libolt

I'm looking at possibly upgrading the driver side seat in my 1991 Trans Am from the Manual Track to a power track. To do the conversion, do I just need the powr track like this:

http://cgi.ebay.com/ebaymotors/ws/eB...ayphotohosting

Also the appropriate wiring to the fuse block, or is it more involved than that?

Thanks,

Mike

Berlinetta00

Thats got most everything you need if you are going to keep the same seat. It should be wired directly to a hot power source as the seat should still be able to move with the vehicle off. Im not sure how tall you are, but I am 6' and it wouldn't hurt the power seat at all if it would move back another inch or so. Just something to consider.

Toehead

just make sure it is properly fused and you should be good to go.