[KS] I have a 1991 Formula parting out
10-17-2009, 07:19 PM
#1
I have a 1991 Formula parting out
Everything complete with car. So i am parting it out piece by piece. Sorry for all that want the engine and or the transmission. Keeping those for spare parts for my 1986 camaro. The door handles interior and exterior are gone. As i took those out as well. Its a t top the t tops are for sale they are not the orginal though. Some aftermarket and i would say they are in mediocre condition. Has all the clusters and all works. Steering column is out as well since it went in my camaro. I have the 4 tires and rims might sell with a reasonable price. It has working ac all bone stock that will sell to. Anything down to the block willing to sell. Minus a few things the starter the exhaust manifolds. this is a 305 TPI. Willing to sell the TPI. Will take pictures of any parts that they want because the pictures will say a thousand words than description so all just bring on the posts and I will reply in a timely manner. Now mind you all I work and will check the posts. Getting parts out ect.. Give me time and what well do on that is I will pull it out show you pictures of it removed if you want it you buy it NO REFUNDS. The engine is working order so the TPI setup would be great for a swap from carb or from a tbi setup. Any comments or questions will send pm of my phone number and ect.. Promptly. I have some experience into the shipping part what you will see as is. They will be wrapped that are breakables and put fragile on the box to be sent. Thanks all for the review of this.
BTW body parts panels ect.. will sell but will need to find out quotes ect.. for them to ship as they will probably be a bit expensive to send UPS wise. On a side note had a transmission sent to me a while back and costed me to my house 200 dollars shipping. So anything under that weight. If you are local or in Kansas willing to meet halfway to swap cash for parts.
For looking at the post.
BTW body parts panels ect.. will sell but will need to find out quotes ect.. for them to ship as they will probably be a bit expensive to send UPS wise. On a side note had a transmission sent to me a while back and costed me to my house 200 dollars shipping. So anything under that weight. If you are local or in Kansas willing to meet halfway to swap cash for parts.
For looking at the post. 
10-18-2009, 11:35 AM
#4
Junior Member
iTrader: (1)
Join Date: Oct 2007
Location: Saskatchewean Canada
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 White GTA
Engine: 5.0L
Transmission: Auto
Re: I have a 1991 Formula parting out
Good Morning
The first thing one my list is the air filter can and plastic ducting that goes to the TPI body. My was replaced with an after market one and I would like to change it back. So I need all the parts that go with it.
Skip
Please send pic to
erenscott@sasktel.net
The first thing one my list is the air filter can and plastic ducting that goes to the TPI body. My was replaced with an after market one and I would like to change it back. So I need all the parts that go with it.
Skip
Please send pic to
erenscott@sasktel.net
10-18-2009, 01:11 PM
#5
Re: I have a 1991 Formula parting out
Hi;
I'm looking for the ALT./P.S. Bracket from this car if it is an Aluminum Bracket from a 1991 T.P.I. Single Serpentine Belt System.
Please include the Price you want in your first response.
Shipping by USPS is $10.35 anywhere in the USA.
Let me know as soon as possible.
Thank you.
Sincerely yours,
Robert
I'm looking for the ALT./P.S. Bracket from this car if it is an Aluminum Bracket from a 1991 T.P.I. Single Serpentine Belt System.
Please include the Price you want in your first response.
Shipping by USPS is $10.35 anywhere in the USA.
Let me know as soon as possible.
Thank you.
Sincerely yours,
Robert
10-18-2009, 08:24 PM
#6
Re: I have a 1991 Formula parting out
http://s589.photobucket.com/albums/s...enritetreault/ here is a link. of pictures interior and exterior.
10-18-2009, 08:25 PM
#7
Re: I have a 1991 Formula parting out
Hi;
I'm looking for the ALT./P.S. Bracket from this car if it is an Aluminum Bracket from a 1991 T.P.I. Single Serpentine Belt System.
Please include the Price you want in your first response.
Shipping by USPS is $10.35 anywhere in the USA.
Let me know as soon as possible.
Thank you.
Sincerely yours,
Robert
I'm looking for the ALT./P.S. Bracket from this car if it is an Aluminum Bracket from a 1991 T.P.I. Single Serpentine Belt System.
Please include the Price you want in your first response.
Shipping by USPS is $10.35 anywhere in the USA.
Let me know as soon as possible.
Thank you.
Sincerely yours,
Robert
Trending Topics
10-18-2009, 08:29 PM
#8
Re: I have a 1991 Formula parting out
Good Morning
The first thing one my list is the air filter can and plastic ducting that goes to the TPI body. My was replaced with an after market one and I would like to change it back. So I need all the parts that go with it.
Skip
Please send pic to
erenscott@sasktel.net
The first thing one my list is the air filter can and plastic ducting that goes to the TPI body. My was replaced with an after market one and I would like to change it back. So I need all the parts that go with it.
Skip
Please send pic to
erenscott@sasktel.net
10-18-2009, 09:19 PM
#9
Junior Member
iTrader: (1)
Join Date: Oct 2007
Location: Saskatchewean Canada
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 White GTA
Engine: 5.0L
Transmission: Auto
Re: I have a 1991 Formula parting out
Thanks a full picture of under the hood will show me if the parts I need are there.
10-21-2009, 06:19 PM
#13
Re: I have a 1991 Formula parting out
Bump. the serpentine system on the car is now Sold. And also i might have the front and rear bumper with the head light and motors sold. There is alot of good parts on this car still that needs to be sold before I junk it. Like driveshaft, the torque arm "i think thats what is it call going from transmission to rearend" Front driverside and passenger side panels are in good condition. I also decided I will be selling MOTOR! TPI. 100 bucks LOCAL ONLY! yes it is a 305 with vortec heads on it. 119k on the motor Ran great. I would of driven this car if i had the title but its not a parts car. So if you have the ambition and time to pull it out its yours 100 bucks. You wont' need to bother with the transmission it will be already out of the vehicle so just the engine mounts and wiring. WILLING TO SELL THE ECM AS WELL 50 dollars shipped.
10-22-2009, 11:02 PM
#14
Junior Member
Join Date: Apr 2008
Location: Eastpointe- Crappy Michigan
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Car: 05 Corvette Z06, 86 T/A Big Block
Engine: 468, 427, I6
Transmission: TH400, 6-speed, TF999
Axle/Gears: 3.42, 5.38
Re: I have a 1991 Formula parting out
how bout the radio pod and radio trim plate shipped to 48021
10-22-2009, 11:32 PM
#15
Re: I have a 1991 Formula parting out
radio pod???? once you give me an idea what that is never heard that term pod before. But both willing to sell 25 shipping included. I will make sure also if it has cracks or anything I will give you some pictures of this as well.
10-23-2009, 05:56 PM
#16
Junior Member
Join Date: Apr 2008
Location: Eastpointe- Crappy Michigan
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Car: 05 Corvette Z06, 86 T/A Big Block
Engine: 468, 427, I6
Transmission: TH400, 6-speed, TF999
Axle/Gears: 3.42, 5.38
Re: I have a 1991 Formula parting out
Its the dash area where the radio bolts in, it unbolts from the upper dash.... I will take it and the trim.... let me know where to pay
10-25-2009, 12:37 AM
#18
Re: I have a 1991 Formula parting out
Everything must go. I will be holding on the car until its down to bones or nothing else is salvageable. I have UPS ACCOUNT. So nothing to big or to small to ship. One thing just give me time to ship as I do work. Oct 30 to the November 6th i have vacation. So be prime for all you buyers out there to start asking what you need and so you can get your shipment promptly.
10-25-2009, 11:39 AM
#19
Re: I have a 1991 Formula parting out
Hello,
I am interested in the ALUMINUM Alt/P.S. Bracket from the 1991. As you already know this will not fit with your 1986 set-up as 1985-87 were a "V" belt setup and NOT a serpentine system as the 1988-92 system is and the pulley, water pump, etc. is totally different.
Please let me know one way or the other. You can also send me your phone # and I will call you.
Thank you.
Sincerely yours.
Robert
I am interested in the ALUMINUM Alt/P.S. Bracket from the 1991. As you already know this will not fit with your 1986 set-up as 1985-87 were a "V" belt setup and NOT a serpentine system as the 1988-92 system is and the pulley, water pump, etc. is totally different.
Please let me know one way or the other. You can also send me your phone # and I will call you.
Thank you.
Sincerely yours.
Robert
10-25-2009, 12:07 PM
#20
Re: I have a 1991 Formula parting out
Hello,
I am interested in the ALUMINUM Alt/P.S. Bracket from the 1991. As you already know this will not fit with your 1986 set-up as 1985-87 were a "V" belt setup and NOT a serpentine system as the 1988-92 system is and the pulley, water pump, etc. is totally different.
Please let me know one way or the other. You can also send me your phone # and I will call you.
Thank you.
Sincerely yours.
Robert
I am interested in the ALUMINUM Alt/P.S. Bracket from the 1991. As you already know this will not fit with your 1986 set-up as 1985-87 were a "V" belt setup and NOT a serpentine system as the 1988-92 system is and the pulley, water pump, etc. is totally different.
Please let me know one way or the other. You can also send me your phone # and I will call you.
Thank you.
Sincerely yours.
Robert
Its SOLD and trying to remove the darn thing. And having problems I need help asap as it is suppose to be shipped out tommorrow. The whole serpentine system on the engine is sold.
10-25-2009, 12:11 PM
#21
Junior Member
iTrader: (1)
Join Date: Oct 2007
Location: Saskatchewean Canada
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 White GTA
Engine: 5.0L
Transmission: Auto
Re: I have a 1991 Formula parting out
Good morning
Thats it. I need the plastic tube, the rubber that fits on the TPI, the air can and the clamps. This is my email you can get me on with the price and you addrress.
erenscott@sasktel.net
I could use the cup holder on the passenger side if you still have it.
Whats you phone number I will call you and get the details for shipping.
erenscott@sasktel.net
Thats it. I need the plastic tube, the rubber that fits on the TPI, the air can and the clamps. This is my email you can get me on with the price and you addrress.
erenscott@sasktel.net
I could use the cup holder on the passenger side if you still have it.
Whats you phone number I will call you and get the details for shipping.
erenscott@sasktel.net
Last edited by 1-Skip; 10-25-2009 at 12:56 PM.
10-25-2009, 12:15 PM
#22
Re: I have a 1991 Formula parting out
I am sorry for the delay in my response. I was out of town.
If that serpentine deal falls through I am still interested in that Alt/P.S. Bracket and the bolts.
If I might be so bold as to ask, what was the amount that you sold the whole serpentine set-up for?
Thank you.
Sincerely yours,
Robert
If that serpentine deal falls through I am still interested in that Alt/P.S. Bracket and the bolts.
If I might be so bold as to ask, what was the amount that you sold the whole serpentine set-up for?
Thank you.
Sincerely yours,
Robert
10-27-2009, 10:22 AM
#26
Junior Member
Join Date: Jan 2009
Location: Hockessin, De
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2005 GTO
Engine: LS2
Transmission: T56
Axle/Gears: 3.73 LSD
Re: I have a 1991 Formula parting out
How is the carpeting? Is it black?
If so, I only need the passenger side to look decent. Don't care how the driver's side looks.
If so, I only need the passenger side to look decent. Don't care how the driver's side looks.
10-30-2009, 05:23 PM
#28
Re: I have a 1991 Formula parting out
Okay the TPI setup harness and ecm has been sold. A/c pump sold. Sway bar sold. rear struts for hatch sold, Front struts for hood sold. Dash sold. Still many more parts that are needed to be sold as well.
10-30-2009, 06:31 PM
#29
Junior Member
Join Date: Jan 2009
Location: Hockessin, De
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2005 GTO
Engine: LS2
Transmission: T56
Axle/Gears: 3.73 LSD
Re: I have a 1991 Formula parting out
How about the automatic brake pedal cover? Willing to sell that?
10-30-2009, 09:41 PM
#31
Junior Member
iTrader: (1)
Join Date: Aug 2009
Location: ND
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Firebird Formula 350
Engine: 1974 350
Transmission: '84 Trans Am T5
Axle/Gears: Borg warner 3.27
Re: I have a 1991 Formula parting out
Is it a 5 speed car?
Thanks,
Ryan
Thanks,
Ryan
10-30-2009, 09:53 PM
#33
Junior Member
iTrader: (1)
Join Date: Aug 2009
Location: ND
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Firebird Formula 350
Engine: 1974 350
Transmission: '84 Trans Am T5
Axle/Gears: Borg warner 3.27
Re: I have a 1991 Formula parting out
Ok,
But I need the 5 speed center console shift plate for the 85-92 Firebirds. Since it wont fit in your 86 Camaro, How much for it shipped to 58258?
Thanks,
Ryan
But I need the 5 speed center console shift plate for the 85-92 Firebirds. Since it wont fit in your 86 Camaro, How much for it shipped to 58258?
Thanks,
Ryan
10-30-2009, 09:58 PM
#34
Re: I have a 1991 Formula parting out
Sorry. I swapped it out a week for a camaro plate. And got a good condition shifter plate for my camaro for the swap. Sorry so I don't have that any more.
I would talk to Drew and see how much he is willing to sell it. He might sell it idk if he really needed it or not.
I would talk to Drew and see how much he is willing to sell it. He might sell it idk if he really needed it or not.
10-30-2009, 10:11 PM
#37
Re: I have a 1991 Formula parting out
Alright. Good luck on that. On that Note I still have Good condition panels in the interior for the cluster gauge the trim panels that are on a standby for possible to be sold. But if not they are up for dips the console itself isn't in bad shape. Willing to sell all of this guys come on up and start taking . And don't worry not going to be junking this car until its bone yard nothing on it. T tops are in okay shape. So whatever i didnt' post ask and I will see if i still have or sold it. As alot of parts was taken off and just haven't figured it all in my head yet. IF LOCAL the rear hatch is in GREAT shape and the pull down motor DOES Work mind you only 91 to 92 as the other years are different and wont' work. Some thigns off the top of my head to think of.
. And don't worry not going to be junking this car until its bone yard nothing on it. T tops are in okay shape. So whatever i didnt' post ask and I will see if i still have or sold it. As alot of parts was taken off and just haven't figured it all in my head yet. IF LOCAL the rear hatch is in GREAT shape and the pull down motor DOES Work mind you only 91 to 92 as the other years are different and wont' work. Some thigns off the top of my head to think of.
11-02-2009, 02:16 PM
#38
Re: I have a 1991 Formula parting out
UPDATE: The 305 HO engine in the car is sold. The 700r4 that was in my camaro is sold as well. Still good parts to sell. Drive shaft, the brake pedal for an automatic that came out of my 86 camaro selling cheap. I have in perfect condition transmission lines that can also be sold IF they are not corroded on the Radiator. Since I am changing out the radiator also it was corroded around the lower radiator hose. Didn't know if it hurt the lines or not but will give more details once i pull that out. The calipers on the firebird are for sale. I have a nice condition center console the lid in good condition no tears. Okay for all that wanted to know about the radio pod that seems to been hacked and where to bolt up the frame for the radio the tabs are broken so up to you i think that won't sell. Just tell me what you need ask drew not selling to much for them. Some parts will be little pricy because of shipping. If you ask the guy that got the serpentine system sold for 75 and shipped was 33 dollars so he got that part real cheap the shipping was the expensive thing.
11-03-2009, 03:11 AM
#39
Re: I have a 1991 Formula parting out
UPDATE FOR EVERYONE. I WILL NOT SHIP INTERNATIONAL. SORRY TO MUCH INVOLVED IN IT. I WAS CONSIDERING JUST CANADA WELL figuring i would be able to ship fine. Oh no there international fees, ect.. long list of crud. Sorry to much work involved in getting just 6lbs shipped and costing like 100 bucks :-o. Cheapest is 27 bucks and still couldn't get it to where i could ship it. BLEH. so fyi No international shipping just ground shipping in the 48 states.
11-04-2009, 10:49 AM
#40
Member
iTrader: (1)
Join Date: Oct 2001
Location: Marshallville, Ohio, USA
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Car: 98 Camaro/85 Camaro
Engine: 3.8L/ 355 CI
Transmission: Auto/ TH350
Axle/Gears: 3.23 Posi
Re: I have a 1991 Formula parting out
How much shipped (44645) for the auto brake pedal assembly?
11-05-2009, 06:15 AM
#42
Member
iTrader: (1)
Join Date: Oct 2001
Location: Marshallville, Ohio, USA
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Car: 98 Camaro/85 Camaro
Engine: 3.8L/ 355 CI
Transmission: Auto/ TH350
Axle/Gears: 3.23 Posi
Re: I have a 1991 Formula parting out
Rubber boot? Do you mean the rubber that slides over the foot part of the pedal?
11-05-2009, 03:32 PM
#44
Supreme Member
iTrader: (34)
Join Date: Jul 2002
Location: Stamford, New York
Posts: 1,983
Likes: 0
Received 6 Likes
on
3 Posts
Car: 80 SE/TTA;88 T/A GTA;86 T/A
Engine: 4.9L Turbo; LT1; empty
Transmission: TH350; T56; empty
Axle/Gears: 3:23 disk; 4:10 disk ; 3.42 disk
Re: I have a 1991 Formula parting out
You don't have the TPI rubber tubing into the air box anymore do you?
11-18-2009, 11:01 PM
#46
11-19-2009, 10:34 AM
#47
Junior Member
Join Date: Oct 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: I have a 1991 Formula parting out
Still have the power window and mirror switches from the center console? (I'm specifically looking for the bezels surrounding the switches as mine are broken.)
11-28-2009, 11:18 AM
#49
Junior Member
iTrader: (5)
Join Date: Feb 2007
Location: Yukon, OK 73099
Posts: 72
Likes: 0
Received 2 Likes
on
1 Post
Car: 88MCSS/92Firebird
Engine: 421/355
Transmission: TH-350/4L60
Axle/Gears: 4.11/2.73
Re: I have a 1991 Formula parting out
Does it have the driver side cupholder on the door? If so pics and a price please, shipping shouldn't be too bad as I am a state away! Also what speedo is in the car and pics and price on that as well. Also what condition are the female seat belt pieces?
Thanks
Bear
Thanks
Bear
Last edited by bear88ss; 11-28-2009 at 11:25 AM.
