Engine identification help
08-29-2018, 01:35 AM
#1
Junior Member
Thread Starter
Join Date: Aug 2018
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Engine identification help
hello everyone!
I came across this forum and had to sign up after reading a few threads.
I had a 350 book but I can’t find it since I’ve moved. It has all the answers im
looking for. I’m hoping you guys can help me out.
I bought a Chevrolet 350 block tonight. It’s a 2 bolt main. The individual I bought it off of didn’t know much about it.
I got the complete engine for 100.00. It looks like it spun a bearing on the crank. One of the crank bearings was nearly cut in half. I tore it all down and here are the numbers off the block. I’ll add the pictures. Hopefully they work. I basically want to turn this into a 355 to go into a 85 z28.
Is it a good block based off the serial numbers? Should I seek a 4 bolt main instead?
https://imgur.com/gallery/ZXiRRPb
I came across this forum and had to sign up after reading a few threads.
I had a 350 book but I can’t find it since I’ve moved. It has all the answers im
looking for. I’m hoping you guys can help me out.
I bought a Chevrolet 350 block tonight. It’s a 2 bolt main. The individual I bought it off of didn’t know much about it.
I got the complete engine for 100.00. It looks like it spun a bearing on the crank. One of the crank bearings was nearly cut in half. I tore it all down and here are the numbers off the block. I’ll add the pictures. Hopefully they work. I basically want to turn this into a 355 to go into a 85 z28.
Is it a good block based off the serial numbers? Should I seek a 4 bolt main instead?
https://imgur.com/gallery/ZXiRRPb
08-29-2018, 01:40 AM
#2
Junior Member
Thread Starter
Join Date: Aug 2018
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Re: Engine identification help
Here are the numbers to the best of my ability
I see a 638 and then 27 under it. Or it’s 627 under it.
Then I see a G70
I also see H8
27
638
do39 (at least that’s what it looks like)
5.7L6 or lg
GM SGT
14093638
The heads are numbered 18 and 19.
I can hardly read the numbers in them but I think this is what they are
141c2193 I could be way off
the intake has 14102182 and 9028 on it
I see a 638 and then 27 under it. Or it’s 627 under it.
Then I see a G70
I also see H8
27
638
do39 (at least that’s what it looks like)
5.7L6 or lg
GM SGT
14093638
The heads are numbered 18 and 19.
I can hardly read the numbers in them but I think this is what they are
141c2193 I could be way off
the intake has 14102182 and 9028 on it
08-29-2018, 02:42 AM
#3
Re: Engine identification help
87-95 350, TBI swirl port heads, with the roller cam provisions but a flat tappet cam it probably came out of a TBI pickup. The block is probably a decent enough place to start. Put a roller cam in it, and all the usual rebuild stuff. The heads are poor, I wouldn't put a penny into having them cleaned, checked for cracks, or rebuilt.
08-29-2018, 11:28 AM
#4
Junior Member
Thread Starter
Join Date: Aug 2018
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Re: Engine identification help
I was wondering if I could put a roller cam in. So I’m good to go on a roller cam?
I’ll put the heads for sale. Which cam do you guys suggest I go with? I want something mild. Nothing too aggressive.
I’ll put the heads for sale. Which cam do you guys suggest I go with? I want something mild. Nothing too aggressive.
08-29-2018, 11:49 AM
#5
Supreme Member
Re: Engine identification help
comp 285h get some vortec heads from a local rebuilder that have the guides done .
08-29-2018, 02:25 PM
#6
Banned
Re: Engine identification help
I used this website to figure out what motor was in my car. Someone put an L05 in my car. An L05 with TPI/ N10 is all torque.
http://www.1968ss.com/sbcnumbers.asp
http://www.1968ss.com/sbcnumbers.asp
Thread
Thread Starter
Forum
Replies
Last Post