LSX Long tubes with Tubular K member
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Mar 2012
Location: Georgia
Posts: 574
Likes: 0
Received 6 Likes
on
4 Posts
Car: 91' Z28. 70' Dune Buggy
Engine: LSX Cam/Full Bolt ons
Transmission: T56
Axle/Gears: 4.10
LSX Long tubes with Tubular K member
I'm building a lsx camaro and am looking into tubular K members. Some companies say that you gain extra header clearance with their K members. If I get a tubular K member, will this allow me to run 4th gen long tubes? Possibly GTO longtubes?
4th gen long tubes go from $200-$500. I don't want to dish out $900 simply because hawks wants almost a 200% markup due to demand.
Also will Hawks longtubes work with Tubular K-members?
4th gen long tubes go from $200-$500. I don't want to dish out $900 simply because hawks wants almost a 200% markup due to demand.
Also will Hawks longtubes work with Tubular K-members?
#2
Supreme Member
iTrader: (4)
Join Date: Apr 2006
Location: Windsor Ontario
Posts: 1,128
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Z28
Engine: 2005 5.3L, LS6 Cam
Transmission: T56
Axle/Gears: DTS 9" 3.50 TrueTrac
Re: LSX Long tubes with Tubular K member
Why not buy the ebay ones?
http://www.racinginnovationandsupply...der_p_189.html
Also hedman sells headers now also. ranging from 350-550 depending on mid length or long tube.
Jay
http://www.racinginnovationandsupply...der_p_189.html
Also hedman sells headers now also. ranging from 350-550 depending on mid length or long tube.
Jay
#3
Senior Member
Thread Starter
iTrader: (1)
Join Date: Mar 2012
Location: Georgia
Posts: 574
Likes: 0
Received 6 Likes
on
4 Posts
Car: 91' Z28. 70' Dune Buggy
Engine: LSX Cam/Full Bolt ons
Transmission: T56
Axle/Gears: 4.10
Re: LSX Long tubes with Tubular K member
Holy crap. Thank you. For whatever reason I thought Hawks was the only one who sold swap headers for our cars.
Any reviews on the headers in the link above. They look nice.
Any reviews on the headers in the link above. They look nice.
#4
Moderator
iTrader: (3)
Re: LSX Long tubes with Tubular K member
I trust Stainless Works, and I trust Hedman. While Hedman does offer several different options that Hawks/SW doesn't, the cost is really about the same, once you add coating, AND they're not stainless. The best deal I could find was their Mid Length uncoated. Cost is about $350...BUT....they suggest Hedman's LS swap kit, which includes their trans mount, It's pricey at $550, but comes with all the swap brackets etc. etc. Hawks also recommends their x member, but you can buy it separately, without a "kit" ....not trying to nickel and dime, but when you get down to apples to apples, they're very similar.
http://www.summitracing.com/parts/hed-45720
Now Racing Innovations sounds like a good deal IF...and that's an ENORMOUS "if" they're a quality product. There are SO many knock off headers out there and they're terrible. I have no knowledge of these, but they SURE are cheap. I'm a little skeptical, but I'm happy to have someone come in here and tell me otherwise.
http://www.summitracing.com/parts/hed-45720
Now Racing Innovations sounds like a good deal IF...and that's an ENORMOUS "if" they're a quality product. There are SO many knock off headers out there and they're terrible. I have no knowledge of these, but they SURE are cheap. I'm a little skeptical, but I'm happy to have someone come in here and tell me otherwise.
#6
Senior Member
Re: LSX Long tubes with Tubular K member
I love my BRP Hedman Husler mids, I was the first on the board to try them. From BRP the coated mids are very reasonable. I've got over 3k miles on them and they look great.
#7
Supreme Member
iTrader: (4)
Join Date: Apr 2006
Location: Windsor Ontario
Posts: 1,128
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Z28
Engine: 2005 5.3L, LS6 Cam
Transmission: T56
Axle/Gears: DTS 9" 3.50 TrueTrac
Re: LSX Long tubes with Tubular K member
^^^ after I hit reply I remembered about BRP. My buddies use them for their Monte's They have some quality pieces.
Now the cheap ones I posted are only 1 5/8 so really I would only use them on a budget motor. I thought I saw some cheap ones that were 1 3/4 somewhere though. Also im pretty sure there is a thread about them on here showing fitment IIRC.
Jay
Now the cheap ones I posted are only 1 5/8 so really I would only use them on a budget motor. I thought I saw some cheap ones that were 1 3/4 somewhere though. Also im pretty sure there is a thread about them on here showing fitment IIRC.
Jay
Trending Topics
#9
Senior Member
Thread Starter
iTrader: (1)
Join Date: Mar 2012
Location: Georgia
Posts: 574
Likes: 0
Received 6 Likes
on
4 Posts
Car: 91' Z28. 70' Dune Buggy
Engine: LSX Cam/Full Bolt ons
Transmission: T56
Axle/Gears: 4.10
Re: LSX Long tubes with Tubular K member
Im going to buy a set of longtubes this week. Anyone have reviews on these. I'm really liking the price. But will certainly dish out more, if they aren't a good piece.
Thread
Thread Starter
Forum
Replies
Last Post
morrow
Suspension and Chassis
78
01-13-2024 12:29 PM
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM