3 wire Temp sensor? & other
#1
3 wire Temp sensor? & other
My 2 wire temp has yellow & tan, the 3 wire plug is bl/ppl/blk.Question is, where do the yll/tan wires go to on the 3 wire plug?
Also, does the alt (brown) wire from my c100 go on the back of the LS alt.Im guessing this (brn wire) is for the gauge.Originally went to the 2 wire alt plug.
Lastly, I don't have anything on the harness to hook up the NSS (org/blk wire) & the TCC (ppl wire).Where else can they go?
This is on a e-rod harness? Ive been doing searches to no avail.Any/all help appreciated.
Also, does the alt (brown) wire from my c100 go on the back of the LS alt.Im guessing this (brn wire) is for the gauge.Originally went to the 2 wire alt plug.
Lastly, I don't have anything on the harness to hook up the NSS (org/blk wire) & the TCC (ppl wire).Where else can they go?
This is on a e-rod harness? Ive been doing searches to no avail.Any/all help appreciated.
#2
Member
iTrader: (4)
Join Date: May 2013
Location: Indiana
Posts: 249
Likes: 0
Received 16 Likes
on
7 Posts
Car: 92 Z28
Engine: ls3
Transmission: t56
Axle/Gears: 4.11
Re: 3 wire Temp sensor? & other
A = black............coolant temp input to ecm, low reference
b = yellow...........coolant temp input to ecm, sensor signal
c = green............coolant temp input for cluster mounted temp gauge
I don't know if this will help you any because I am not sure of the tan wire, not saying it isn't right or anything. I just don't remember it, but this is what I used to wire up the 3 wire cts. The pins a,b, and c are going to be the same regardless of wire color. Hope it helps.
Jay
The following 3 users liked this post by redmaroz:
#4
Re: 3 wire Temp sensor? & other
Attachment 326199
A = black............coolant temp input to ecm, low reference
b = yellow...........coolant temp input to ecm, sensor signal
c = green............coolant temp input for cluster mounted temp gauge
I don't know if this will help you any because I am not sure of the tan wire, not saying it isn't right or anything. I just don't remember it, but this is what I used to wire up the 3 wire cts. The pins a,b, and c are going to be the same regardless of wire color. Hope it helps.
Jay
A = black............coolant temp input to ecm, low reference
b = yellow...........coolant temp input to ecm, sensor signal
c = green............coolant temp input for cluster mounted temp gauge
I don't know if this will help you any because I am not sure of the tan wire, not saying it isn't right or anything. I just don't remember it, but this is what I used to wire up the 3 wire cts. The pins a,b, and c are going to be the same regardless of wire color. Hope it helps.
Jay
#5
Re: 3 wire Temp sensor? & other
I just installed a new temperature control sensor in my 96 firebird v6. The color coding didn't exactly match. The new red matched up to black (B), the new black matched up to yellow (A) and the new white matched up to green (C). which concurs with the diagram given above.
#6
Supreme Member
Join Date: Jul 2006
Location: 212 is up in this Bit@#
Posts: 2,763
Received 739 Likes
on
565 Posts
Car: Resto-Mod 1987 IROC-Z Clone
Engine: Alky fed L92 Vortec Twin-Turbo 6.8L
Transmission: My own built/ design 4L80M
Axle/Gears: Custom 12 bolt (4.10:1)
Re: 3 wire Temp sensor? & other
Do NOT ever assume that Wiring colors are the same between two different Cars (especially if they do not even share the same Engine/ EFI System).
That is a really good way to **** things up.
That is a really good way to **** things up.
Thread
Thread Starter
Forum
Replies
Last Post