SLP Header y pipe exhaust gasket part number
05-02-2014, 03:55 AM
#1
SLP Header y pipe exhaust gasket part number
So for those of who are looking for a replacement part number for the SLP Header y pipe exhaust gasket I spent this afternoon trying to to find the correct replacement exhaust gasket for the y pipe
This is the part number I will be using for my SLP Header y pipe replacement exhaust gasket for me my install:
EG24057
The brand is called ROL Gaskets
They were $1.49 each and I bought two to replace my old worn out stock SLP y pipe exhaust gaskets.
Hopefully this info is convenient for someone else because I had to spend a portion of the afternoon trying to source up a part number after being unsuccessful at finding this part number on here.
This is the part number I will be using for my SLP Header y pipe replacement exhaust gasket for me my install:
EG24057
The brand is called ROL Gaskets
They were $1.49 each and I bought two to replace my old worn out stock SLP y pipe exhaust gaskets.
Hopefully this info is convenient for someone else because I had to spend a portion of the afternoon trying to source up a part number after being unsuccessful at finding this part number on here.
Last edited by IBrockZ; 05-02-2014 at 06:15 AM.
05-02-2014, 07:03 PM
#2
Supreme Member
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,652
Likes: 0
Received 46 Likes
on
44 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: SLP Header y pipe exhaust gasket part number
You mean the 2.25" donut gaskets? Not a very uncommon part to find.
05-02-2014, 08:22 PM
#3
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,723
Received 773 Likes
on
520 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: SLP Header y pipe exhaust gasket part number
Its a normal parts house 2 1/4 -2 1/2 doughnut gasket. Almost any brand will work.
ROL was sold to another company or has closed shop so any gaskets from them you get are old stock.
Now if you want a challenge, find the gaskets for the tri-Y header collector/Y pipe.
ROL was sold to another company or has closed shop so any gaskets from them you get are old stock.
Now if you want a challenge, find the gaskets for the tri-Y header collector/Y pipe.
Last edited by TTOP350; 05-02-2014 at 10:52 PM.
05-02-2014, 08:37 PM
#4
Re: SLP Header y pipe exhaust gasket part number
The ones I purchases were 2.5 inch that's what fits into my SLP y pipe as far as I can tell haven't installed them yet will be installing the y pipe and wrapping up tonight. It's not that it was super hard to find the right gasket it was just a lil time consuming figured I'd share a part number just in case some one wanted to search the board rather than trying to find the part that will work in the stores. As for the company going out of business hopefully who ever bought them out will use the same part number but I doubt it lol.
05-05-2014, 06:22 AM
#5
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,115
Received 1,688 Likes
on
1,283 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: SLP Header y pipe exhaust gasket part number
It's the stock donut for a lot of big blocks.
Any parts store will have it; ask for something like, a 76 Suburban 454. Should get the right thing.
Brand doesn't too much matter. AutoZone has em in FelPro for example.
Comes in 3 flavors: all-metal (which is what I prefer), all-composition, or composition with metal cladding on one side.
Any parts store will have it; ask for something like, a 76 Suburban 454. Should get the right thing.
Brand doesn't too much matter. AutoZone has em in FelPro for example.
Comes in 3 flavors: all-metal (which is what I prefer), all-composition, or composition with metal cladding on one side.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
TA8487
Engine/Drivetrain/Suspension Wanted
1
08-16-2015 12:21 PM
