DacMan

lol ok five7 ill keep the hp down, with that in mind (and a low budget) I am now looking at a 350 short block crate motor made in the 90s that a guy has, he only wants 50 bucks for it, and it can run a mechanical fuel pump. I have a really nice friend who has a mild cam and pocketed and ported heads for free. Ive got the carb buy an aftermarket intake or a junkyard intake even, then buy lifters, and pushrods, gasket set. Swith the starter and the dist over from my 305 and walla 350 for around 200 buckaroos

five7kid

iTrader: (14)

If you can, get the head casting #'s.

I've lost track of what you're starting with. A stock LG4 aluminum intake is fine for a mild 350. I have a couple laying around, one could find it's way to you, I'm sure.

DacMan

That'd be awsome, i'll get em because I don't want to use my intake, although it is aluminum...

marekdennhardt

Hey dac hows it goin man? are you getting close to putting that thing on the road??

I got mine on the road a couple weeks ago.

DacMan

Well congratulations mark! I'm doing ok, I got the 305 torn down and took off the timing cover. And the timing chain has about an inch of play... it hasn't jumped but it's so loose that the timings off, so i believe that's one of the many reasons ive had so much trouble with this car.

marekdennhardt

well keep it up

luke j

iTrader: (1)

Why don't you just pull that 305 and put a real engine in there. Did you get it back together today? I bet that thing runs completely different with the new timing set on it. You can't go wrong with quality parts.

DacMan

Will do,

Are you running a v8 yet?

luke j

iTrader: (1)

All of my vehicles have v8s, pal.

DacMan

Ohh lol, sorry luke i didn't see your post there i was commenting on marks post, i got the timing chain on (but not without a fight) but I can't get the timing cover to line up right. It is at an angle and won't allow the ballancer to go on correctly. I think it's because of the oil pan gasket.

Thanks for asking, DacMan

DacMan

Ohh yeah, also any suggestions ohh great v8 powered sorcerer, lol.

luke j

iTrader: (1)

Oh I don't know, maybe a bad *** 385 or a nice monte with a vortec headed 350 and 5 speed, or both.

DacMan

lol touche!! I agree I would love to have you know who's monte, that thing is right up my ally and not totally destroyed past repair.

luke j

iTrader: (1)

I think you should definitely buy it later on, maybe next year. send me your email address on a pm. I lost it.

DacMan

Sent

DacMan

Does anyone know if there is a difference between intake and exhaust valve springs?!?!?!?!?!?

DacMan

I know it's been a long time since I posted here, but I have been making progress, decided to remove 305 completley and replace it with a 350 w/ 305 heads and intake, won't have much in the quarter but should kill it in the 1/8. A cam duration of 443 and flat top pistons should give a static compression ration of 10.6 to 1. Hopefully that will lower when I calculate the valves in, I want it to run on pump gas, will post pics later this week or next.

Cheers, DacMan

Awesome-X

Why did you decide to go with 305 heads? Whats the casting?

DacMan

Well they were convenient, and they are the 58cc ho heads which were the ideal heads, I can't remember the casting somthing like 14166 or somthing IDK. I was really popular a few years ago before vortecs, they don't flow all that well but there's a lot of low range torque. I would have bought vortecs but the heads and intake were free since I owned em.

DacMan

Alright so I got something done today, I decided to repaint my block satin black cause I think it'll look sick with the valve covers I re-did today. First pic is with a lot of cleaning... they were in really rough shape.
Second pic is of them all cleaned and painted, they look like they dripping wet
Third pic is of the maro cause it's bitchin'

Dac

DacMan

Got the 350 in and man is it sweet!!!! Lots of throttle response.

marekdennhardt

What the hell!!!! I remember your car being stripped with no paint and a non running 305. I got an email saying you got a 350 so I came here thinking that you would be fartin around with it. But now you got a gorgeous looking maro with a sweet 350 in it! Where the hell have I been?

Nice job man, Wow that thing looks awesome!!

Awesome-X

Yeah he's come a long way. Funny how long this thread has been up and he JUST NOW got a 350 lol

marekdennhardt

aha yea I was thinking that also. Well he beat me to it at least.. Painting and engine. But yea, finally the 350 swap + build thread has come true.

Awesome-X

We're so proud of you Dac lol. Seriously though, the car looks great and the motor looks great. Good to see you're getting her together the way you want her to be.

DacMan

Thanks guys, she's come a long way. I couldn't have done it w/o the help of this thread, and the generous help of LukeJ, A very wise Monte Carlo expert, and my good friends at napa.

Stonehenge

iTrader: (3)

Wow, they look professionally done.. good work. Going to keep up with your build. Just picked up an 87 rust free for the most part IROC.. no motor or tranny..$500 Going to use you as inspiration, so don't let me down..lol

Stone

DacMan

Sweet Man,

Sounds like a good deal. Rust free is a must, no one wants to do what i did.

84-Z28-Canada

This thread has been an awesome read! I bought a 84 Z28 this year, 305 with a decent body. Had to put a new front end in, brakes, starter, and clean the HELL out of the whole car...but man am I thrilled with it. Never had more fun! Dac, your build has taught me a lot about cheap and easy stuff to do at home, and as soon as the car is out of storage, I'm doing it all! Thanks everybody, especially you DacMan

Drive on!

DacMan

No problem, Happy thirdgening!

DacMan

Well guys we have a new problem... I can't keep the tires planted on a launch, this thing has too much torque for an inexperienced driver!!! I'm thinking new tires, and some rear end suspension upgrades might help it stick, but im laying at solid patch at 45 mph (i havn't tried full throttle at higher speeds yet), I'm thinking a posi rearend is a must! Anyway bottom line is that this thing is a blast!

Awesome-X

Well congrats Dac I'm glad you're enjoying it! And I think I have some news you might enjoy. I drug my black Camaro out of the swamp it was in and got it roadworthy today. Brand new tires, calipers, brake pads, rubber lines, spark plugs, yada yada. I fixed the power steering problem I had and adjusted the carb a bit.

How do you like that edelbrock? I'm thinking about getting the same one.

DacMan

I love my edelbrock, if i had to do it over again i would have sprung for the endura shine, i found out the performer serries is made by magnetti marelli, which is bull **** bc i thought that it was all american, might consider holley next time. I really need tire though lol ohhh yeah PICS?????

Awesome-X

The tires come in tomorrow morning. For right now I have old 14 inch S-10 rims on the front and some cragers on the back. It actually still looks pretty good to be honest. I'll snap some pics tomorrow.

What do you get for gas mileage? I got 27 mpg out of my 1406 and the 355 T top maro I had. I'm hoping for similar in this car.

DacMan

27, I'd be estatic to get 20 on straight highway miles with a 243 rear end :/ I have to run primium, and it's cammed, with super high compression.

Awesome-X

I'm getting 20 with the Camaro I'm driving now. But the choke is shut all the time and the idle is 1500 rpm lol. I'm working on that.

Awesome-X

Dac where did you ever go to????

marekdennhardt

dacman

Awesome-X

Wonder what ever happened to him. I sent him a PM but never got a response..