starter wires and passenger manifolds
04-14-2014, 11:19 PM
#1
Supreme Member
Thread Starter
iTrader: (6)
Join Date: Aug 2009
Location: Elwood, IN
Posts: 3,670
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1986 camaro Sports Coupe
Engine: L31 350
Transmission: 89 700R4
Axle/Gears: 3.42 gov lock
starter wires and passenger manifolds
Any tips on however I to get these two to play nice to each other? I cant seem to keep my starter wires from the manifold.
04-15-2014, 09:48 PM
#2
Re: starter wires and passenger manifolds
Heat shield for the starter?
This for the wires?
http://www.summitracing.com/dom/part...0115/overview/
This for the wires?
http://www.summitracing.com/dom/part...0115/overview/
04-18-2014, 04:16 PM
#3
Re: starter wires and passenger manifolds
not sure abotu yoru motor, but on the back/passenger side of my motor is a small tube that my wires to through. I then used one of those plug wire heat shields to cover the exposed part of the wires. Similar to what LB9GTA posted over the exposed wires.
Thread
Thread Starter
Forum
Replies
Last Post
db057
TBI
10
08-11-2015 10:11 PM