will these fit says for 86 and up mines an 84
#1
Member
Thread Starter
Join Date: Dec 2006
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 camaro z28
Engine: 350sbc
Transmission: TKO 600
Axle/Gears: stock axle with 4.11's
will these fit says for 86 and up mines an 84
i have a '84 z28 with a 350 in it...just curious if the hooker 2055s will fit with no problems reason i ask is everywhere i look says its made for the 86 and up cars...and only reason i can figure that is cuz of the 3" slip on cat which i do have a 3"slip on cat...anyone give me some info on why they are for 86 and up...and if they will fit my car please let me know...i only know of one reason why ppl go ceramic coated and thats to keep the heat down any other reasons why and how hot will it get if its not ceramic coated...any problems with ceramic coated headers...does hooker do good job of ceramic coating theres or should i get the cheaper painted ones and get them ceramic coated somewhere else for a cheaper price..???
#2
Moderator
iTrader: (5)
Re: will these fit says for 86 and up mines an 84
They'll fit (86+ because they were designed for TPI cars, IIRC). Anyway, I run the uncoated version on my 85 and haven't experienced any "heat-related" problems. The coating may contribute to the header's longevity.
JamesC
JamesC
Last edited by JamesC; 04-07-2008 at 06:04 AM.
#3
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Correct, they only list the applications for which they bolt into the exhaust. They'll fit the engine and chassis just fine.
I've heard both good and bad about Hooker's ceramic coating. It's fairly safe to just order them directly from Jet Hot - they'll buy the headers, coat them inside & out, and ship them to you.
I've heard both good and bad about Hooker's ceramic coating. It's fairly safe to just order them directly from Jet Hot - they'll buy the headers, coat them inside & out, and ship them to you.
#4
Banned
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: will these fit says for 86 and up mines an 84
Basically, the engine/chassis doesn't change through the years. Only the exhaust pipe.
If your exhaust isn't stock, then that issue doesn't apply anymore.
If your exhaust isn't stock, then that issue doesn't apply anymore.
#5
Member
Thread Starter
Join Date: Dec 2006
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 camaro z28
Engine: 350sbc
Transmission: TKO 600
Axle/Gears: stock axle with 4.11's
Re: will these fit says for 86 and up mines an 84
thx i thought they would fit just wanted to be sure would hate to buy them and have to ship back...so it be best if i buy from jet hot is that what yall saying...does it come with all the same stuff...as the set from summit??
Thread
Thread Starter
Forum
Replies
Last Post
Street Lethal
Power Adders
634
04-30-2019 12:14 PM
355tpipickup
Alternative Port EFI Intakes
2
08-26-2015 04:08 PM