what ya think about this build
01-12-2009, 07:29 PM
#1
Member
Thread Starter
Join Date: Dec 2006
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 camaro z28
Engine: 350sbc
Transmission: TKO 600
Axle/Gears: stock axle with 4.11's
what ya think about this build
i posted this also in the engine build but thought it fits both sections...
what do you think about this build:
Edelbrock e-tech supercharger (which is a Magnuson MP122 supercharger)
http://store.summitracing.com/partdetail.asp?autofilter=1∂=EDL-1553&N=700+0&autoview=sku not sure if im going to get it with the edelbrock carb or go with a holley supercharger carb thats 750cfm
350 block bored and stroked to a 383
put together with a eagle specialties rotating kit http://store.summitracing.com/partde...0&autoview=sku
afr 195 street heads
http://store.summitracing.com/partdetail.asp?autofilter=1∂=AFR-1038&N=700+115&autoview=sku
havnt decided on a cam yet...
im not exactly an expert on engine builds...so wanted to get your opinions...and make sure im building this right the first time...i would like 500 wheel hp but id be happy with 450 and around same for tq #'s
i am going superchargerd...just need to figure out all the details so i can price it all and get it put together and in the car...dont worry about the trans or rearend...i have a tremec tko 600 trans...and soon i will be getting a 12 bolt moser rear put in....so any other advice would be great thx...if you think i can build it cheaper and reach those power numbers plz point it out for me...and dont tell me nos...thx
Joe
what do you think about this build:
Edelbrock e-tech supercharger (which is a Magnuson MP122 supercharger)
http://store.summitracing.com/partdetail.asp?autofilter=1∂=EDL-1553&N=700+0&autoview=sku not sure if im going to get it with the edelbrock carb or go with a holley supercharger carb thats 750cfm
350 block bored and stroked to a 383
put together with a eagle specialties rotating kit http://store.summitracing.com/partde...0&autoview=sku
afr 195 street heads
http://store.summitracing.com/partdetail.asp?autofilter=1∂=AFR-1038&N=700+115&autoview=sku
havnt decided on a cam yet...
im not exactly an expert on engine builds...so wanted to get your opinions...and make sure im building this right the first time...i would like 500 wheel hp but id be happy with 450 and around same for tq #'s
i am going superchargerd...just need to figure out all the details so i can price it all and get it put together and in the car...dont worry about the trans or rearend...i have a tremec tko 600 trans...and soon i will be getting a 12 bolt moser rear put in....so any other advice would be great thx...if you think i can build it cheaper and reach those power numbers plz point it out for me...and dont tell me nos...thx
Joe
Thread
Thread Starter
Forum
Replies
Last Post