91 RS part out
11-07-2015, 09:16 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2009
Location: Wichita, KS
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
91 RS part out
I'm parting out my 91 RS. Car is maroon with black interior. Was originally a 305 Auto car. Was going to do a LS t56 swap in it but it sat to long and didn't get done. I wound up inheriting a 94 z28 that the ls stuff will be going into instead. Things that are already sold are:
Seats, dash pad, door panels, fender liners, ebrake handle, pass fender, front bumper and probably some things I'm forgetting.
Things I have:
5spd shifter plate with decent lettering, power window and lock buttons with print on them, fog light switch, fog light harness, ground effects minus chin spoiler and passenger door piece, black plastics, brand new never installed black abs headliner with visors and sail panels, nice hatch pull shade, hatch pull down motor, brand new iroc springs front and rear, new front spring isolators, black hatch carpet in decent shape, gauge cluster (110), ac controls. anything else just ask.
Seats, dash pad, door panels, fender liners, ebrake handle, pass fender, front bumper and probably some things I'm forgetting.
Things I have:
5spd shifter plate with decent lettering, power window and lock buttons with print on them, fog light switch, fog light harness, ground effects minus chin spoiler and passenger door piece, black plastics, brand new never installed black abs headliner with visors and sail panels, nice hatch pull shade, hatch pull down motor, brand new iroc springs front and rear, new front spring isolators, black hatch carpet in decent shape, gauge cluster (110), ac controls. anything else just ask.
11-09-2015, 08:47 AM
#3
Member
iTrader: (1)
Join Date: Jul 2015
Location: Schaumburg, IL
Posts: 223
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1992 Polo Green RS Z03
Engine: L03 - 5.0 Liter V8 TBI
Transmission: MD8 – 4 SPD Auto
Axle/Gears: GU2 - 2:73 Ratio
Re: 91 RS part out
Looking for OEM "GUIDE" headlights . . . in the center of the lens says "GUIDE" . . thanks.
11-09-2015, 05:40 PM
#5
Want a title? Post!
Join Date: Mar 2015
Location: South Louisiana
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 RS
Engine: Stock 305
Transmission: 700R4 w/some work
Axle/Gears: Stock 10 Bolt 2.73's
Re: 91 RS part out
What kind of shape is the console lid in? If its in good shape, how much? I also need the fiberglass headlight mounting bracket and the front turn signals.
Last edited by Smattress; 11-09-2015 at 05:42 PM. Reason: I forgot to put another item
11-09-2015, 07:53 PM
#6
Junior Member
Thread Starter
Join Date: Jan 2009
Location: Wichita, KS
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Re: 91 RS part out
I don't have the headlight mounting bracket, it went with the bumper cover. Console lid is in good shape from the top and not cracked on the bottom. It seems to be pulling away from the plastic on the underside, its hard to explain. I was going to run it in my car, don't think you'd notice it. If you are familiar with how the arm rest can curl its kinda doing something similiar. I have both the front signals and the side markers that go in the fenders. Front signals are hazy just like everybody else's that hasn't bought new ones or tried to clean them up. $50 shipped for console lid and $25 shipped for the front turn signals.
11-10-2015, 05:59 PM
#7
Member
Join Date: May 2015
Location: North Phoenix, Az
Posts: 272
Likes: 0
Received 2 Likes
on
2 Posts
Engine: 305 TBI/305 TPI
Transmission: World Class T5/missing
Axle/Gears: 3.08/G92 3.45 posi
Re: 91 RS part out
do you have a picture of the shifter plate? I don't care about the condition of the boot or if it is even there, just the plastic. I am looking for one that isn't cracked anywhere. Lettering would be nice, but since this is a 91 it will have yellow so I will probably cover it anyways.
I am also interested in the window switches if the price is right. I don't need the wiring harness, just the switches.
I am also interested in the window switches if the price is right. I don't need the wiring harness, just the switches.
Trending Topics
11-10-2015, 06:30 PM
#8
Junior Member
Thread Starter
Join Date: Jan 2009
Location: Wichita, KS
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Re: 91 RS part out
shifter plate is in good shape with no cracks. lettering is white, its not from a 91. I will add pics to my gallery. Don't know how to add them to the thread without using photobucket. $40 shipped for the switches, $75 shipped for the shifter plate.
Thread
Thread Starter
Forum
Replies
Last Post
TheCardinal
Interior Parts Wanted
4
10-09-2015 09:43 PM