Procharger air intake help
#2
Supreme Member
iTrader: (16)
Re: Procharger air intake help
Do you need a Procharger specific elbow, or any elbow that would match your setup?
- Rob
Edit: I buy from the below all the time, so I will vouch for them in terms of checkout security...
http://www.siliconeintakes.com/alumi...ipe-p-286.html (3")
http://www.siliconeintakes.com/alumi...ipe-p-288.html (4")
- Rob
Edit: I buy from the below all the time, so I will vouch for them in terms of checkout security...
http://www.siliconeintakes.com/alumi...ipe-p-286.html (3")
http://www.siliconeintakes.com/alumi...ipe-p-288.html (4")
Last edited by Street Lethal; 05-20-2020 at 05:52 AM.
#3
Supreme Member
iTrader: (20)
Re: Procharger air intake help
Check with brutespeed maybe? Procharger dealers
https://shop.brutespeed.com/ProCharg...550.htm?page=2
https://shop.brutespeed.com/ProCharg...550.htm?page=2
#5
Senior Member
iTrader: (4)
Re: Procharger air intake help
I used a 90 silicone hose and cut it to the required angle. Provided a nice tight bend right at the SC. Of course you only have one attempt so be accurate. Then extended the 4” tubing as high as possible to let the filter pickup some cooler air from back of hood. Definitely not ideal, but is functional.
#8
Member
Join Date: Apr 2006
Location: Morrison IL
Posts: 221
Likes: 0
Received 1 Like
on
1 Post
Car: 88 GTA, 74 T/A
Engine: 383 stroker (Procharged)
Transmission: TH400 w/brake (new 2013)
Axle/Gears: 12-Bolt S60 - 3.73 (new 2013)
Re: Procharger air intake help
This is my air intake system, wanted to avoid pulling in all the header heat by adding an extension pipe.
Last edited by TransAmGTA88; 06-18-2020 at 08:13 AM.
Thread
Thread Starter
Forum
Replies
Last Post