89formula350b2l

iTrader: (11)

Here is the article I am basing off of my idea http://www.gmhightechperformance.com...ipe/index.html

in fact, the car is almost the same as mine! Its a 396, i am a 385, we have same heads, same cam, they opted for SLP 1 3/4 headers, i have hedman 1 5/8 they had SLP exhaust i have Magnaflow..

1989GTATransAm

iTrader: (3)

IMHO they screwed things up with the "small" air filter. That 4" air pipe can flow somewhere around 1800cfm. That air filter is no where near that. A 3.5" pipe can flow around 1300cfm and is big enough for 99% of the applications. You just need an airfilter that flows the same or close to it.

Edit: After doing some research that air filter only flows 621cfm at 28". They really screwed up the test.

89formula350b2l

iTrader: (11)

Well I found an air filter thats about 9 inches long and after doing the math it flows around 1200-1300 cfm....so should be plenty....now trying to decide if i should get the Monoblade or stick with the 1000cfm TB

grover85

iTrader: (1)

My filter is about 9 inches long on my 4 inch intake.

Patrol32

What filter p/n# is this one, looks like a good filter. I heard some bad feed back of K&Ns being an expensive way to let garbage into your chamber, not quite so sure if that's true.

Anyways, What do you think of the oval shaped filter that sticks straight on the TB, theorticaly it should flow more due to no tunnel for air pass, it's all straight forward, from the skies and into your plenum. K&N p/n # KNN-RC-5050