5literTPIterror

um, i may have a problem, what do we do if we DID make it payable to BBS Designs???!!!???

please get back to me via PM or email,
I cant exactly afford to have checks floating around for 500+ dollars

thank you,
keith burch
kburch5647@yahoo.com

BBSDesigns

Keith, dont worry. I talked to a friend of mine in the bank and they accepted the money order, nothing to worry about. Your order is in for the V belt header with the T3 flange!!

BANDITSBC

It's done, payment has been sent, now i can start going through the summit catalog looking for injector, snow performance, intake manifold, calling around for a good exhaust shop, a gm block, pistons, heads, cam, wow, i don't think i have any money for the other stuff! well at least i'll have the turbo manifold!!!!

thanks BBS for doing one last run.

BBSDesigns

Only six days more to go!!

metalhead212121

don't worry... Im almost in the SAME exact boat as you. I just have a boxs of parts sitting in my house totalling at least a couple thousand dollars...

Dan

FerrMaro

Hello Senor BBS! I would like to order a single turbo header for a V-belt pulley system. Thank you soo much for offering a last run of these! Will you please PM me with total cost for shipping to California? I will have a money order in the mail as soon as I here from you.

tgould_316

BBS:

I would like to place my order for a Race Single Turbo Header for Serpentine Belt setup and I would like to keep my AC. I hope this won't be a problem. I will also send an email with my shipping information. Please PM me with the total cost to ship to Virginia, so I can get my check to you as soon as possible.


Thanks,
Tony

Greasemonkey

To the two previous posters: $30 parcel post and $58 for priority mail. He already posted this info.

battman

iTrader: (2)

PM sent, I have money ready in my paypal account.

BBSDesigns

That is correct; $30.00 for Parcel Post or $58.00 for Priority once it's been fabricated(for US only except Alaska and Hawaii, all other countries please email me). Paypal fee of $15.00 for single turbo header/ $30.00 for twin turbo headers. Fabrication begins on June 30th.

BBSDesigns

Today is D' day!! Last day folks!

Here are the ones getting their headers so far(till today Jun30):

1)Alexander Lipper from IL 60126, "V" belt single turbo header.
2)Jaime Vazquez from PA 19044, "V" belt single turbo header.
3)Keith Burch from NY 12831, "V" belt single turbo header with T3 flange.
4)Daniel Start from NJ 07424, Street & Strip twin turbo headers with ceramic coating.
5)James Atkins from MI 49120, "V" belt single turbo header.
6)Robert Batt from AL 35773, "V" belt single turbo header.
7)David Jackson from IN 46012, "V" belt single turbo header.

Street Lethal

iTrader: (16)

^ Was contemplating throwing my two turbo's on my '91 TPI Formula, but was told that the turbo's were too big for your TT header design though. Had they been able to fit, my order would have been placed weeks ago....

revelz

what size turbos are those?

BBSDesigns

Update July 2, 2007

Final Buyers List:

1)Alexander Lipper from IL 60126, "V" belt single turbo header.
2)Jaime Vazquez from PA 19044, "V" belt single turbo header.
3)Keith Burch from NY 12831, "V" belt single turbo header with T3 flange.
4)Daniel Start from NJ 07424, Street & Strip twin turbo headers with ceramic coating.
5)James Atkins from MI 49120, "V" belt single turbo header.
6)Robert Batt from AL 35773, "V" belt single turbo header.
7)David Jackson from IN 46012, "V" belt single turbo header.
8)Danny Jaramillo CA 91201, "V" belt single turbo header.
9)Anthony Gould VA 22556, Serpentine belt single turbo header.

Thank you all for your support!! I will be keep this thread updated with shipping information for each one of you.
There's going to be war out there with all these new turbo and twin turbo V8's
Edgardo

Dents

iTrader: (4)

Aww dammit, figures I find this thread 3 days after cutoff date. Nooooo!

5literTPIterror

i was just wondering how the headers were coming?
i cant wait to rip off my hooker cat back and passenger side header and get fabbing!!

also has anyone heard good or bad things about the demon blowthrough carbs in jegs?
im getting ready to buy a BT carb, victor jr, and complete fuel system(holy sh*t; expensive.)

5literTPIterror

Final Buyers List:

1)Alexander Lipper from IL 60126, "V" belt single turbo header.
2)Jaime Vazquez from PA 19044, "V" belt single turbo header.

have either of you heard anything about progress of headers??

metalhead212121

x2... Im kinda wondering too if anybody has heard from BBS Designs.. Granted Im #4 on the list but at the same time if I got my headers delivered to me yesterday I couldnt installed them due to lack of knowledge.. $$$... ect ect.

If I hear from BBS Designs I post it...

Dan

revelz

i havent hear or received nothing yet, cant wait to get it cause im putting the kmember on it at the same time. im #2 by the way.

formula350sd

iTrader: (2)

I have'nt heard anything yet I dont know when I'm going to go to the turbo but I had to have the headder I wanted one years ago but could never find the money this was my chance and I took it


Oh yeah I'm number 1 that means I'm better than all you
LOL

Street Lethal

iTrader: (16)

Formula350SD, do you at least have a phone number to reach out to? I too was contemplating these turbo headers, but I missed the deadline....

BBSDesigns

I heard that he ran away with all the money and now is somewhere picking shells on the beach...


Just kidding, no beach but lots of carbide and metal dust. I am working on all the headers at the same time, its quicker. Hopefully you all will be receivng tracking numbers by the end of July-start of August.

Edgardo.

400Z28Racer

iTrader: (4)

are you still taking orders? i Know it is already past the cut off day, but I rarely check this board

Street Lethal

iTrader: (16)

^ What he said.....

BANDITSBC

good to hear from you man!!!

BBSDesigns

Ok, finally after lots of work I managed to make some serious progress. The following names are going to have their headers shipped this Saturday (Sept 8, tomorrow).

1)Alexander Lipper from IL 60126, "V" belt single turbo header.
2)Jaime Vazquez from PA 19044, "V" belt single turbo header.
3)James Atkins from MI 49120, "V" belt single turbo header.
4)Robert Batt from AL 35773, "V" belt single turbo header.
5)David Jackson from IN 46012, "V" belt single turbo header.

The following names will have their headers shipped no later than the next Saturday after this one (Sept 15).

1)Daniel Start from NJ 07424, Street & Strip twin turbo headers with ceramic coating. (Daniel, yours are done, waiting for the ceramic coating only)
2)Danny Jaramillo CA 91201, "V" belt single turbo header.
3)Anthony Gould VA 22556, Serpentine belt single turbo header.
4)Cory Shamblen FL 32507, "V" belt single turbo header.

As soon as I come back from the post office I will put the tracking numbers here on the thread, most probbably on the night.

Thank you all for your patience!!! This is why this is definately going to be the last run, I DONT HAVE TIME!!!! ARGGG!!!!

Edgardo

battman

iTrader: (2)

revelz

awesome

BANDITSBC

may each of us make you proud at every dragstrip, every car show, every magazine that we are involved in!

BBSDESIGNS BBSDESIGNS BBSDESIGNS!!!!!!

thank you
jim

Street Lethal

iTrader: (16)

....

5literTPIterror

Hey Edgardo,
I know youre busy just wondering if you could send me that refund when you get a few free minutes.
I need that money in order to get my Nova finished up and to the track as sooon as possible.
Thank Youuu,
Keith Burch

battman

iTrader: (2)

Did they ship, anyone get tracking numbers?

BBSDesigns

Bad and Good news,

Bad news first is that unfortunately I did not send the headers last Saturday like promised . I ran into several situations that kept me from going to the post office.

Good news are that each and every header has been finished and that they are all going to be shipped definately this next week. For those of you that may need some proof not to worry (since I've been late with the shipping) here is a picture I took while still finishing them.

Keith, as soon I go to the post office to ship these headers I will send you the refund, I havent got the chance to go before.

Daniel, your twin turbo headers are on the ceramic treatment, I will pick them up and send them also, that's the reason why they are not on the picture.

Take care everyone,
Edgardo

V8Astro Captain

iTrader: (1)

Edgardo, I sent a PM.

iansane

iTrader: (1)

Is that an extra header?

BANDITSBC

Just to let you know my BIRTHDAY is Sept 30th!!!!

Hint Hint!!!!!

how are they coming??? what's up with the shipping?

metalhead212121

anybody here anything????

battman

iTrader: (2)

Nope, BBS can you give us a shipping update?

revelz

Any updates?? my car is apart and im getting tired of waiting

BANDITSBC

hey guys,

i just talked to edgardo, he said he's very sorry for the long delay. from what he says he was waiting for a couple flanges that he finally got. his carbide bits were getting dull and wasn't able to finish porting all the manifolds. he's working on that issue to be resolved soon.

its very difficult to do side work like this when you have a full time job and family. i know it took me 1 1/2 months to do a headgasket on my aunts car. this is why he's not making them anymore and we knew that.

i think we'll see it pretty soon. and when we do we'll know we didn't get that cheap crap on ebay!

ps. Jaime- ed said he called you back today but got a lady and was on hold for a long time.

jim

revelz

sorry i came up a little **** off, i didn't mean it m just got the car apart and im selling the procharger and long tubes to do the turbo convertion, i called him from work nobody at work told me that he called. i just got my turbo and installed my kmember. now i feel like crap sorry. next time ill talk in spanish been that im from PR too.

PS anybody looking for a P600b supercharger kit, long tube headers and mufflex Ypipe?????

gta324

http://cgi.ebay.com/ebaymotors/SBC-C...QQcmdZViewItem

looks like bbs design..........

Greasemonkey

Yep, the Chinese rip offs. I've contemplated purchasing that simply for the drivers header and the crossover. However, I've heard that the crossover hits the oil pan and basically fits like crap. It may still just be easier to build my own crossover.

5literTPIterror

waiting patiently, for my 540 bucks back....


My '71 nova is waiting to get to the track which is only open till october 31, and just had to put my MSD BTM and billet distributor on a credit card....


-Keith

metalhead212121

To me.. this group purchase is a little dissapointing.. I understand that Edgardo is busy with running his own business.. family affairs AND doing headers for us on the side but its just a little dissapointing that some of you guys have had to call him to find out whats going on. Im not in any rush to do to lack of funds for turbos.. intercooler.. piping.. ect ect. but it would be nice of him to drop by periodically drop by thirdgen.org and give us quick updates. Hopefully in the end everybody will get what they paid for (good quality product) and 5literTPIterror will get his money back with a note attached... (Sorry....... )

Edgardo- due to the fact that some people are looking for their headers you can send mine out last (even though I was one of the first ones to pay you ) It DOESNT mean I DON'T want what I paid for.. I'd just rather let other get their projects going

Dan

battman

iTrader: (2)

Is there any estimated shipment date?

luke4907

iTrader: (5)

since the one guy wants his money back, does that mean there's gonna be an extra set of turbo headers for sale?

Eats5.0's

iTrader: (1)

Was wondering the same..

5literTPIterror

Any information would be nice at this point..

battman

iTrader: (2)

I thought they were done almost a month ago. Whats the hold up now?