Lt1 radiator heater core hoses
#1
Senior Member
Thread Starter
Join Date: Dec 2007
Location: Missouri
Posts: 614
Likes: 0
Received 3 Likes
on
2 Posts
Car: Camaro RS
Engine: obd2 350 lt1
Transmission: T56
Axle/Gears: 3.23
Lt1 radiator heater core hoses
Doin the lt1 swap here is the drawing i stole off of shbox sorry shoebox
Do i route my lines like this?
Wont there be constant heat running through?
Can i put my heater valve in there somehow?
Thanks
Do i route my lines like this?
Wont there be constant heat running through?
Can i put my heater valve in there somehow?
Thanks
#2
Re: Lt1 radiator heater core hoses
I had the auto store cut me like 6 ft of 5/8" and 3/4" hose. Ran them directly from the water pump to the heater core, having the hoses run on top of the engine.
If I stay LTx-based, I'm going to run thirdgen metal heater lines somehow.
If you want to have a heater valve, I would recommend one with only 2 connections, not 3, the 2 style one is easier to put in. Then just run the vacuum line to it that was connected to your old heater valve.
If I stay LTx-based, I'm going to run thirdgen metal heater lines somehow.
If you want to have a heater valve, I would recommend one with only 2 connections, not 3, the 2 style one is easier to put in. Then just run the vacuum line to it that was connected to your old heater valve.
Thread
Thread Starter
Forum
Replies
Last Post
codeysabatini
Engine/Drivetrain/Suspension Parts for Sale
5
11-10-2015 04:07 PM