Knock sensor question--
#1
Supreme Member
Thread Starter
Join Date: Dec 2001
Location: Brampton
Posts: 1,214
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Z28 Vert
Engine: 305
Transmission: TKO
Axle/Gears: 3.55 10-bolt
Knock sensor question--
I did a search and didnt find a definate answer regarding what Knock sensor would work for my application...so i will see what the GURU's have to say...
Anyways I am finishing off my 305 to 350 swap and the question of which Knock sensor to use crops up. The new 350 has a haudralic Flat Tappet Cam..so I understand I need a specific Knock sensor specific for a 350 with a Haudraulic Flat Tappet cam....so which P/N or even Model/year knock sensor should I use?
Thanks in advance!
Dave
Anyways I am finishing off my 305 to 350 swap and the question of which Knock sensor to use crops up. The new 350 has a haudralic Flat Tappet Cam..so I understand I need a specific Knock sensor specific for a 350 with a Haudraulic Flat Tappet cam....so which P/N or even Model/year knock sensor should I use?
Thanks in advance!
Dave
#3
Supreme Member
Thread Starter
Join Date: Dec 2001
Location: Brampton
Posts: 1,214
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Z28 Vert
Engine: 305
Transmission: TKO
Axle/Gears: 3.55 10-bolt
Re: Knock sensor question--
Thanks man,
But I have heard that the roller cam's vs hyd flat tappet need diffent types of knock sensors because one is much more "agressive" than the other.
I believe the L98 is a roller cam....any ideas on what I should use with a Hyd Flat tappet?
Thanks guys,
Dave
But I have heard that the roller cam's vs hyd flat tappet need diffent types of knock sensors because one is much more "agressive" than the other.
I believe the L98 is a roller cam....any ideas on what I should use with a Hyd Flat tappet?
Thanks guys,
Dave
#5
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Not true.
I have heard that knock sensors and solid lifters don't play well together. But, there's nothing about flat tappet hydraulic lifters that would upset a knock sensor.
I have heard that knock sensors and solid lifters don't play well together. But, there's nothing about flat tappet hydraulic lifters that would upset a knock sensor.
Thread
Thread Starter
Forum
Replies
Last Post