Black00SS

iTrader: (5)

Purchased a 1987 Trans Am GTA, for some parts I need for my car. Will be parting the rest out.

I will get better pics, and more info once I get the car home (broke down due to a flat on the freaking Uhaul waiting on roadside assistance).

Here's what I do know so far....
Was a 305 TPI originally, has an old carbuerated 327 in it now. Looked like a BW 9 bolt, but not 100% sure. Rear disc brakes.
Has a digital dash, owner told me the car had around 80k on the odometer, but did not have time to verify (wanted to get loaded and go).

Going to use the GTA wheels, and GTA black seats for my car, but I will have the GTA wheels off of my car, and my black cloth regular TA/firebird seats available for sale.

Lmk if you need anything, and I will do my best to get pics/prices as soon as I can. PM, or here is fine.
I plan on pricing stuff out VERY reasonably, as I would like to be done with it in a month or so.

Thanks all!

banksGTA

iTrader: (3)

How much on the emblems?

Black00SS

iTrader: (5)

Have the nose emblem, both fenders, and 1 of the QP birds (other is missing).
Paint is faded on the emblems. 35.00 shipped.

slider1

iTrader: (2)

Is the original evaporative canister and solenoid still on the car?

Black00SS

iTrader: (5)

I believe so, I will check once I get home and let you know.

TwoTimeSC

How about the driver's side head rest complete with the attached shoulder belt Guide shipped to 35758?

Black00SS

iTrader: (5)

Using the front seats in my car, sorry.

Black00SS

iTrader: (5)

Its here, Idk what to ask for this, 35 bucks shipped?
Lmk

Black00SS

iTrader: (5)

GTA wheels, centers not included.

***************EDIT SOLD***************

Black00SS

iTrader: (5)

Exterior pics

Black00SS

iTrader: (5)

And more

Black00SS

iTrader: (5)

And more...

Black00SS

iTrader: (5)

More

slider1

iTrader: (2)

Thanks for checking on the evap canister but it's not the one I am looking for.

Black00SS

iTrader: (5)

No problem.

Black00SS

iTrader: (5)

Pic of switch from PM. Also some interior pics

Black00SS

iTrader: (5)

More interior pics

2012sergen11

iTrader: (1)

Where are you located in Ohio? may be interested in the rear axle and some other parts

Black00SS

iTrader: (5)

Uniontown Ohio, between Akron and Canton.

2012sergen11

iTrader: (1)

Ok i am in medina so not far from you. Pm incoming

Black00SS

iTrader: (5)

Front of car disassembled.....

Front bumper cover- 50 bucks pickup only
********Sold*********

Both fender ground effects (broken studs where the driver side mounts to the fender. Can get nuts started on 2 of the 3).- 30 bucks + shipping
************Sold************

***********Headlights, fog lights sold************
Front and side market lights still available, 30 bucks shipped.

Black00SS

iTrader: (5)

Last few tonight

Hood- 50 bucks. Took front vents out, have another set on the way for it though. Some dings, no rust, nice shape. Pickup only*******Sold*******

Rear taillights *******Sold*************

prossi

dibs on the front fender ground effects. Are there any cracks?
I also need the two door ground effect pieces

Black00SS

iTrader: (5)

Sorry bud, Sale is pending on the front/rear bumpers and all gfx. I will let you know if it falls through, if you are still interested at the time.

Thanks.

scooter

iTrader: (11)

Entire wiring harness and dash carrier? I would like to put a digital dash in my car. Also the push button HVAC control too

Black00SS

iTrader: (5)

I will check the harness as i get further into it. Idk if its been hacked or not.

I do not know the working order of the dash/switched anything, as they disconnected everything to hillbilly the 327 in, with the aftermarket gauges.

Let me get it all taken down, and I will let you know.
Thanks man.

Black00SS

iTrader: (5)

Continuing on with the disassembly, here is the driver side door. PW, PDL, PM. Surprisingly, even though the floor is rotted to hell, this door is in VERY nice shape.

No rust on the bottom inner edge, very clean. Has 1 small spot on the outside above where the ground effect was, about the size of a quarter. Can be wiped away with sandpaper easy.

Has a dent below the mirror as well. Looks like it can be easily popped out.

**************Sold driver, and passenger side doors********

scooter

iTrader: (11)

I really need/want the harness more than the cluster, even if the harness is hacked a bit I can fix it, just makes it cheaper for me , right? If the dash carrier is hacked/cracked/broken I just need the cluster area really.

Let me know
Thanks

Black00SS

iTrader: (5)

Understood, I'll keep you posted.

Black00SS

iTrader: (5)

If anyone needs a front or rear bumper bar that is not rotted out like they normally are, ones on the car are good.
20.00 each local pickup, or I'll leave em bolted on when she goes to the crusher.

prossi

[QUOTE=Black00SS;6187035]Sorry bud, Sale is pending on the front/rear bumpers and all gfx. I will let you know if it falls through, if you are still interested at the time.

Thanks.[/QUOTE/]


Keep me posted please

Black00SS

iTrader: (5)

Rear hatch pics for PM requests. Has rear defrost. Lid has some rust underneath. Spoiler is junk.

40.00 local pickup.

bluensilver89Ta

Thanks good price I'm in Florida though 😔

Black00SS

iTrader: (5)

No prob, lmk if you need anything else (smaller) .

Thanks man!

Black00SS

iTrader: (5)

Wheels, t-tops, and T-top bag sold.

Black00SS

iTrader: (5)

Updating thread
Front bumper cover
Rear bumper cover
All ground effects
Front air dam
Tail lights
Coolant overflow tank
All sold!

Black00SS

iTrader: (5)

Update sold-
Headlights/motors
Rear hatch pulldown motor
Power Antenna
Fog lights
Spare tire
All Sold!

Black00SS

iTrader: (5)

Both doors sold!

Pics of the car as it sits, and the rusted out driver side floor pan. Really is a shame, as the floor rusted from the inside out because of a T-top leak.

Other than this spot, and the driver side quarter panel bottom, the car is relatively solid. I really wish I had the time, facilities to save it, but can't and too late now 😔

If somebody out there needs a passenger quarter panel, passenger floor pan, trunk sheet metal, etc this would be a great car to rob the sheet metal from......

Black00SS

iTrader: (5)

Updating the thread.
Interior sold
327 engine sold
Sale pending on rear axle, trans, hood, roller.

Not much left here guys, dual electric fan setup, serpentine setup, WS6 36MM front, and 24MM rear sway bars......
Lmk what you need.

Black00SS

iTrader: (5)

Everything sold or pending.

Black00SS

iTrader: (5)

Hood, serpentine setup, dual electric cooling fans, WS6 front and rear sway bars, and rear hatch available again.

Hood-50.00******Sold*******
Sway bars-50.00 for the pair.
Serpentine setup- 50.00
Dual electric cooling fans- 50.00
Rear hatch 40.00

Local pickup on most. May ship the fans, sway bars, or serpentine setup, but its at the buyers expense.

Still have the fenders, shell with some good sheet metal, and some other nickel dime things under the hood.

PM if you need any info.
Thanks!

Black00SS

iTrader: (5)

Hood and transmission sold.

Here is a summary of what it left of the car.

Roller-Driver side floor rotted out from the front seat brace to the toe kick. Passenger side is nearly perfect.
Truck floor is great, no hole for a fuel pump replacement hack job.
Passenger side quarter panel is in good shape, driver side is rusted out at the bottom
Front fenders are rusted at the bottoms, and they were jacked on.
Under the hood-firewall is good, area below the heater box is good, battery tray has surface rust but it solid. Both strut towers are in very good shape.
Core support is smashed at the top (looks like they dropped the engine on it when they pulled it).

Rear axle still available- BW 9 bolt, disc brakes, 3.27 posi. Driver side caliper is gone. 24MM rear sway bar still attached. E-brake cables still there and intact.

Front suspension is complete. WS6 springs, and 36MM sway bar still there, along with the steering box.

Steering column, master cylinder, proportioning valve, wiper motor, and blower motor still there.

Hatch still there, with the spoiler. Poor condition.

Fuel tank, heat shields, all still attached and under the car.

Loose items-complete serpentine setup still available, dual electric cooling fans with top and bottom supports still available.

Y-pipe, single cat, and cat back exhaust complete and in good shape. It has a flowmaster muffler on it.

Couple more days, and she is going to the crusher. Lmk if you need anything, or would be willing to sell everything listed above for 150.00. You would need to bring a set of wheels to bolt on to the car to roll it (on jackstands now).

brp88gta

PM sent

TOM305T/A

did headlights work properly before lights were taking out of the car. if so how much for the headlight control module

lonsal

iTrader: (2)

PM sent

NachoIroc

PM sent

Black00SS

iTrader: (5)

This car is long gone guys, sorry. Only have a few little pieces left off of it, nothing major.

Dstransam1

I need a passenger headlamp assembly

Dstransam1

i need the front bumper retainers

Black00SS

iTrader: (5)

I have another 87 I am going to start parting soon. This one is gone though