When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Re: Took some pics of the pile the other day. Been sitting for four years
Originally Posted by zacharyhorn
The car needs more tuning but it cruises great. Need to lean out idle more. (12.5-12.8) I like to see mid 13s. Cruise is perfect. WOT is far to lean. 12.7 I saw at full boost.... working on that now.
Anyway, here is a walk around of the car. My back and hip are really messed up so it may be a little shakey. Can barely walk.
Edit. How do I upload a video from my damn iPhone
What's your plans? If it's WOT you could probably enlarge the PVCRs or add vent tube extensions if you don't have them already and that would help out some.
Click on the record button and it will give you the option to upload. It's kind of mis-identified.
Re: Took some pics of the pile the other day. Been sitting for four years
Originally Posted by Drac0nic
What's your plans? If it's WOT you could probably enlarge the PVCRs or add vent tube extensions if you don't have them already and that would help out some.
Click on the record button and it will give you the option to upload. It's kind of mis-identified.
I’ve been tuning with the vent (pitot) tune extensions. I have it right around 10.8 - 11.2 AFR just with tuning those on the street. What do you mean by Click on the record button and it will give you the option to upload. It's kind of mis-identified? This damn phone. I don’t have the internet at my house.
Re: Took some pics of the pile the other day. Been sitting for four years
Zach, you can always text me the video via phone I can host on my youtube if you'd like.
... might need to trim it down though if it is excessive in length.
Originally Posted by Street Lethal
I grabbed a brass 1/4" vacuum fitting and tapped it into the plenum back by the fuel pressure regulator. BOV sounds wicked. Will try to have another video up soon...
Forgot to add a pic for you guys; 1/4 Barb - 3/8 MIP w/high pressure line...
Re: Took some pics of the pile the other day. Been sitting for four years
Originally Posted by zacharyhorn
I’ve been tuning with the vent (pitot) tune extensions. I have it right around 10.8 - 11.2 AFR just with tuning those on the street. What do you mean by Click on the record button and it will give you the option to upload. It's kind of mis-identified? This damn phone. I don’t have the internet at my house.
You go into the YouTube app, at the top there are some icons. There's one of a camera. Click on that. There will be a group of videos that will show up. Click one, enter the information (public vs private, title etc.) and follow through the dialogs.
Re: Took some pics of the pile the other day. Been sitting for four years
Originally Posted by zacharyhorn
Thanks Rob! I’ll try and get a buddy to ride along and take a vid of a 1,2,3 gear pull. 4th is too much for the backroads. Hell, even third is crazy.
Is that a passenger side manifold backwards on the driver side?
That's a clean setup, great job!
If I ever did a turbo again, and that's a big if, I'd probably do twins with integrated waste gates. The crossover, and the piping to the external gate was such a pain in the ***.
Two little guys hanging out by the valve cover, an air/water intercooler up front, and dual 3.5" intake pipes running to both front fenders.
(i know, sounds easy, always comes out like frankenstein)
Re: Took some pics of the pile the other day. Been sitting for four years
Originally Posted by anesthes
Is that a passenger side manifold backwards on the driver side?
That's a clean setup, great job!
If I ever did a turbo again, and that's a big if, I'd probably do twins with integrated waste gates. The crossover, and the piping to the external gate was such a pain in the ***.
Two little guys hanging out by the valve cover, an air/water intercooler up front, and dual 3.5" intake pipes running to both front fenders.
(i know, sounds easy, always comes out like frankenstein)
-- Joe
Thanks for the compliment Joe! The manifold on the driver side is backwards.
Re: Took some pics of the pile the other day. Been sitting for four years
Originally Posted by zacharyhorn
Twin S400 s for my next build. E85A2W. Still need a Ford 9” or Dana S60. And a twin disc.
Is turbo selection better these days then it was 10 years ago? Like can you get a pair of turbos with opposing scrolls? be much cleaner install if you could.
I was thinking a hot 355 with a couple of 46lb/min 50 trim's would make 800hp no problem and be streetable.
Re: Took some pics of the pile the other day. Been sitting for four years
Originally Posted by zacharyhorn
It’s at 800 now. I turned er back down. With the T56 and the Centerforce clutch. Time for a Twin. McLeod or if anything is cheaper.
I sold all the manual stuff years ago and I put a TH350 in the car. It's not as fun to drive as the ZF6 in my c4, but it gets way too expensive to try to get a manual to hold power. And my thoughts were for drag racing the automatic would just be simpler
Re: Took some pics of the pile the other day. Been sitting for four years
Originally Posted by Street Lethal
I chose a semi-expensive transmission route myself, e-trans w/TCI controller.
Thought about another turbo, but it's kinda overkill in my case.
Joe, where is your walk around....?
- Rob
Don't know that I've ever done one. I don't think people really care much for those videos anyway, and everything sounds like crap when recorded on the phone.
Re: Took some pics of the pile the other day. Been sitting for four years
Originally Posted by anesthes
Don't know that I've ever done one. I don't think people really care much for those videos anyway, and everything sounds like crap when recorded on the phone.
-- Joe
You'd be surprised Joe. The younger generation is really starting to like whatever third gen content they can get. If you ever have the time though, definitely squeeze in a walkaround if you can. I myself would love to see one...
Re: Took some pics of the pile the other day. Been sitting for four years
Is turbo selection better these days then it was 10 years ago? Like can you get a pair of turbos with opposing scrolls? be much cleaner install if you could.
surprisingly not as many options on scroll direction to make mirrored looks. nelson racing engines does the mirrored turbo thing and maybe even patented it im not sure. Its a shame cuz alot of guys go twins and mirrored turbos would help a ton
but selection wise they have come along way. There’s substantially many more custom vendors making custom turbos and also alot of china based cheap turbos that are working very well
Re: Took some pics of the pile the other day. Been sitting for four years
Well, took it on a long voyage. Tried to get lost on the backroads going north. Destroyed a 2020 5.0. Not trying. Didn’t even go to 4th... wound up north of Shawano and camped. It was great. Drove home and the AFRs were at 14.8-15.0 all the way. Boost is still a touch rich at 10.9-11.0.
Re: Took some pics of the pile the other day. Been sitting for four years
Nice kill Zachary!
Would have loved to have seen the look on the Mustang owners face lol...
Been trying to get a few guys from NYC and NJ to hit up Atco Dragway before it is gone for good. Should have loads of footage for this thread if that happens. We shall see though cuz its been raining like crazy here lately...
Re: Took some pics of the pile the other day. Been sitting for four years
Originally Posted by Street Lethal
Nice kill Zachary!
Would have loved to have seen the look on the Mustang owners face lol...
Been trying to get a few guys from NYC and NJ to hit up Atco Dragway before it is gone for good. Should have loads of footage for this thread if that happens. We shall see though cuz its been raining like crazy here lately...
- Rob
We need rain bad up here. Our track is up for sale too. Not good. Some bigwig will demo it and build subdivisions there. Next closest track is Union Grove.
Re: Took some pics of the pile the other day. Been sitting for four years
Will share an update. Labor Day weekend, car is back in the garage for the time being. Turbo w/accessories all removed... few welds need to be redone on the headers anyway, will attack it this Winter. Second pair of long tubes back on. Nice guy over in Far Rockaway hooked me up with a set of aluminum '128 L98 heads, even came with screw in guide plates. Gonna work a little porting magic on them if I have some time this weekend, but I need to finish the steam holes because I also picked up a 400 SBC they are eventually going onto. Going back and forth if I should have them punched out to 2.02 from 1.94 when they are resurfaced because I am considering putting them on a 305 to settle some crap with a few friends here in NYC. We'll see though, because then I would have to wait to get the valves punched out when the heads are resurfaced... and I really don't want to go to the machine shop twice. Anyways, let the porting at least begin.
Re: Took some pics of the pile the other day. Been sitting for four years
Nice Rob! Porting is fun. We practice on tbi heads. I’m going for a cruise in this cold blooded son of a bitch. Crap. Still can’t load videos from my phone.
IMG_1821.MOV
Last edited by zacharyhorn; 09-11-2020 at 12:44 PM.
Re: Took some pics of the pile the other day. Been sitting for four years
Figured I would give an update as well. Finished one of the aluminum heads so far. Have not taken them to 2.02, actually talking myself out of it for the time being. Will have a pic of them once the other is finished. Ordering D1X next month, but using the engine in it now for mock up...
Ordered another damn set of eBay long tube headers after selling my last pair. For some reason (not surprised though) this set is really resting on the trans member after already notching it a tad for the last set. It’s also forcing the intermediate pipe to hit the catalytic converter heat shield 7mm bolt that I left on. Just pulled the heat shield off, as well as the trans member to make additional clearance; gonna cut off an additional 1/4” off of each end using a jigsaw. Worried about it’s structural integrity though, might need to box it in other areas away from the long tubes. Sigh it’s always a project...
Re: Took some pics of the pile the other day. Been sitting for four years
Originally Posted by Street Lethal
Figured I would give an update as well. Finished one of the aluminum heads so far. Have not taken them to 2.02, actually talking myself out of it for the time being. Will have a pic of them once the other is finished. Ordering D1X next month, but using the engine in it now for mock up...
Ordered another damn set of eBay long tube headers after selling my last pair. For some reason (not surprised though) this set is really resting on the trans member after already notching it a tad for the last set. It’s also forcing the intermediate pipe to hit the catalytic converter heat shield 7mm bolt that I left on. Just pulled the heat shield off, as well as the trans member to make additional clearance; gonna cut off an additional 1/4” off of each end using a jigsaw. Worried about it’s structural integrity though, might need to box it in other areas away from the long tubes. Sigh it’s always a project...
Re: Took some pics of the pile the other day. Been sitting for four years
Originally Posted by Street Lethal
Notched the trans member, smoothed the cuts with a Dremel. Gave it a shot of gunmetal rustoleum, back on she goes...
It's STILL freaking hitting the trans member...
I'm taking the edges all the way down this time, then boxing the freaking thing away from the tubes. I also see that the drivers side tube is kissing the shifter linkage bracket before it even reaches the trans member, so now I have to shave that freaking thing down a tad too. Oh, and it's also hitting into the undercarriage bracket in which the passenger rear seat belt bolts into lol. Good ole ebay....
Re: Took some pics of the pile the other day. Been sitting for four years
Originally Posted by Street Lethal
...Notched the trans member,
Did my share of surgery on mine too. And this for nothing exotic except to make clearance for the Hedman headers to Flowmaster (no) cat back exhaust y-pipe.
Re: Took some pics of the pile the other day. Been sitting for four years
Oh that is awesome, thank you for posting that as it is putting me to ease knowing I can bring it that far down without it flexing. You did one hell of a job with it too....
Re: Took some pics of the pile the other day. Been sitting for four years
Just gonna throw this pic up here. Engine has since been naturally aspirated, and the exhaust is back on now that the freaking trans member issue is resolved. Just took it out for a datalog to see how she is doing because I took a quick idle vid the other day and she felt really strong. The engine is loving this weather. That kPa just stays like that, damn thing must have forgotten that I removed the turbo charger weeks ago lol. Timing eventually hits 35* just before 3000-RPM, and the kPa is still there lol. Had to let go because the tires refused to hold on the street up top...
Re: Took some pics of the pile the other day. Been sitting for four years
No updates from you guys? You guys are so boring lol...
Under the car has been sorted out. Even now with the trans member no longer hitting the exhaust, it still hit in other areas, so it took some time to get it to where it is now hitting nothing whatsoever. Flowmaster has been back on it for awhile, damn thing sounds just as good as it did back in the day. Dropped idle RPM down to 800-RPM, was getting tired of it being closer to 900-RPM. Also capped RPM at 5500 in the ECU. Runs and drives flawlessly. Revs pretty damn good to 3000, just not as fast as I'd like it to up to 5500. But then again I have been asking way too much from the stock 48mm throttle body all these years. Thinking about getting a 58mm TB and just bypassing the 52mm TB entirely... just for the sake of it revving as fast as I'd like it to, and not from an additional horsepower standpoint. The 58mm TB will be used on the 400 once its done, so it won't be a loss in any way.
Re: Took some pics of the pile the other day. Been sitting for four years
Hey Joe, can you do me a favor with your Formula... can you take a peek at your power steering lines that run underneath the length of the lower radiator housing and tell me where the two bolts that support it bolt into? I have been running that turbo for the last decade, and I bolted the power steering lines to the bottom of the FMIC to support them, but now that it is off, I honestly forgot where they go. Are they in front of, or behind the air dam? And if behind the air dam, this would mean they are bolted to two of the air dam bolts (the inner ones), correct...?
Thanks,
- Rob
Edit: Though the more I look at it... it may in fact bolt to the bottom of the crash support.
Last edited by Street Lethal; 10-15-2020 at 02:39 PM.
Re: Took some pics of the pile the other day. Been sitting for four years
Well highs up in WI are in the mid 30s. Still driving the ol gal. If it dries up I’ll take it out today yet. We got 4” of rain last night... Rob, I’m digging the 400 ci idea! I’ll keep you guys posted. When I put it away when I first tuned with Ethanol, I topped of the tank and added stabil. I found some stabilizer and cleaner from Lucas Oil. Should I top off the tank or run it down? Thanks guys.
Re: Took some pics of the pile the other day. Been sitting for four years
Well... Took out the car. Hauling the mail per usual. Sliding around at 80 mph at full boost like a damn greased hippo. Just wicked. Drag radials won’t hold this power anymore.
Re: Took some pics of the pile the other day. Been sitting for four years
^ Nice
My aluminum heads have been done for awhile now, they were opened up as much as they can possibly go. Still thinking larger valves, but I have time to do that if need be. I scrapped the D1X concept and am going F1X, it just makes more sense with four hundred plus cubes. Been toying with the 305 while waiting for parts to get here for the new/replacement engine; 255 grams/second at 4500-RPM in gear (310-RWHP n/a), and I spin it to 5500-RPM. Air/fuel at 14.7 throughout the VE table, with wideband reporting accurate fueling in relation with commanded fuel, so using injector flow I calculate horsepower to be pretty damn impressive at 5500-RPM for a stock LB9 short block. Almost feel sad pulling it lol, but I don't trust the rings anymore. The 400 is being built the right way in every way imaginable this go around...
- Rob
Last edited by Street Lethal; 10-25-2020 at 12:30 PM.
Re: Took some pics of the pile the other day. Been sitting for four years
Originally Posted by Street Lethal
Hey Joe, can you do me a favor with your Formula... can you take a peek at your power steering lines that run underneath the length of the lower radiator housing and tell me where the two bolts that support it bolt into? I have been running that turbo for the last decade, and I bolted the power steering lines to the bottom of the FMIC to support them, but now that it is off, I honestly forgot where they go. Are they in front of, or behind the air dam? And if behind the air dam, this would mean they are bolted to two of the air dam bolts (the inner ones), correct...?
Thanks,
- Rob
Edit: Though the more I look at it... it may in fact bolt to the bottom of the crash support.
Re: Took some pics of the pile the other day. Been sitting for four years
Originally Posted by Street Lethal
^ Nice
My aluminum heads have been done for awhile now, they were opened up as much as they can possibly go. Still thinking larger valves, but I have time to do that if need be. I scrapped the D1X concept and am going F1X, it just makes more sense with four hundred plus cubes. Been toying with the 305 while waiting for parts to get here for the new/replacement engine; 255 grams/second at 4500-RPM in gear (310-RWHP n/a), and I spin it to 5500-RPM. Air/fuel at 14.7 throughout the VE table, with wideband reporting accurate fueling in relation with commanded fuel, so using injector flow I calculate horsepower to be pretty damn impressive at 5500-RPM for a stock LB9 short block. Almost feel sad pulling it lol, but I don't trust the rings anymore. The 400 is being built the right way in every way imaginable this go around...
- Rob
You should just buy my formula lol. Then I can buy another vette and have two in the garage haha
Re: Took some pics of the pile the other day. Been sitting for four years
Hey guys. Do you know by chance what gauge the factory fuel pump wiring is in these cars? Took mine out again 2 hours out from my house. Turned it up. Insane with the cold weather! All over the road at 105 top of third like a damned greased hippo!
Re: Took some pics of the pile the other day. Been sitting for four years
Originally Posted by zacharyhorn
Hey guys. Do you know by chance what gauge the factory fuel pump wiring is in these cars? Took mine out again 2 hours out from my house. Turned it up. Insane with the cold weather! All over the road at 105 top of third like a damned greased hippo!
16 or 18. It's horrific. I saw significant voltage drop. I got rid of the factory relay and installed a larger 40 amp relay, and ran 8 gauge to the rear of the car when I updated to the LS1 tank and fuel module.
Re: Took some pics of the pile the other day. Been sitting for four years
Guys, with no local track anymore to fool around in, it's been boring as hell... especially with the amount of rain we've been getting here. Spare time away from work has me trying to get the stock TPI system to hit 0 to 6000-RPM (0% TPS to 100% TPS) in less than one second (P/N). Getting closer and closer, I'll be happy with it being a tad over one second. Still has the 48mm throttle body, which is great in terms of throttle response. Only thing aftermarket with this LB9 now that the turbo has been removed is the cam and injectors (and Cometic head gaskets, which actually brought static compression down to 9:0), everything else is absolutely stock (albeit heavily ported throughout). Will try to have the green line (mph) in the screen shot as soon as the damn rain subsides if anyone is curious what it should average in the 1/4 mile naturally aspirated...
Re: Took some pics of the pile the other day. Been sitting for four years
Originally Posted by anesthes
16 or 18. It's horrific. I saw significant voltage drop. I got rid of the factory relay and installed a larger 40 amp relay, and ran 8 gauge to the rear of the car when I updated to the LS1 tank and fuel module.
-- Joe
Thanks Joe. I was starting to think I was running out of pump at the top of third. It goes lean when it spoils. Guessing 850 hp or so where it is now. I’m going to do what you did and see if this helps.
I just picked up a frame-off restoration c3 vette, and need the room.
-- Joe
I absolutely dig this! I don’t think I have ever seen the motor / blower setup on this. Do you have some pics? I see you’re state requires front plates as well. WI does as well but I don’t run one since all the Corvette guys don’t. Very clean car Joe!
Re: Took some pics of the pile the other day. Been sitting for four years
Originally Posted by zacharyhorn
I absolutely dig this! I don’t think I have ever seen the motor / blower setup on this. Do you have some pics? I see you’re state requires front plates as well. WI does as well but I don’t run one since all the Corvette guys don’t. Very clean car Joe!
Thank you. It's not quite show quality but it makes good power.
I have the car for sale complete, or I'd be interested in selling the blower setup too. I've thought about putting the motor (as naturally aspirated) in the c3 and tossing an LT1 in the third gen. I have a few LT1s in the shop.
Re: Took some pics of the pile the other day. Been sitting for four years
Originally Posted by anesthes
Thank you. It's not quite show quality but it makes good power.
I have the car for sale complete, or I'd be interested in selling the blower setup too. I've thought about putting the motor (as naturally aspirated) in the c3 and tossing an LT1 in the third gen. I have a few LT1s in the shop.
07-23-2020, 09:22 AM
