Testa Rossa

iTrader: (1)

Parting out the entire interior of my 83 Camaro.

Grey cloth, carpet, and panels.

Driverside seat is gone.
Still have passenger side, all carpet, most grey interior panels are still available, door panels, etc.

I have it all
(less dash, driver seat, steering column, steering wheel & radio)

Will ship on your dime.

Shoot me an EMAIL for your questions & requests.
Haven't been able to check the site very often.
Let me know what you need.

http://i8.photobucket.com/albums/a45...0Camaro%20Z28/

falcone1969

How much for the rear louvres shipped to 44512? Would they fit an '84 TA?

Testa Rossa

iTrader: (1)

Actually, the rear louvers were not attached when I had it towed home. They flew off and landed in the middle of the street. Pretty busted up...
Sill have all the pieces, and it "MIGHT" go back together, but it wouldn't be pretty...

Benc1

iTrader: (10)

Still got the steering wheel? How much?

Testa Rossa

iTrader: (1)

Sorry. It's already gone.

dennisschreuer

iTrader: (3)

Clutch pedal set up?
Dennis

Testa Rossa

iTrader: (1)

PM'd

silverlsx

Door sill plates?

k15 racing

Do u still have the interior ttop molding? How much shipped to 12953? Abs plastic or cardboard? Thanks kevin

Testa Rossa

iTrader: (1)

You talking about these plastic pieces?
Yup. Still have them. Give me a Zip for shipping quote...
I'm really reasonable on prices otherwise..

There is a picture of a carriage in the middle that says "Body by Fisher"

Testa Rossa

iTrader: (1)

Could you clarify?
Not sure which t-top moulding you are referring to...

The little plastic/carboard pieces the "trim" out the headliner?
Must've been the cheap "cardboard" junk (see left side of pic), 'cause it looks like I threw them out with the headliner.
Can't find them anywhere.

If you're talking about something else, I might still have it.

Tomaz

Still got that interior cargo lid?

83C_CamAroZ28

iTrader: (12)

Is the dash cluster for sale also.

cmmcginnis

How much or the rear cargo cover panel shown in the last picture of the first post?

Testa Rossa

iTrader: (1)

Yup.
Send me your offer, and an address so I can calculate shipping.

Testa Rossa

iTrader: (1)

The "lid" that Tomaz referred to, or the plastic panel behind it (the one that the lock is in)?

Tomaz

I was interested in both if you ship to Europe.

Testa Rossa

iTrader: (1)

I'm willing to consider it if the price is right.
Never done it before, but I know it can be a pain with all the customs forms and such...

Shipping will be VERY expensive to go international.
That rear plastic panel is pretty big. (Bigger than the carpeted lid)

Shoot me an offer ($US),
and give me your address and I'll try to get a shipping quote for you.

cHEVy hEAVy

iTrader: (1)

How much for the dome light?

Testa Rossa

iTrader: (1)

Whatever your willing to pay for it!

Pac-Attack

Do you still have both T-tops? What kind of condition are they in? How about the interior plastic portions (where the handle is)?

Testa Rossa

iTrader: (1)

Yup.
Pretty good condition overall.
Plastic trim is decent, but I just noticed one of the screws have broken through the hole on the driverside. Just one as far as I can tell.

Passenger side seems to be fine.

Pac-Attack

Thanks for the quick reply. Are they the mirrored type on the insides? What are you asking for them? Any chance at some pictures?

Testa Rossa

iTrader: (1)

I think hey are that slightly green mirror-ish looking tint.
Some of the other windors are tinted, so I'm not sure if that's all original or added on. I'll have to take a closer look.

I have some pics on http://i8.photobucket.com/albums/a45...0Camaro%20Z28/

I'll see if I can get some better ones.

I think the going price for these is about $150.
Plus whatever shipping is.
I'll include the t-top storage bag at no charge if you want it (might make it easier to pad and ship them anyhow).

EvelBist

iTrader: (1)

plastic or cardboard rear speaker covers? If plastic, total for both w/ ship to 87059 pls. thanks!

Testa Rossa

iTrader: (1)

They are the "cardboard" ones covered with fabric.

SolarGoldRaptor

What condition are the front seatbelts in ? They look dirty but are they working fine ? The driver side seem stuck, is it ?
I'd be also interested in the plastic cover for the driver mirror "joystick".
And also the electric seat track but that might be way too expensive to ship over here...

Testa Rossa

iTrader: (1)

Driver seatbelt was stuck in the pic, BUT...
As I was pulling them out, I noticed the spring cover for the driver belt had come off. I found it laying on the floor. Wound it up and reattached it and the driver-side now works fine! So all seatbelts are in good working condition.

The plastic around the front latches is deteriorating, but the belts themselves are good. Rear seatbelts are in really good conditions as well. Only the Rear passenger side latch is gone already. Still have the 3 other latches and all four belts.

Electric seat track already gone. Sold the whole driver seat awhile back.

Testa Rossa

iTrader: (1)

Ok... I'm dumb... There IS a driverside "joystick".

Fine condition, just a little dirty.
Make me an offer.

SolarGoldRaptor

Sorry I forgot about your thread. Seems like I'm never going to find a decent set of light sand gray seat belts so I'm quite interested.
I've just seen your gallery btw, are those new parts for sale too ? I'd be interested in this sensor with the green top, never remember the name of this thing. I'd take the PCV valve as well. :


The parking brake handle seem to be in pretty good shape too, is it ?

Testa Rossa

iTrader: (1)

Got the belts, and they're already out and ready to ship. Just make me an offer.

I may sell some of the new parts, but I'm still building this engine for another project. (383 in my FSJ). Will keep anything I still need to finish the engine.

Can't see your pic at the moment (at work), but I'll take a look and see if it's something I need or can stand to part with.

Out of town 'til this Saturday. Will check it out when I get back.

xx138xx

How much for the upper plastic rails on the door panels?

SolarGoldRaptor

Not sure about a price, they don't look super clean or reliable but it's fine for me, so what about $50 for the set ?

Damn, I'd love to get those interior plastics, they look great and not dry rot, but shipping these is not even an option.

Lug

Hello
How much for the seatbelts..........
Thanks

SolarGoldRaptor

Up !

Testa Rossa

iTrader: (1)

All retractors and receivers work fine...
Passenger Rear receiver is not included. I already sold it separately.
And yes...they're pretty dirty... Car has been sitting since the 90's...

Yeah, I'll take $50 as long as shipping doesn't cost me a fortune.
Send me a PM with your Addy and I'll get a quote.

Testa Rossa

iTrader: (1)

Oh... and that thing with the green top... It's the EGR TVS.
It's a "temperature vacuum switch/valve" that routes Exhaust gas from the EGR to the CARB below a certain temperature. When the engine reaches operating temperature, it cuts the flow from EGR.

Same valve can also be use with the EFE TVS system (Early fuel evaporation thermal vacuum switch)

87hdziroc

hey bro you have the hood louvers?

Testa Rossa

iTrader: (1)

Nope. Sorry!
Didn't come with the car when I bought it.

Testa Rossa

iTrader: (1)

Everything is pulled out of the car, and can be ready to ship pretty quickly.
Let me know what you want/need.

83Z28/L69

The factory shifter ball for sale?

Duane's 91 Z/28

iTrader: (1)

Do you still have the lower shift boot? If so how much shipped to 96097?

Testa Rossa

iTrader: (1)

Sorry. Both gone

Sasquacth

Rear cargo lid with key lock still available?

FormerL69

iTrader: (2)

Front seat seatbelt guides (both sides)?

Testa Rossa

iTrader: (1)

Still have most of this stuff.
Car is gone, But I pulled the entire interior and its sitting in a bin behind my garage (covered).
If you still want/need anything, let me know.

FormerL69

iTrader: (2)

How much for the rear interior cargo panel (the one with the light and switch on it)? Could you PM me some more pics of that part? Would like to get a better sense if its overall condition (nicks, scratches, gouges etc.)

Thx!

FormerL69

iTrader: (2)

Also, would you be willing to part out the t-tops? I need don't need the glass, but I do need the interior trim plastic from them. If you won't part them out, are they latch or pin style?

Testa Rossa

iTrader: (1)

Actually the interior plastic isn't the best shape.
Driver-side has broken screw holes at both ends (only them middle holds it on)
The passenger side has 1 broken screw hole, and the other end has a quarter-size piece broken off.

Testa Rossa

iTrader: (1)

PM'd