Cat out of the bag...
#1
Member
Thread Starter
Join Date: Dec 2000
Location: sacramento,ca. usa
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc,2012 eco 150,roadglide
Engine: zz4
Transmission: t56
Cat out of the bag...
O.K I have been away for awhile. In my absence, I see some of you are now running S.C.'s.....
I got a few surprises under the rocks hood now as well. I was not too happy with my last set up and decided to ditch the tpi
I am home today and want to post some motor pics, but have not done it in the past correctly. I have my digi camera, but can someone remind me how to do it?
I will give you a clue regarding my new set-up....
I won't be working with trouble codes ever again...
No SES light worries....
I got a few surprises under the rocks hood now as well. I was not too happy with my last set up and decided to ditch the tpi
I am home today and want to post some motor pics, but have not done it in the past correctly. I have my digi camera, but can someone remind me how to do it?
I will give you a clue regarding my new set-up....
I won't be working with trouble codes ever again...
No SES light worries....
#4
Member
Thread Starter
Join Date: Dec 2000
Location: sacramento,ca. usa
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc,2012 eco 150,roadglide
Engine: zz4
Transmission: t56
Re: Cat out of the bag...
THANKS!
AM CLOSE TO FIRING IT UP.
STILL NEED TO ADDRESS FUEL DELIVERY. AND MY STOCK HOOD WON'T FIT ANYMORE.
AM CLOSE TO FIRING IT UP.
STILL NEED TO ADDRESS FUEL DELIVERY. AND MY STOCK HOOD WON'T FIT ANYMORE.
Trending Topics
#9
Member
Thread Starter
Join Date: Dec 2000
Location: sacramento,ca. usa
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc,2012 eco 150,roadglide
Engine: zz4
Transmission: t56
Re: Cat out of the bag...
THANKS GUYS-
THE AIR CLEANER IS A PROFORM DROP BASE AND A SUMMIT TOP. THE PLAN WAS TO FIT THIS UNDER THE HOOD. WON'T FIT. I ORDERED A GOODMARK STEEL HOOD 4" COWL. I MAY RUN A 5" ELEMENT WITH A FOAM SURROUND TO MEET THE HOOD TRUE COWL INDUCTION.
DID ANYONE NOTICE THE FASTBURN HEADS AND MEDIUM RISE HOLLEY VORTEC? I HOPE THIS THING SCREAMS. I CHANGED OUT THE SLP 1 5/8 AND NOW HAVE COATED SLP 1 3/4 HEADERS HOPEFULLY ALL THE POWDERCOATING WILL SURVIVE. SO WHO CAN TUNE A HOLLEY 750 D.P.? STILL RUNNING THE HOTCAM.
----------
FORGOT TO MENTION.................
NEVADA PLATED NOW
THE AIR CLEANER IS A PROFORM DROP BASE AND A SUMMIT TOP. THE PLAN WAS TO FIT THIS UNDER THE HOOD. WON'T FIT. I ORDERED A GOODMARK STEEL HOOD 4" COWL. I MAY RUN A 5" ELEMENT WITH A FOAM SURROUND TO MEET THE HOOD TRUE COWL INDUCTION.
DID ANYONE NOTICE THE FASTBURN HEADS AND MEDIUM RISE HOLLEY VORTEC? I HOPE THIS THING SCREAMS. I CHANGED OUT THE SLP 1 5/8 AND NOW HAVE COATED SLP 1 3/4 HEADERS HOPEFULLY ALL THE POWDERCOATING WILL SURVIVE. SO WHO CAN TUNE A HOLLEY 750 D.P.? STILL RUNNING THE HOTCAM.
----------
FORGOT TO MENTION.................
NEVADA PLATED NOW
Last edited by irocdaddy; 07-18-2008 at 11:19 AM. Reason: Automerged Doublepost
#11
Member
Join Date: Sep 2006
Location: Sacramento,Ca,
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Iroc Z,2004 Z06 Corvette
Engine: 5.7 L98 tpi/LS6 346 ci
Transmission: 700r4/MN12
Axle/Gears: 10 bolt 3.23/DTE 3.42
Re: Cat out of the bag...
nice setup looks great
#13
Re: Cat out of the bag...
After you finish the text of your post click on the little paper clip next to the smilie face. That will pop open and window then click on the browse button and go to where your pictures on stored on your computer. Select the pics you want and then click the upload button.
#14
Supreme Member
iTrader: (1)
Join Date: Jul 2002
Location: sacramento, ca USA
Posts: 2,789
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc-z 5.7tpi 350,
Engine: 5.7tpi 350,
Transmission: T-56 fully built WOOHOO
Re: Cat out of the bag...
glad to see you back,
man shes lookin clean ive always loved your iroc red hardtop black interior g92
let me know when you get that puppy fired up
man shes lookin clean ive always loved your iroc red hardtop black interior g92
let me know when you get that puppy fired up
#15
Member
Thread Starter
Join Date: Dec 2000
Location: sacramento,ca. usa
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc,2012 eco 150,roadglide
Engine: zz4
Transmission: t56
Re: Cat out of the bag...
WILL DO ERIC-
CURRENTLY I AM BEING SIDE TRACKED BY MY RECARO SEAT PROJECT. I HAVE 4 OF EM' REAL BEAT UP, BUT NOT TOTAL LOSSES. 2 ARE 1984 T.A. SEATS AND 2 ARE AFTERMARKET LATE 70'S EARLY 80'S...
MY 4" COWL HOOD ARRIVED FROM GOODMARK DENTED, BUT WILL POST PICKS ONCE I GET ANOTHER AND FIT IT.
TERRELL IS COMING BY ON SAT. TO GET A HEADLINER...
CURRENTLY I AM BEING SIDE TRACKED BY MY RECARO SEAT PROJECT. I HAVE 4 OF EM' REAL BEAT UP, BUT NOT TOTAL LOSSES. 2 ARE 1984 T.A. SEATS AND 2 ARE AFTERMARKET LATE 70'S EARLY 80'S...
MY 4" COWL HOOD ARRIVED FROM GOODMARK DENTED, BUT WILL POST PICKS ONCE I GET ANOTHER AND FIT IT.
TERRELL IS COMING BY ON SAT. TO GET A HEADLINER...
#17
Member
Thread Starter
Join Date: Dec 2000
Location: sacramento,ca. usa
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc,2012 eco 150,roadglide
Engine: zz4
Transmission: t56
Re: Cat out of the bag...
TPI ALL GONE!
THOSE PIECES WENT FOR HIGH DOLLARS....
TPIS STUFF.
MY NEW VORTEC/FASTBURN SET UP WILL SMOKE MY OLD TPI
THOSE PIECES WENT FOR HIGH DOLLARS....
TPIS STUFF.
MY NEW VORTEC/FASTBURN SET UP WILL SMOKE MY OLD TPI
#18
Supreme Member
iTrader: (1)
Join Date: Jul 2002
Location: sacramento, ca USA
Posts: 2,789
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc-z 5.7tpi 350,
Engine: 5.7tpi 350,
Transmission: T-56 fully built WOOHOO
Re: Cat out of the bag...
well have to see what shell do you had nothin but torque
#19
Member
Thread Starter
Join Date: Dec 2000
Location: sacramento,ca. usa
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc,2012 eco 150,roadglide
Engine: zz4
Transmission: t56
Re: Cat out of the bag...
HMMN, THIS SET UP IS REALLY THE ZZ430 SPEC MOTOR. SHOULD HAVE 430 H.P. AT THE CRANK. THE REASON FOR THE COWL HOOD IS MY INTAKE IS A MEDIUM RISE, I NEEDED LIKE 3 MORE INCHES. RUNNING 1 3/4 SHORTY HEADERS NOW TOO.
FUNNY, AT THE TRACK ON CRAPPY RADIALS I HAD A HARD TIME FENDING OFF THE 5.0'S....
NO HOOK UP, ONLY SPIN IN 1ST, 2ND, HAD TO LET UP AND RE-LAUNCH IN TOP OF SECOND, 5.0 AT MY REAR QUARTER, JUST LEFT IT IN 3RD GEAR AND WATCHED THE STANGS ON STREET SLICKS SLIDE BY....
SO...........
I GOT M/T'S NOW, MY OTHER BUDDY SHOWED ME THAT MY PULL GEAR IS 4TH, NOT THIRD...
HE WAS RIGHT, HIT 4TH GEAR EARLY AND KEEP MY FOOT IN IT...SHE JUST SCREAMED, PRETTY FAST. THE CHIP MARK BURNED WAS PRETTY GOOD, BUT MY CAR CHUGGED ALOT.
NOW, NO CHIP WORRIES JUST DON'T REMEMBER MUCH ABOUT TUNING A CARBED CAR. I THINK IN SEPTEMBER SHE WILL HIT THE ROAD. BENNIE GET THAT DYNO UP YET?
FUNNY, AT THE TRACK ON CRAPPY RADIALS I HAD A HARD TIME FENDING OFF THE 5.0'S....
NO HOOK UP, ONLY SPIN IN 1ST, 2ND, HAD TO LET UP AND RE-LAUNCH IN TOP OF SECOND, 5.0 AT MY REAR QUARTER, JUST LEFT IT IN 3RD GEAR AND WATCHED THE STANGS ON STREET SLICKS SLIDE BY....
SO...........
I GOT M/T'S NOW, MY OTHER BUDDY SHOWED ME THAT MY PULL GEAR IS 4TH, NOT THIRD...
HE WAS RIGHT, HIT 4TH GEAR EARLY AND KEEP MY FOOT IN IT...SHE JUST SCREAMED, PRETTY FAST. THE CHIP MARK BURNED WAS PRETTY GOOD, BUT MY CAR CHUGGED ALOT.
NOW, NO CHIP WORRIES JUST DON'T REMEMBER MUCH ABOUT TUNING A CARBED CAR. I THINK IN SEPTEMBER SHE WILL HIT THE ROAD. BENNIE GET THAT DYNO UP YET?
#20
Supreme Member
iTrader: (1)
Join Date: Jul 2002
Location: sacramento, ca USA
Posts: 2,789
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc-z 5.7tpi 350,
Engine: 5.7tpi 350,
Transmission: T-56 fully built WOOHOO
Re: Cat out of the bag...
HMMN, THIS SET UP IS REALLY THE ZZ430 SPEC MOTOR. SHOULD HAVE 430 H.P. AT THE CRANK. THE REASON FOR THE COWL HOOD IS MY INTAKE IS A MEDIUM RISE, I NEEDED LIKE 3 MORE INCHES. RUNNING 1 3/4 SHORTY HEADERS NOW TOO.
FUNNY, AT THE TRACK ON CRAPPY RADIALS I HAD A HARD TIME FENDING OFF THE 5.0'S....
NO HOOK UP, ONLY SPIN IN 1ST, 2ND, HAD TO LET UP AND RE-LAUNCH IN TOP OF SECOND, 5.0 AT MY REAR QUARTER, JUST LEFT IT IN 3RD GEAR AND WATCHED THE STANGS ON STREET SLICKS SLIDE BY....
SO...........
I GOT M/T'S NOW, MY OTHER BUDDY SHOWED ME THAT MY PULL GEAR IS 4TH, NOT THIRD...
HE WAS RIGHT, HIT 4TH GEAR EARLY AND KEEP MY FOOT IN IT...SHE JUST SCREAMED, PRETTY FAST. THE CHIP MARK BURNED WAS PRETTY GOOD, BUT MY CAR CHUGGED ALOT.
NOW, NO CHIP WORRIES JUST DON'T REMEMBER MUCH ABOUT TUNING A CARBED CAR. I THINK IN SEPTEMBER SHE WILL HIT THE ROAD. BENNIE GET THAT DYNO UP YET?
FUNNY, AT THE TRACK ON CRAPPY RADIALS I HAD A HARD TIME FENDING OFF THE 5.0'S....
NO HOOK UP, ONLY SPIN IN 1ST, 2ND, HAD TO LET UP AND RE-LAUNCH IN TOP OF SECOND, 5.0 AT MY REAR QUARTER, JUST LEFT IT IN 3RD GEAR AND WATCHED THE STANGS ON STREET SLICKS SLIDE BY....
SO...........
I GOT M/T'S NOW, MY OTHER BUDDY SHOWED ME THAT MY PULL GEAR IS 4TH, NOT THIRD...
HE WAS RIGHT, HIT 4TH GEAR EARLY AND KEEP MY FOOT IN IT...SHE JUST SCREAMED, PRETTY FAST. THE CHIP MARK BURNED WAS PRETTY GOOD, BUT MY CAR CHUGGED ALOT.
NOW, NO CHIP WORRIES JUST DON'T REMEMBER MUCH ABOUT TUNING A CARBED CAR. I THINK IN SEPTEMBER SHE WILL HIT THE ROAD. BENNIE GET THAT DYNO UP YET?
well what kind of timing you gonna run, mechanical advance with vacuum or what. i would also get a wide band to help jet and put the right metereing rods in.
either way cant wait to see her again
#21
Member
Thread Starter
Join Date: Dec 2000
Location: sacramento,ca. usa
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc,2012 eco 150,roadglide
Engine: zz4
Transmission: t56
Re: Cat out of the bag...
UPDATE: 12/10/08'
IROC still is not running. However, I have made some progress.
1. stock hood now fits and still using medium rise vortec manifold and 3' air cleaner. (like a 1/4 inch room) took out a carb spacer (had trouble clearing my brake booster vacum connect) I filed a big corner off the fitting. I also had a spacer for the aircleaner to sit higher (the drop base was rubbing on my throttle return spring mount) I flipped the spring/cable mount upside down.
2. Installed the aeromotive afpr only to have no fuel pressure at the carb. I poured some gas down the carb anyway and she fired right up! is loud! I think louder then the tpi.
3. trouble shooted the no fuel pressure and found something wrong in the carb, but I don't know what. When I turn the key on, the pump energizes, sends fuel to the carb which now shoots fuel straight up and out via the power valve vent tube? I have not taken the carb off yet.
So I heard it run, but lost interest to troubleshoot the carb until spring. too cold to work on the rock right now.
IROC still is not running. However, I have made some progress.
1. stock hood now fits and still using medium rise vortec manifold and 3' air cleaner. (like a 1/4 inch room) took out a carb spacer (had trouble clearing my brake booster vacum connect) I filed a big corner off the fitting. I also had a spacer for the aircleaner to sit higher (the drop base was rubbing on my throttle return spring mount) I flipped the spring/cable mount upside down.
2. Installed the aeromotive afpr only to have no fuel pressure at the carb. I poured some gas down the carb anyway and she fired right up! is loud! I think louder then the tpi.
3. trouble shooted the no fuel pressure and found something wrong in the carb, but I don't know what. When I turn the key on, the pump energizes, sends fuel to the carb which now shoots fuel straight up and out via the power valve vent tube? I have not taken the carb off yet.
So I heard it run, but lost interest to troubleshoot the carb until spring. too cold to work on the rock right now.
#25
Member
Thread Starter
Join Date: Dec 2000
Location: sacramento,ca. usa
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc,2012 eco 150,roadglide
Engine: zz4
Transmission: t56
Re: Cat out of the bag...
i HAVE AROUND 6 LBS. AFTER THE AFPR. Stuck needle or float? Am hoping it is this simple.
Travis, funny, nope we have not met yet, but I have seen a picture of you...
What are going to do about that new hole in your hood? I would just clean up the edges and leave it there... it looks o.k. would just leave it and stay out of the rain.
Travis, funny, nope we have not met yet, but I have seen a picture of you...
What are going to do about that new hole in your hood? I would just clean up the edges and leave it there... it looks o.k. would just leave it and stay out of the rain.
#26
Senior Member
Join Date: Aug 2005
Location: California, Sacrameto
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 gta
Engine: 350 tpi
Transmission: 700r4
Re: Cat out of the bag...
Sorry to hijack but if you want your hood fixed travis i could make a custom blister over the hole for you. Just bring your car down to my shop I owe you for the tuning stuff anyway.
#27
Supreme Member
iTrader: (2)
Join Date: Jan 2005
Location: 707
Posts: 3,058
Likes: 0
Received 0 Likes
on
0 Posts
Car: '92 Z03
Engine: LSX
Transmission: M12
Re: Cat out of the bag...
I'm hoping so too but easy way to check is to pop off the fuel bowls and check for any debris / hung up floats. Try knocking on the bowls with a block of wood and see if it unsticks anything without even pulling the bowls. I'd put new needle / seat in if it hasn't been replaced as they are finicky (sp?)
Have you had the carb rebuilt or is it new? I could rebuild a Holley 4150 in my sleep, they are e-z.
Have you had the carb rebuilt or is it new? I could rebuild a Holley 4150 in my sleep, they are e-z.
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
7
10-08-2015 08:34 PM