engine and tranny and other stuff
#1
Member
Thread Starter
iTrader: (1)
Join Date: Aug 2004
Location: NH
Posts: 194
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Z28
Engine: LQ9 W/ Howards ASA cam+Fast 90
Transmission: T56 Mgw shifter
Axle/Gears: Currie 9inch w 4.30 gears
engine and tranny and other stuff
hey guys im putting a 350 in my 84z and will have a 305 and a 700r4 left over
1) the 305 is rebuilt but by whom i dont know seems to have a little cam ran good leakdown a cylinder and it was like 6 -8 percent so it seems tight but i only did like one or two cylinders ran a 15.4 i think in my car with the tranny slipping maybe ...100$
2) the 700r4 is original as far as i know basicly it needs to be rebuilt i installed a covette servo and a boost valve and replaced a broken 1-2 acumulator springs and it stopped slipping but that might just be a band-aid type thing.. 100$
3) i also have a holley 4160 600cfm carb with a newly installed 4150 conversion all new gaskets and acclerator, pump electric choke, ..90$
4) one summit racing cam and lifter set brand new 204/214 @.050 424/446 i think ,I also have an edelbock timing chain set i can get the part number if you want it 40 for cam 20 for timing set
im open to offers
(reasonable)
steve
i cant Ship the engine or tranny so they are pickup only but the cam and carb i can ship let me know
1) the 305 is rebuilt but by whom i dont know seems to have a little cam ran good leakdown a cylinder and it was like 6 -8 percent so it seems tight but i only did like one or two cylinders ran a 15.4 i think in my car with the tranny slipping maybe ...100$
2) the 700r4 is original as far as i know basicly it needs to be rebuilt i installed a covette servo and a boost valve and replaced a broken 1-2 acumulator springs and it stopped slipping but that might just be a band-aid type thing.. 100$
3) i also have a holley 4160 600cfm carb with a newly installed 4150 conversion all new gaskets and acclerator, pump electric choke, ..90$
4) one summit racing cam and lifter set brand new 204/214 @.050 424/446 i think ,I also have an edelbock timing chain set i can get the part number if you want it 40 for cam 20 for timing set
im open to offers
(reasonable)
steve
i cant Ship the engine or tranny so they are pickup only but the cam and carb i can ship let me know
Thread
Thread Starter
Forum
Replies
Last Post
Zachattack0925
Tech / General Engine
2
08-12-2015 09:54 PM
Zachattack0925
Transmissions and Drivetrain
4
08-12-2015 09:52 PM