifts would be to store one car over another. im going to have to store a dually, gta, cutlass, and a camaro in there... and i wanted to have some workspace while they are all inside.
#14
Supreme Member
iTrader: (13)
Re: drag race time is upon us! and a new shop is almost done!
My eventual goal is a 40x60. 2 lifts, 1 drive on and one 2 post. A loft on one area. Full bathroom and office area. A tire machine, and a brake lather are all on my wishlist. I basically want a full service shop that is just for me.
#15
Re: drag race time is upon us! and a new shop is almost done!
just got done with the floor prep..now to let it dry for a week. then add the Polyurethane floor color.maby a big red chevy bowtie...who knows..
was at a wedding last year. and the guy had a sweet shop. had a loft for his snow mobiles. and a stand up fork lift to put them in it. full kitchen. shower laundry room. this was about 50 yards from his house. the shop you could drive his log truck in and wash it.and not even track mud to his house...lol
was at a wedding last year. and the guy had a sweet shop. had a loft for his snow mobiles. and a stand up fork lift to put them in it. full kitchen. shower laundry room. this was about 50 yards from his house. the shop you could drive his log truck in and wash it.and not even track mud to his house...lol
Last edited by articwhiteZ; 04-20-2014 at 11:09 PM.
#16
Supreme Member
Re: drag race time is upon us! and a new shop is almost done!
Must be nice to not have any zoning codes to deal with. 40 x 60 "garage" in my backyard... ain't gonna happen.
Last edited by FRMULA88; 04-21-2014 at 07:42 PM.
#17
Supreme Member
Re: drag race time is upon us! and a new shop is almost done!
LOL you would be better off just buying an old service station...
#18
Re: drag race time is upon us! and a new shop is almost done!
im sure there are codes..but i can tell ya the guys who did the loft dont need to have tools of any type!
and i hung drywall to cover the dusty insulation. and to add light. did not tape or mud it...just primer and paint..and more lights.
doing this just for the upgrade on the Z28.. wana nice clean work shop to store the car in and to work in.
floors almost dry from the cleaning & etching
double checking with lacqure thinner to make sure all oils are out of floor.
used a industrial buffer to scrub the floor.with a good degreaser took all the hard work out of it!
Last edited by articwhiteZ; 04-21-2014 at 08:54 PM.
#19
Supreme Member
Re: drag race time is upon us! and a new shop is almost done!
My slab is shot so I get pleasure of busting it out and re-pouring it..
but I can do that 1 bay at a time
Epoxy coating is all about the floor prep. looks like you are taking your time & doing it right !
but I can do that 1 bay at a time
Epoxy coating is all about the floor prep. looks like you are taking your time & doing it right !
#20
Re: drag race time is upon us! and a new shop is almost done!
I'm using a polyurethane floor covering so it has a bit of give to it.that and the fact that it was a closeout at $10 a can. So I bought 10 cans to do two to three coats.
as soon as I get the floor color done...I'll bring in some of the new tool boxes. And start to set out all the parts that I picked up over the last three years. I don't think I forgot anything. It should cover just about half of the shop. sort of like Christmas morning there's so much stuff some of that I forgot what I bought....And then I'll bring my car over.
as soon as I get the floor color done...I'll bring in some of the new tool boxes. And start to set out all the parts that I picked up over the last three years. I don't think I forgot anything. It should cover just about half of the shop. sort of like Christmas morning there's so much stuff some of that I forgot what I bought....And then I'll bring my car over.
Last edited by articwhiteZ; 04-22-2014 at 12:36 PM.
#22
Re: drag race time is upon us! and a new shop is almost done!
Things are moving along. Wish is was a bit warmer.so I could lay rhe floor color down all at the same time.. BUT..we did get the wall base trim done. And 2 coats of floor color at the base of the walls.we got it cut. in and around the workbench. So all we to do is the center of the floor...without getting to close to the walls...about a foot out from them..the cool air make the tack up time a bit longer....24hrs+.
when the second coat is on I won't be able to walk on it for about a week in this weather.
when the second coat is on I won't be able to walk on it for about a week in this weather.
Last edited by articwhiteZ; 04-25-2014 at 06:46 PM.
#24
Re: drag race time is upon us! and a new shop is almost done!
over the last 2 nights we trimmed out the shops floor with 2 coats of the finnish.and last night i painted the floor trim.so when
I got home i could start installing the trim.I also had them shake 4 gals of the floor color. will start with that and see what it covers.
I have 10 gals total...lol
i put the trim in. and made sure no nuts bolts or other small parts would ever go missing. same thing with the work bench. nice and tight. no gaps to drop anything into...
this should add alot of light.. also adding some track lighting. so i can point it at any place i need it.
I got home i could start installing the trim.I also had them shake 4 gals of the floor color. will start with that and see what it covers.
I have 10 gals total...lol
i put the trim in. and made sure no nuts bolts or other small parts would ever go missing. same thing with the work bench. nice and tight. no gaps to drop anything into...
this should add alot of light.. also adding some track lighting. so i can point it at any place i need it.
Last edited by articwhiteZ; 04-25-2014 at 07:32 PM.
#25
Re: drag race time is upon us! and a new shop is almost done!
this stuff looks good..ya just cant breathe while your putting it down!
like the semi gloss shine... floor is going to be nice to work on!
nexed coat sunday afternoon
now to add sprinkles? or not?..lol
like the semi gloss shine... floor is going to be nice to work on!
nexed coat sunday afternoon
now to add sprinkles? or not?..lol
Last edited by articwhiteZ; 04-26-2014 at 10:10 PM.
#27
Supreme Member
Re: drag race time is upon us! and a new shop is almost done!
sprinkles are good to hide flaws in the concrete but it makes it harder to find small items when they are dropped.
I like that color it will reflect alot of light.
when the floor looks crappy you can just clean, scuff, and repaint it ! Depending on how much use / abuse it sees, you may refinish it every 5 years or so.
I will epoxy mine and do rubber tiles (like you see at the gym) at the car bay I work in.
A 10x20 area to contain messes/spills. The tile is easy to clean, protects any parts you may drop (the floor too) and is warmer to stand on / lay on versus concrete.
This is the same material that free weights get dropped on all week long so that says alot.. it's not cheap, but you don't need to cover the whole garage floor with it.
I like that color it will reflect alot of light.
when the floor looks crappy you can just clean, scuff, and repaint it ! Depending on how much use / abuse it sees, you may refinish it every 5 years or so.
I will epoxy mine and do rubber tiles (like you see at the gym) at the car bay I work in.
A 10x20 area to contain messes/spills. The tile is easy to clean, protects any parts you may drop (the floor too) and is warmer to stand on / lay on versus concrete.
This is the same material that free weights get dropped on all week long so that says alot.. it's not cheap, but you don't need to cover the whole garage floor with it.
Last edited by FRMULA88; 04-27-2014 at 08:45 AM.
#28
Member
iTrader: (2)
Join Date: Feb 2010
Posts: 460
Likes: 0
Received 3 Likes
on
3 Posts
Car: '89 Camaro
Engine: LS1
Transmission: 4L65/70E
Axle/Gears: 9 Inch, 3.70 gears
Re: drag race time is upon us! and a new shop is almost done!
I'm still jealous of not having a garage. I think I'd go with sprinkles.
#31
Re: drag race time is upon us! and a new shop is almost done!
almost like fresh concrete. but after looking at the light this stuff adds.
and the $10 a can price..(close out)..i was in for 10 cans of the stuff shops taking 5 gals. so the car garage (2 car) might get a fresh floor..or not thats her space(soon to be wife) and the smell as it drys is over the top...like swimming in laqure thinner..
like the decals on the doors in the above pic...
Last edited by articwhiteZ; 04-27-2014 at 12:55 PM.
#32
Supreme Member
iTrader: (2)
Re: drag race time is upon us! and a new shop is almost done!
this stuff was on sale for $10 a can. it was a med base only. this is about the darkest i could go.what they told me...at first i wanted a med gray floor.
almost like fresh concrete. but after looking at the light this stuff adds.
and the $10 a can price..(close out)..i was in for 10 cans of the stuff shops taking 5 gals. so the car garage (2 car) might get a fresh floor..or not thats her space(soon to be wife) and the smell as it drys is over the top...like swimming in laqure thinner..
like the decals on the doors in the above pic...
almost like fresh concrete. but after looking at the light this stuff adds.
and the $10 a can price..(close out)..i was in for 10 cans of the stuff shops taking 5 gals. so the car garage (2 car) might get a fresh floor..or not thats her space(soon to be wife) and the smell as it drys is over the top...like swimming in laqure thinner..
like the decals on the doors in the above pic...
#33
Re: drag race time is upon us! and a new shop is almost done!
this stuff is a polyurethane floor covering. it's alot easier to work with.(iv used the other stuff epoxy)
if ya get a booger ya can use a craper and some mineral spirits and recoat in the first 24 hrs..easy easy..and ya can fill small cracks with it. right off your roller.
ya can patch small chips or big chips with JB Weld. and coat with this stuff the nexed day..and it's got a bit of a give to it.. ya drop a hammer. it's not chipped. dust mop clean up..super sweet! reg $29 a gal. close out was $10 a gal..rodda paints west cost.side of the states.
pays to shop.
going to do my bench tops also.. i have 5 gals left over...lol
if ya get a booger ya can use a craper and some mineral spirits and recoat in the first 24 hrs..easy easy..and ya can fill small cracks with it. right off your roller.
ya can patch small chips or big chips with JB Weld. and coat with this stuff the nexed day..and it's got a bit of a give to it.. ya drop a hammer. it's not chipped. dust mop clean up..super sweet! reg $29 a gal. close out was $10 a gal..rodda paints west cost.side of the states.
pays to shop.
going to do my bench tops also.. i have 5 gals left over...lol
Last edited by articwhiteZ; 04-27-2014 at 10:35 PM.
#35
Supreme Member
iTrader: (2)
Re: drag race time is upon us! and a new shop is almost done!
How well does the polyurethane paint hold up to sticky tires as compared to the epoxy? I need to do something with my garage floor this year. It's looking bad with paint overspray, oil/fuel stains from the past couple of years projects. I really like the look of your shop, its coming along very well.
#36
Re: drag race time is upon us! and a new shop is almost done!
How well does the polyurethane paint hold up to sticky tires as compared to the epoxy? I need to do something with my garage floor this year. It's looking bad with paint overspray, oil/fuel stains from the past couple of years projects. I really like the look of your shop, its coming along very well.
the dry time is longer then epoxy. 2/3hrs.to touch.. 24hrs to walk on..
its tough stuff. and EASY to use.. just wrap the roller in a plastic bag till you use it the nexed day..even the paint Trey stayed clean...
Last edited by articwhiteZ; 04-30-2014 at 09:52 AM.
#37
Re: drag race time is upon us! and a new shop is almost done!
Well the last thing to do is trim out the window...got the wood cut and in place. Now ill take it down paint it. And put back up... hang all the banners back up...bring in the tool boxes...and its close to getting finished. When I add the support beams to the loft. Its done. Shooting for this week but the floor and walls are done.
#40
Re: drag race time is upon us! and a new shop is almost done!
thanks....want to get started putting my Z28 back together..have to get the front end back on it. and rollback it over to it's new home...i can then pack up my main toolbox and bring it over..it's still at my WA home. 40 miles away..
still have a 40" LCD 1080 tv. and blue ray to install with some comfy chairs for the bench racing fest on sat night. if it's raining...lol
still have a 40" LCD 1080 tv. and blue ray to install with some comfy chairs for the bench racing fest on sat night. if it's raining...lol
Last edited by articwhiteZ; 04-30-2014 at 09:48 PM.
#41
Supreme Member
Re: drag race time is upon us! and a new shop is almost done!
Nice.
I'm happy just to have swept my garage floor!
I'm happy just to have swept my garage floor!
#44
Re: drag race time is upon us! and a new shop is almost done!
left overs are on the left...(sport comp still new) right are procomp liquid filled (2 small ones are for the A piller
there will be some procomp gauges L/Filled also as i got good deals i could not pass up...lol
the tach and all the sport comp Gauges in this pic are coming out and upgrading to ProComp Gauges.
so they will be up for sale.. all are as new.. no nicks or dings.and will come with all parts when pulled.even isolators. for the fuel stuff
doing a gauge panel to fit the 6 procomp gauges below the center Vents...the vents are coming out and turning into the switch panel.
close up yes the B&M Gauge is also going
the switch panel in pic will be coming out also
there will be some procomp gauges L/Filled also as i got good deals i could not pass up...lol
the tach and all the sport comp Gauges in this pic are coming out and upgrading to ProComp Gauges.
so they will be up for sale.. all are as new.. no nicks or dings.and will come with all parts when pulled.even isolators. for the fuel stuff
doing a gauge panel to fit the 6 procomp gauges below the center Vents...the vents are coming out and turning into the switch panel.
close up yes the B&M Gauge is also going
the switch panel in pic will be coming out also
Last edited by articwhiteZ; 05-17-2014 at 03:12 PM.
#45
Re: drag race time is upon us! and a new shop is almost done!
found others that are going to go by by.
this is why digging this stuff out is going to be fun...
this is just the tip.. there is still every other aftermarket part boxed up in that room.. xmas all this weekend
this is why digging this stuff out is going to be fun...
this is just the tip.. there is still every other aftermarket part boxed up in that room.. xmas all this weekend
Last edited by articwhiteZ; 05-17-2014 at 05:31 PM.
#47
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,689
Received 745 Likes
on
505 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: drag race time is upon us! and a new shop is almost done!
I dig the floor color, that's what I did, yellowish. I worked in 2 places that had gray and it made me depressed when I worked in those rooms.
me acting like a goober
me acting like a goober
#48
Re: drag race time is upon us! and a new shop is almost done!
ya the lighter color makes ya look forward to getting out in the shop. and doing things.. i just like walking on it...lol
a few more boxes opend up today..but i was taken away to a BBQ/drinks..
and just got back from the movies (Godzilla) not to bad..
anyway first thing in the AM more boxes and parts getting set out... so i can start a stack of the parts im not going to use..
a few more boxes opend up today..but i was taken away to a BBQ/drinks..
and just got back from the movies (Godzilla) not to bad..
anyway first thing in the AM more boxes and parts getting set out... so i can start a stack of the parts im not going to use..
#50
Supreme Member
Re: drag race time is upon us! and a new shop is almost done!
You have enough "spare parts" to go into business
or you have a hoarding complex.
Should I call Chuck Palumbo to see you? LOL
Any thoughts on selling some of that booty?
or you have a hoarding complex.
Should I call Chuck Palumbo to see you? LOL
Any thoughts on selling some of that booty?