5.0 Litre HO vs 5.0 Litre F.I. Decal Question
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2014
Location: Orlando FL
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Pontiac Trans Am WS6
Engine: 305 TPI
Transmission: 4 SPD AUTO Borg Warner 9 Bolt
5.0 Litre HO vs 5.0 Litre F.I. Decal Question
My 85 TA graphics have been replaced by the last owner. He put new graphics on the car and stupidly chose not to repaint it before he did this.
He bought the Phoenix Graphics 85-86 kit. The car currently has 2 '5.0 Liter H.O.' decals on the front fenders as well as the fade dot strips and the hood bird.
I'm repainting my car so all the decals have to go. After the repaint, I want to return it to stock appearance as much as possible so I will be ordering a new decal kit.
My engine is the 305 TPI so it's safe to say I would need 2 '5.0 Liter F.I.' decals correct as supplied from the factory.
I'm guessing there were mistakes from Van Nuys and Norwood where they would put 5.0 Liter H.O. decals on TPI cars.
He bought the Phoenix Graphics 85-86 kit. The car currently has 2 '5.0 Liter H.O.' decals on the front fenders as well as the fade dot strips and the hood bird.
I'm repainting my car so all the decals have to go. After the repaint, I want to return it to stock appearance as much as possible so I will be ordering a new decal kit.
My engine is the 305 TPI so it's safe to say I would need 2 '5.0 Liter F.I.' decals correct as supplied from the factory.
I'm guessing there were mistakes from Van Nuys and Norwood where they would put 5.0 Liter H.O. decals on TPI cars.
Last edited by FL TA; 03-27-2014 at 12:14 PM.
#2
Junior Member
Thread Starter
iTrader: (1)
Join Date: Feb 2014
Location: Orlando FL
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Pontiac Trans Am WS6
Engine: 305 TPI
Transmission: 4 SPD AUTO Borg Warner 9 Bolt
Re: 5.0 Litre HO vs 5.0 Litre F.I. Decal Question
Sorry for the Litre typo in the title. I got French Canadian dyslexic for a moment.
Last edited by FL TA; 03-27-2014 at 12:11 PM.
#3
Supreme Member
Re: 5.0 Litre HO vs 5.0 Litre F.I. Decal Question
#4
Supreme Member
iTrader: (5)
Join Date: Nov 2010
Location: Mantua NJ
Posts: 5,827
Received 64 Likes
on
57 Posts
Car: 1 Owner 1986 TA with a WS6 package
Engine: 5.0 EFI
Transmission: THM700R4
Axle/Gears: 277 Posi Speedo
Re: 5.0 Litre HO vs 5.0 Litre F.I. Decal Question
My 85 TA graphics have been replaced by the last owner. He put new graphics on the car and stupidly chose not to repaint it before he did this.
He bought the Phoenix Graphics 85-86 kit. The car currently has 2 '5.0 Liter H.O.' decals on the front fenders as well as the fade dot strips and the hood bird.
I'm repainting my car so all the decals have to go. After the repaint, I want to return it to stock appearance as much as possible so I will be ordering a new decal kit.
My engine is the 305 TPI so it's safe to say I would need 2 '5.0 Liter F.I.' decals correct as supplied from the factory.
I'm guessing there were mistakes from Van Nuys and Norwood where they would put 5.0 Liter H.O. decals on TPI cars.
He bought the Phoenix Graphics 85-86 kit. The car currently has 2 '5.0 Liter H.O.' decals on the front fenders as well as the fade dot strips and the hood bird.
I'm repainting my car so all the decals have to go. After the repaint, I want to return it to stock appearance as much as possible so I will be ordering a new decal kit.
My engine is the 305 TPI so it's safe to say I would need 2 '5.0 Liter F.I.' decals correct as supplied from the factory.
I'm guessing there were mistakes from Van Nuys and Norwood where they would put 5.0 Liter H.O. decals on TPI cars.
http://phoenixgraphix.com/transam/8586ta.php
I If you do order yours from PG make sure you ask for the pre cut version,
I had no luck with the rolled up ones.
#5
Moderator
Join Date: Mar 2001
Location: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Posts: 14,235
Received 164 Likes
on
119 Posts
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
Re: 5.0 Litre HO vs 5.0 Litre F.I. Decal Question
I actually think that my decals were actually Litre, not Liter.. on my Hood Scoop for My Formula... I might be wrong, but it has been some times since I looked at them...
John
John
#6
Supreme Member
iTrader: (4)
Join Date: Oct 1999
Location: GO PACK GO
Posts: 4,211
Likes: 0
Received 2 Likes
on
2 Posts
Car: 83Z28 HO
Engine: Magnacharged Dart Little M 408
Transmission: G Force 5 speed
Axle/Gears: Moser 9" w/Detroit Trutrac
Re: 5.0 Litre HO vs 5.0 Litre F.I. Decal Question
…forget it, you said Fuel Injected. Not sure how they spell it..Liter or Litre...
#7
Moderator
Join Date: Mar 2001
Location: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Posts: 14,235
Received 164 Likes
on
119 Posts
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
Re: 5.0 Litre HO vs 5.0 Litre F.I. Decal Question
I stand corrected, should have looked before speaking... My decals do say Liter, I have an NOS one here in my office... along with a pair NOS Firehawk 91-92 Fascia Emblems...
Trending Topics
#8
Supreme Member
Join Date: Nov 2011
Location: CT
Posts: 2,753
Received 259 Likes
on
150 Posts
Car: 1984 Chevrolet Camaro Z28
Engine: 5.0 Liter 4-BBL V8 High Output
Transmission: 5-Speed Manual
Axle/Gears: 3.73
Re: 5.0 Litre HO vs 5.0 Litre F.I. Decal Question
Litre Is Just A Variant Of Liter,More Widely Used On European Cars.
Thread
Thread Starter
Forum
Replies
Last Post
colton_carlson
Firebirds for Sale
7
03-08-2019 12:21 PM
Iroc8t8
TPI
43
08-26-2015 08:14 AM