Custom AL Diffuser
#1
TGO Supporter
Thread Starter
Custom AL Diffuser
I have all of the major pieces cut. The plate needs a 1” radius bent and it will be ready to tack together. Stay tuned.
#2
TGO Supporter
Thread Starter
Re: Custom AL Diffuser
I’ve got it about 90 percent welded. I should be able to finish and test fit it soon.
The following 3 users liked this post by soloc4:
#4
TGO Supporter
Thread Starter
Re: Custom AL Diffuser
Diffuser finish and installed. With the addition of the diffuser, the car is officially complete. This was the last piece of the puzzle. All that is left is to drive and enjoy the fruits of my labor.
The following 2 users liked this post by soloc4:
codyman125 (07-29-2023), Komet (07-29-2023)
#7
TGO Supporter
Thread Starter
Re: Custom AL Diffuser
The fiberglass cover wraps under the steel bumper that has 5 nutserts along the length. The diffuser sandwiches the cover between them. The front is attached at the corners of the quarter panels and on each side of the battery tray in the center. Overall there are nine 1/4” fasteners holding it place.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Dusenberry
Auto Detailing and Appearance
2
09-11-2014 05:33 PM