[CA] 1989 Borg Warner 9bolt rear with 3.27 gears.
#2
Junior Member
Join Date: Nov 2008
Location: Topeka, KS
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Car: Blue 86 IROC-Z
Engine: 305 TPI, Soon a 355 TPI
Transmission: Auto, Soon a WCT-5
Axle/Gears: Nine Bolt, 3.42 posi
Re: 1989 Borg Warner 9bolt rear with 3.27 gears.
I am a long ways away from California (Kansas) but, I have one I would like to get out of the garage.
I bought this from 3rd Gen Ranch awhile back and have since decided the motor I am building warrants a 9" rear end. This has the disk brakes but, honestly they are pretty rough. I also have a good 9 bolt disk brake kit i bought off of ebay that could be thrown into the negotiations.
Let me know if the distance doesn't scare you off and I can send you some pictures of what I have.
I bought this from 3rd Gen Ranch awhile back and have since decided the motor I am building warrants a 9" rear end. This has the disk brakes but, honestly they are pretty rough. I also have a good 9 bolt disk brake kit i bought off of ebay that could be thrown into the negotiations.
Let me know if the distance doesn't scare you off and I can send you some pictures of what I have.
#3
Junior Member
Join Date: Mar 2005
Location: Wichita Falls,TX
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1989 Borg Warner 9bolt rear with 3.27 gears.
I've got one, but I'm in Texas. I shipped an axle a couple years ago and Fedex wanted $!50 to ship to Kentucky I believe.
#4
Re: 1989 Borg Warner 9bolt rear with 3.27 gears.
Sure thats no problem. I PM'ed you.
I am a long ways away from California (Kansas) but, I have one I would like to get out of the garage.
I bought this from 3rd Gen Ranch awhile back and have since decided the motor I am building warrants a 9" rear end. This has the disk brakes but, honestly they are pretty rough. I also have a good 9 bolt disk brake kit i bought off of ebay that could be thrown into the negotiations.
Let me know if the distance doesn't scare you off and I can send you some pictures of what I have.
I bought this from 3rd Gen Ranch awhile back and have since decided the motor I am building warrants a 9" rear end. This has the disk brakes but, honestly they are pretty rough. I also have a good 9 bolt disk brake kit i bought off of ebay that could be thrown into the negotiations.
Let me know if the distance doesn't scare you off and I can send you some pictures of what I have.
#6
Junior Member
Join Date: Mar 2005
Location: Wichita Falls,TX
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1989 Borg Warner 9bolt rear with 3.27 gears.
It was in a 40,000 mile car when I got it. I put 3-5,000 on it behind a 2.8. Its in good shape. The car has sat fo 6-8 years.
#8
Junior Member
Join Date: Mar 2005
Location: Wichita Falls,TX
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1989 Borg Warner 9bolt rear with 3.27 gears.
Its under the car. I can get pics tomorrow. What do you want to see in the pictures? PM me with a cell number and I'll get them to you.
#9
Member
iTrader: (1)
Join Date: May 2009
Posts: 403
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Z28 T-Top 36mm sway & wonderbar
Engine: TPI L98 350 W/85 Vette Stage II ECM
Transmission: W/C T-5, alum drive shaft
Axle/Gears: 9 bolt posi, 3:27, PBR's, BB LS1's
Re: 1989 Borg Warner 9bolt rear with 3.27 gears.
I bought a 9 bolt rear from ThirdGenRanch and it was total piece of worn out junk! I had to replace everything.
Last edited by 85 ZXX; 12-23-2012 at 06:53 PM.
#11
Want a title? Post!
Join Date: Jan 2013
Location: Astoria ny
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 recaro trans an
Engine: Zz4
Transmission: T-56
Axle/Gears: 3.73
Re: 1989 Borg Warner 9bolt rear with 3.27 gears.
i have a 3.73 kit full of all the seals needed for rebuild and a aluminum cover for sale if you are interested
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
09-17-2020 08:26 AM