Need a 3rd gen 10-bolt
#1
Need a 3rd gen 10-bolt
So my 9-bolt axle project didnt pan out...
Anyone have a 10-bolt? The closer it is to this state, the more I would like it. MUST be a third gen 10-bolt.
89-92 rear disc brakes (You can keep the brakes, even, sell them to someone who needs em, I just need the backing plates)
89-92 28-spline axles
I already have a Torsen posi, so you can keep that, your carrier, your gears AND the brakes, or if it has an open carrier, I just dont care.
None of those are required, but it's what Im looking for. Let me know what you have.
Anyone have a 10-bolt? The closer it is to this state, the more I would like it. MUST be a third gen 10-bolt.
89-92 rear disc brakes (You can keep the brakes, even, sell them to someone who needs em, I just need the backing plates)
89-92 28-spline axles
I already have a Torsen posi, so you can keep that, your carrier, your gears AND the brakes, or if it has an open carrier, I just dont care.
None of those are required, but it's what Im looking for. Let me know what you have.
Last edited by InfernalVortex; 11-09-2014 at 05:02 PM.
#2
Junior Member
Join Date: Oct 2014
Location: mesa arizona
Posts: 2
Received 0 Likes
on
0 Posts
Car: 91 camaro rs
Engine: 305 l03
Transmission: 700r4
Axle/Gears: stock
Re: Need a 3rd gen 10-bolt
So my 9-bolt axle project didnt pan out...
Anyone have a 10-bolt? The closer it is to this state, the more I would like it. MUST be a third gen 10-bolt.
89-92 rear disc brakes (You can keep the brakes, even, sell them to someone who needs em, I just need the backing plates)
89-92 28-spline axles
I already have a Torsen posi, so you can keep that, your carrier, your gears AND the brakes, or if it has an open carrier, I just dont care.
None of those are required, but it's what Im looking for. Let me know what you have.
Anyone have a 10-bolt? The closer it is to this state, the more I would like it. MUST be a third gen 10-bolt.
89-92 rear disc brakes (You can keep the brakes, even, sell them to someone who needs em, I just need the backing plates)
89-92 28-spline axles
I already have a Torsen posi, so you can keep that, your carrier, your gears AND the brakes, or if it has an open carrier, I just dont care.
None of those are required, but it's what Im looking for. Let me know what you have.
Thread
Thread Starter
Forum
Replies
Last Post