[NC] *WTB* Complete TPI Intake Manifold
#1
Junior Member
Thread Starter
Join Date: May 2020
Posts: 3
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 5.0 TBI
Transmission: 700r4
Axle/Gears: 2.73
*WTB* Complete TPI Intake Manifold
Looking to add TPI to my 305 TBI. Looking to keep it cheap and preferably the MAP style. I'm located around Jacksonville, NC.
#3
Junior Member
Thread Starter
Join Date: May 2020
Posts: 3
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 5.0 TBI
Transmission: 700r4
Axle/Gears: 2.73
#7
Junior Member
Re: *WTB* Complete TPI Intake Manifold
I have a set up from my 89 I could sell you. The plenum and runners are hand polished. The runners need a little TLC. Intake fuel rail with 24lb injectors and adjustable BBk fuel pressure regulator. I bought a FIRST setup so I have no need for it. I do not have the torque bolts though
Trending Topics
#8
Junior Member
Thread Starter
Join Date: May 2020
Posts: 3
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 5.0 TBI
Transmission: 700r4
Axle/Gears: 2.73
Re: *WTB* Complete TPI Intake Manifold
#10
Sponsor
iTrader: (92)
Re: *WTB* Complete TPI Intake Manifold
not vortec but on sbc center intake holes are at 72 degrees on the vette 128 and 113 heads 90 degrees.
so to correct you elongate the intake center 4 holes .
i have a lot of plenums to choose from a polished one, stock runners 85-88 throttle body.
can put together with your choice of parts for $300 plus ride no harness or ecm just intake.
#15
Sponsor
iTrader: (92)
Re: *WTB* Complete TPI Intake Manifold
https://www.thirdgen.org/forums/engi...-complete.html
#16
Junior Member
Re: *WTB* Complete TPI Intake Manifold
Honeslty I’m not sure. It’s kinda nice stock set up. I might be able to mount it together tomorrow with an Allan head set I have and take a picture. There is the air foil with the throttle body as well. The runner polishing is no where near perfect. Injectors only have 7000 miles on them but they are 13 years old and need new o rings to the intake. $700 I think would be fair but I would want you to see pics first
#18
Junior Member
Thread Starter
Join Date: May 2020
Posts: 3
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 5.0 TBI
Transmission: 700r4
Axle/Gears: 2.73
Re: *WTB* Complete TPI Intake Manifold
Well I'm sorry everyone, y'all have some very nice offers but I got a great deal on a complete L98 in town so I'm just gonna work with that. Thank y'all! Have a nice day
Thread
Thread Starter
Forum
Replies
Last Post
LiquidBlue
Engine/Drivetrain/Suspension Wanted
2
05-12-2019 04:11 PM
MattVette89
Engine/Drivetrain/Suspension Wanted
2
05-02-2010 09:27 PM