Car sound clips...
#1
Member
Thread Starter
Join Date: Dec 2005
Location: San Antonio, Texas
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Car: Red 1984 Z-28
Engine: 4.8 LS
Transmission: 4L60E
Axle/Gears: 3.73
Car sound clips...
Well I finally just got 2 sound clips for my car up. They are pretty crappy quality, so bare with me.
Rundown on the exhaust:
Hooker 2055's and y-pipe
Catco High-Flow Cat 9118
Dynomax 3-inch I-pipe and over-the-axle pipe
3-inch Chambered Exhaust muffler (3-inch inside diameter) in stock location
90* bend and dump after the muffler
Engine is a completly stock L69.
First clip is just an exhaust idle.
Putfile - My Exhaust Idle
Next clip is blipping the throttle a little and then taking it to 3000 rpm.
Putfile - Throttle blip
Just want to hear some feedback...
As far as my opinion on the exhaust sound, pretty F'n nice! Nice, deep, gurrgle idle, and really starts to get loud past 2000-2500. Only downside, is the high rpm CLAPING. Gah. If I could only keep that loud roar I have from 1500-3000, all the way through my rpms, this would be amazing. Anyone have any ideas on how I could get that? Or do I just need a different muffler? Was curious about mabye a Borla XR-1 race muffler, or somethin. Just need fellow thirdgenners help. Thanks alot!
I will get more clips later. Couple drive-bys. And some high-rpm revving so you guys can hear the clap....hehe.
DH
Rundown on the exhaust:
Hooker 2055's and y-pipe
Catco High-Flow Cat 9118
Dynomax 3-inch I-pipe and over-the-axle pipe
3-inch Chambered Exhaust muffler (3-inch inside diameter) in stock location
90* bend and dump after the muffler
Engine is a completly stock L69.
First clip is just an exhaust idle.
Putfile - My Exhaust Idle
Next clip is blipping the throttle a little and then taking it to 3000 rpm.
Putfile - Throttle blip
Just want to hear some feedback...
As far as my opinion on the exhaust sound, pretty F'n nice! Nice, deep, gurrgle idle, and really starts to get loud past 2000-2500. Only downside, is the high rpm CLAPING. Gah. If I could only keep that loud roar I have from 1500-3000, all the way through my rpms, this would be amazing. Anyone have any ideas on how I could get that? Or do I just need a different muffler? Was curious about mabye a Borla XR-1 race muffler, or somethin. Just need fellow thirdgenners help. Thanks alot!
I will get more clips later. Couple drive-bys. And some high-rpm revving so you guys can hear the clap....hehe.
DH
#2
Junior Member
Join Date: Apr 2006
Location: Ladner, BC Canada
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro Iroc-Z
Engine: Built 355 LT1 T-Trim
Transmission: T56 6 spd
Axle/Gears: 9 bolt 3.73 gears
Just a quick before any tunning idle vid
r6endo - Photobucket - Video and Image Hosting
r6endo - Photobucket - Video and Image Hosting
#4
Member
Thread Starter
Join Date: Dec 2005
Location: San Antonio, Texas
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Car: Red 1984 Z-28
Engine: 4.8 LS
Transmission: 4L60E
Axle/Gears: 3.73
All right, try this...
http://dl025.filefactory.com/dl/f/e7...e71987ee31d36/
Its a mpeg file, and you'll have to download it.
BTW, don't mind the print across the movie, its from a converter I had to download. Stupid thing...
http://dl025.filefactory.com/dl/f/e7...e71987ee31d36/
Its a mpeg file, and you'll have to download it.
BTW, don't mind the print across the movie, its from a converter I had to download. Stupid thing...
Last edited by DocHoliday; 10-09-2006 at 03:06 PM.
Thread
Thread Starter
Forum
Replies
Last Post