how do i go about removing the EGR system
#2
Sponsor
iTrader: (92)
Re: how do i go about removing the EGR system
Why ?
It should just be bolted to the intake. Get a new gasket and use as a template and make a block off plate. Iirc the egr is controlled bye a vacuum line to a tvs. Plug the signal to the egr.
https://m.ebay.com/itm/Chrome-EGR-Bl...YAAOSw44BYSw04
https://m.ebay.com/itm/CHEVY-305-350...ss!90011!US!-1
You can look at RockAuto.com but I’m pretty sure yours uses a felpro 70950 gasket.
It should just be bolted to the intake. Get a new gasket and use as a template and make a block off plate. Iirc the egr is controlled bye a vacuum line to a tvs. Plug the signal to the egr.
https://m.ebay.com/itm/Chrome-EGR-Bl...YAAOSw44BYSw04
https://m.ebay.com/itm/CHEVY-305-350...ss!90011!US!-1
You can look at RockAuto.com but I’m pretty sure yours uses a felpro 70950 gasket.
Last edited by Tuned Performance; 06-18-2018 at 05:25 PM.
#3
Senior Member
Re: how do i go about removing the EGR system
Why do you want to remove the EGR system it is only active in cruise. At idle and WOT it is not operating. The tuning issues with removing it can be a pain
Thread
Thread Starter
Forum
Replies
Last Post