Need good Blower cam
#1
Senior Member
Thread Starter
Join Date: Mar 2003
Location: vacaville,ca
Posts: 847
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1988 camaro z28,1997 camaro lt1
Engine: 355 afr 195 heads,tpis big mouth
Transmission: 700r-4 built by me 3-4 z pack
Axle/Gears: 3.42
Need good Blower cam
I need a good blower cam for my camaro 5.7 0.30 over new afr 195 heads,the
cam i have now slp 502/510 lift,220/230 dur 112 lsa.the springs on my new afr are 600 lift.i need more power
cam i have now slp 502/510 lift,220/230 dur 112 lsa.the springs on my new afr are 600 lift.i need more power
#2
Senior Member
Thread Starter
Join Date: Mar 2003
Location: vacaville,ca
Posts: 847
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1988 camaro z28,1997 camaro lt1
Engine: 355 afr 195 heads,tpis big mouth
Transmission: 700r-4 built by me 3-4 z pack
Axle/Gears: 3.42
Re: Need good Blower cam
good info,thanks guys
#3
Member
Join Date: Jun 2007
Location: Bham AL
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Car: '92 RS
Engine: 357ci
Transmission: G-Force t-5
Axle/Gears: 4.10 10bolt mini spool
Re: Need good Blower cam
The cam you have listed should be an excelent shaft for 500-600 hp with 10-12psi boost. More lift wont really help ya that much, the blower is gonna force all the fuel/air in that it can reguardless of lift. A set of 1.6 rockers will give you .535/.544 lift and change the duration slightly. But that shaft should run like a demon.
#5
Senior Member
Thread Starter
Join Date: Mar 2003
Location: vacaville,ca
Posts: 847
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1988 camaro z28,1997 camaro lt1
Engine: 355 afr 195 heads,tpis big mouth
Transmission: 700r-4 built by me 3-4 z pack
Axle/Gears: 3.42
Re: Need good Blower cam
thanks i will use the slp cam.
Thread
Thread Starter
Forum
Replies
Last Post