FueledSoul

iTrader: (18)

I decided to do my entire engine bay to make it look nice. Here is about what I started with, the guy i bought the car from swap in a TBI engine with the worst wiring job i have ever seen. i cleaned up most the wiring, swap to a carb setup added a few bolt on's and that was it. the things that bother me the most is an unclean engine bay and undercarriage of a car. i was always to embarrassed to open my hood








Degrease and power washed

This is what a leaky master cylinder does



Hand sanding really sucks

Patchs for the firewall

FueledSoul

iTrader: (18)

After welding who knows how many small holes i laid a thin coat of fibber glass down, and filled in all the factory stretch marks and over laps in the metal

I used a spray on most the metal



I changed my mind and shaved the wiring, and smoothed out the strut towers with fibber galss filler and then a thin coat of bondo





Set and ready for primmer/sealer

FueledSoul

iTrader: (18)

The color


The base coat

Clear coat



Masked off the painted bay painted the k-member

Painted the transmission tunnel

FueledSoul

iTrader: (18)

FueledSoul

iTrader: (18)

Heres a few small clips

FueledSoul

iTrader: (18)

It took me about 4 months to get to this point, spent about 2 days wet sanding and buffing out the bay, i refinished all the parts or bought new and then detailed them. I detailed everything even if it was hardly visible. if im going to make the bay look nice might as well spend the extra time and make everything look nice too! There will be more updates coming

CYARS92

Hard to tell by the few pics you posted but it's looking real nice! Love the silver. Whats the plans for the rest of the car?

mw66nova

iTrader: (13)

firewall looks good. i see that you also welded up the holes on the fenders from where the tanks went. but why did you just paint that motor and put it back in there? gonna make it look good, make it go fast too!

FueledSoul

iTrader: (18)

i dont want to get ahead of my self but suspension is next on the list after i get the car runing
----------
i haven't decided on what engine i want to put in yet i have a few laying around like a ZZ4 short block that iv been hanging onto for sometime now, i ended up refreshed this one, put in a cam and did some small things to get me by till i decided on what i want to build but it is going to be a gen1 sbc since the car is already setup for one plus all the parts i just bought for it so i basicly have been sitting up a foundation for the next

Stippy17

iTrader: (6)

Great work, I love all the attention to detail. Looks real nice so far!

rwdtech

looks very chodeworthy tony! keep up the good work!

89transam*pearl

iTrader: (1)

Nice job.....won't be so embarassing to open the hood now !

FueledSoul

iTrader: (18)

Stevo

iTrader: (45)

That looks great, don't you just love clean shaved and smooth engine bays? I did the same to mine. I can finally sleep at night knowing there are no holes!

FueledSoul

iTrader: (18)

yes its soo nice now alot of hard work paid off, hey stevo do you have a link to what yours looks like?

87_gta

Thats 1 clean engine bay, i want to do that to mine 1 day.......really badly, great work

ezysk

Great Job

FlamedROC

Wow!!!

I H8 WWD

iTrader: (5)

STRAIGHT SICK!!!. The color scheme looks great.

84zw305

man that looks great

blue91z28cam

iTrader: (4)

the work so far looks completely awesome man!..keep up the good work
keep us updated too

webeeZ28

iTrader: (2)

Shazam! That just kicks a$$. I wish I could have your talent

FueledSoul

iTrader: (18)

Thanks guys! I got the engine running and it sounds great!! all post some new pics soon! i tried to cheap out with high temp painted headers, after a few mins with the engnie running the paint started to bubble so all be swapping out for some jet-hot coated headers this time around

mesterz2889

ive got a year to get 4 more camaros and mad skills and i can be just like you. dude thats some awesome work you could have fooled me that you dont like doing body work

FueledSoul

iTrader: (18)

Tobias05

looks awesome!

i have the same problem with the brake fluid spilled all over, are you worried about rust coming back in that area?

someday when life isn't so crazy and i'm not in a different state every month i'm tear mine down too and make everything nice.

keep it up!

FueledSoul

iTrader: (18)

no not at all. i used a 2" sanding pad with 80 grit on an air power tool, then some other 2" disc from the assorted pack and went down to bare metal it took care of all of it, then just to be on the safe side i used a rust converter followed by a rust sealer....
and thanks for the complements

Duane's 91 Z/28

iTrader: (1)

Thats exactly what I want to do with mine once I get a Camaro. But mines going to be 69 Camaro Cortez Silver. I love what you're doing man, keep up the great work!!!

FueledSoul

iTrader: (18)

Thank you

Joshx3g

That's what I'm about to do to my Camaro. It's a 1992 RS.


and I thought taking out Dynamat was hard...

Sonymaster20

iTrader: (3)

lol! thats my next task, taking out the engine and cleanign the compartment.

Joshx3g

At least you don't have to remove Dynamat! lol

The Project

iTrader: (6)

Beautiful work so far.......great job.

What colour are you using?

FueledSoul

iTrader: (18)

hopefully you wont run into any huge surprises....
----------
thanks , its orange! lol

FueledSoul

iTrader: (18)

Well i finally got my headers from jet-hot after waiting a few weeks for them to arrive.
Might be going on the car tonight

1fastrock

Looks amazing man!! cant wait to see pictures with the headers on

I H8 WWD

iTrader: (5)

Damn I cant wait to get mine, lookin good yo. Im having Jet-Hot cut my tubes and weld them shut and will have their Sterling Coating as well....then I have to buy my corsa cat-back...

Take care and post when the headers are in, maybe even a video when possible....later dude man.

FueledSoul

iTrader: (18)

Im glade i got the first set uncoated. they worked great for pulling in and out and mocking up where i needed to cut to clear some of the header primaries before dropping in my new jet-hot coated headers... i had to notch the k-member and both ears on the k-member where the lower control arms bolt to. it wasn't all that bad or hard. heres some pics,
enjoy!

bigdavesiroc

those are hedman's right? i had mine coated and then had to modify the header on the driver's side. thinking of getting it re-coated, maybe along with the whole exhaust. how's that for not rusting!!!!

FueledSoul

iTrader: (18)

yea there hedmans. och! your thinking about coating the entire exhaust system??

FueledSoul

iTrader: (18)

What a pain! so after i started to bolt these down there was another part of the a-arm mounting point i had to cut out and reinforce.... im all done though bit of work to fit the long tubes how i wanted but at least i wont have any dented primaries

Ed1LE

iTrader: (39)

That looks incredible! It's the same route I'm thinking of going and a similar color (I'm really liking the sunburst orange GM uses on the new vets). Do you work in at a body shop, have access to one or did someone spray that for you. Excellent attention to detail. Also, thanks for the heads up on the notching! Looks like I'll be busy!

FueledSoul

iTrader: (18)

Thanks! I don't work at a body shop or anything like that, i did everything even sprayed the base and clear, i set up a makeshift paint booth out of PVC pipe for the skeleton and used clear plastic to cover the bay making it fully enclosed. i taped all the seams and taped the plastic to the floor, cut a peace out of the sheet to mount a fitter and a vent hole for air to go out a side window in the garage i used a high rated CFM fan and pressurized the entire box (pushing air our not sucking it in) and keep the floor damp when i was painting to get whatever dust or over spray down. anyway the cars coming along i just have some wiring to wrap up and some other odds and ends, I'm currently work on the undercarriage

Sonymaster20

iTrader: (3)

Nice Idea of a makeshift paint booth, Sounds really interesting. good job on the work also.

RevItUpZ28

iTrader: (1)

Wow, the car has come a long way! Looks great!

thirdgenfcarnut

WOW!!! BEAUTIFUL work. This is what the hobby is all about!!! I hope to be doing the same to mine one day.

rwdtech

geeze tony, could you work any slower?

FueledSoul

iTrader: (18)

Its time consuming when you want things perfect

84z350crate

nice job it's looking great

Camaroguy6984

iTrader: (2)

Looks GREAT.