When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Re: Rear hatch struts that won't launch the glass to outer space
Originally Posted by stoutblock
Opening up this thread again with a question. My rear window defrost is wired through my strut. Do these replacement struts have this wiring attachment provision?
Re: Rear hatch struts that won't launch the glass to outer space
Originally Posted by stoutblock
Opening up this thread again with a question. My rear window defrost is wired through my strut. Do these replacement struts have this wiring attachment provision?
Be careful with the cheap ones, I got a set a while ago and didn't think anything of it. They had the tabs so they must work, right... Ya no, I hit the button and it blew my 50A ignition prefuse. Turns out they're not properly insulated where it mounts to the body so it's a dead short. I ponied up the $90 for a pair of AC Delco ones with the contacts welded on to the strut like they should be. Haven't installed them yet but they look to be correct.
Re: Rear hatch struts that won't launch the glass to outer space
Originally Posted by Abubaca
Just chiming in here. As with others, replaced my 4900 with 4967. Standard 88 Iroc hatch/spoiler. Used to come up on it's own, and WAY too fast. Now it just sits there on the latch, hovering. Juuuust a little pressure and it'll come up, but MUCH easier to pull down too.
$15 a piece from Rock Auto.
Do you know if these 4967's would be a good choice for an 86T/A with the rubber aero spoiler?..I wouldn't mind having to give it a push..
Re: Rear hatch struts that won't launch the glass to outer space
Originally Posted by exiled350
Be careful with the cheap ones, I got a set a while ago and didn't think anything of it. They had the tabs so they must work, right... Ya no, I hit the button and it blew my 50A ignition prefuse. Turns out they're not properly insulated where it mounts to the body so it's a dead short. I ponied up the $90 for a pair of AC Delco ones with the contacts welded on to the strut like they should be. Haven't installed them yet but they look to be correct.
Where did you buy them and do you have a part number?
Re: Rear hatch struts that won't launch the glass to outer space
I installed the Delco struts today and the work correctly. The closing effort is not bad and it opens slow enough that it doesn't bounce or anything. The defogger grid works properly now too. You can see the welded tab on the bottom and riveted at the top. The maxpow one is what I originally got that are totally made wrong for this application and shorted the defogger feed.
Re: Rear hatch struts that won't launch the glass to outer space
^^^ good to hear ^^^
I bought a pair of the strong arm 4967 but decided the AC delco looked closer to stock with how the defogger wires attached. Now I have both on the garage shelf but will be installing the Delco ones.
02-06-2024, 05:31 AM
