Flat tappet cam
#1
Moderator/TGO Supporter
Thread Starter
Join Date: May 2001
Location: Bloomingdale, IL , United States
Posts: 2,481
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1997 Z28
Engine: LS1
Transmission: T56
Axle/Gears: 3.42
Flat tappet cam
Looking for a good flat tappet cam for a 305 TPI. Something in the range of 210 to 220 degrees duration intake/exhaust. Less than .480 lift to stay safe with stock heads.
Looking for something cheap. Used is okay as long as the lifters can be paired with the lobe they were on and there isn't much wear. Stock '85 cam would be okay as well, but prefer aftermarket.
Looking for something cheap. Used is okay as long as the lifters can be paired with the lobe they were on and there isn't much wear. Stock '85 cam would be okay as well, but prefer aftermarket.
#2
TGO Supporter
iTrader: (1)
Join Date: Sep 2002
Location: ELGIN, ILL 60123
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 IROC Z
Engine: 454
Transmission: 350
I have a LUNATI 00016 cam & lifter set brand new !!!! & no shipping 'cause I live in Elgin !!!! $100 Look it up on there web site for the #'s !!!! MEL 1-847-888-1463 home 1-847-987-2451 cell 248/284 duration .458 lift 1500-5200 RPM range !!!!
Last edited by 89 IROC DROP TOP; 02-08-2006 at 07:25 PM.
#3
Member
iTrader: (1)
Join Date: Nov 2003
Location: TX
Posts: 412
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Firebird SE
Engine: 388 sbc, Brodix Track 1s
Transmission: turbo 350 transmission
Axle/Gears: 4.10 gears
I have a good street hyd flat tappet cam for the 305. TRW 204-214 dur. Used for about 7 hours just to get the engine running correctly. $50 and can pick up a set of Summit lifters for about $40 or the TRW lifters for $49. I kept the lifter for my other cam I put in the engine.
Thread
Thread Starter
Forum
Replies
Last Post