Paxton SC Oil Cooler
08-09-2004, 02:03 PM
#1
Paxton SC Oil Cooler
I am building the oil cooler system for my Paxton SN93. I have found the dipstick and a Derale twin flow cooler with the 10 inch fan. I need to have some idea of what pump to use for transmission fluid. I have tested a cheap Purolator fuel pump, it will pump the trans fluid by itself, but it won't pump through the cooler and back up to the blower.
I have entertained the idea of using a Holley Red Pump, but any ideas will be great before I jump into that....
I have also looked at www.jcperformance.com , but $350 for a cooler setup (for a POS Paxton, no less) is a little much....
Kevin
I have entertained the idea of using a Holley Red Pump, but any ideas will be great before I jump into that....
I have also looked at www.jcperformance.com , but $350 for a cooler setup (for a POS Paxton, no less) is a little much....
Kevin
08-14-2004, 01:03 PM
#3
Senior Member
Join Date: Mar 2003
Location: vacaville,ca
Posts: 847
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1988 camaro z28,1997 camaro lt1
Engine: 355 afr 195 heads,tpis big mouth
Transmission: 700r-4 built by me 3-4 z pack
Axle/Gears: 3.42
where did you find the dipstick tube at.
I would have gotten the complete cooler with the pump but he didnt have it.
06-24-2010, 08:28 PM
#6
Junior Member
Join Date: Jun 2010
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Re: Paxton SC Oil Cooler
I am building the oil cooler system for my Paxton SN93. I have found the dipstick and a Derale twin flow cooler with the 10 inch fan. I need to have some idea of what pump to use for transmission fluid. I have tested a cheap Purolator fuel pump, it will pump the trans fluid by itself, but it won't pump through the cooler and back up to the blower.
I have entertained the idea of using a Holley Red Pump, but any ideas will be great before I jump into that....
I have also looked at www.jcperformance.com , but $350 for a cooler setup (for a POS Paxton, no less) is a little much....
Kevin
I have entertained the idea of using a Holley Red Pump, but any ideas will be great before I jump into that....
I have also looked at www.jcperformance.com , but $350 for a cooler setup (for a POS Paxton, no less) is a little much....
Kevin
06-24-2010, 08:32 PM
#7
Junior Member
Join Date: Jun 2010
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Re: Paxton SC Oil Cooler
i have a sn 2000 on my 90 gt with a pump from paradice wheels out of Cal. The guy there you need to speak with is Craig. Their pumps are alot cheaper than your alt. rout and work fine. Ive had there set up for over 10 years without any trouble. The only complaint I have is they qiut making paxatrac fluild, so that means your down at least 5 psi of boost on reg trans. fluid.
Trending Topics
07-11-2010, 10:25 PM
#8
Re: Paxton SC Oil Cooler
WOW! Blast from the past! I started this thread 6 years ago...... I talked to Craig at Paradise wheels at the time..... too much money for it all. I'm not sure that they are still in business.
I sold the Paxton to another Thirdgen member a number of years ago.
Kevin
I sold the Paxton to another Thirdgen member a number of years ago.
Kevin
Thread
Thread Starter
Forum
Replies
Last Post
tyeo098
Tech / General Engine
38
11-30-2015 06:27 PM
skinny z
Engine/Drivetrain/Suspension Parts for Sale
5
10-05-2015 06:23 PM
