[Sold] Spohn Tubular K-Member
#1
Supreme Member
Thread Starter
iTrader: (3)
Join Date: Jan 2001
Location: Conroe, TX
Posts: 3,165
Received 54 Likes
on
40 Posts
Car: 1987 GTA
Engine: LS1
Transmission: 4L60e
Spohn Tubular K-Member
*Update: All parts sold.
Up for sale is some hardly used parts (never been run on the road!). Red Spohn tubular K-member for SBC (can use the Spohn LS1 mounts with this if desired). K-Member is ~11 years old. As such, the Spohn may have a newer versions than this (looks the same to me though). K-Member does not have the mounts for the triangle braces. I've also got the motor mounts to go with this set to fit an LS engine, if the buyer is interested. This K-Member will fit aftermarket or stock control arms. You'll gain quite a bit of room for working under the engine, and same weight savings. Comes with K-member to body bolts.
Parts at the vendor:
* Spohn Tubular K for SBC
Bought new, you'd be looking at $480 for the K-member. This has have never even been run on the road and had its entire life bolted to a car in a garage. Local pickup in the Houston, TX area only - $250. If you want the LS1 motor mounts that fit it, those will be an extra $50.
K-Member (Control Arms not included):
Up for sale is some hardly used parts (never been run on the road!). Red Spohn tubular K-member for SBC (can use the Spohn LS1 mounts with this if desired). K-Member is ~11 years old. As such, the Spohn may have a newer versions than this (looks the same to me though). K-Member does not have the mounts for the triangle braces. I've also got the motor mounts to go with this set to fit an LS engine, if the buyer is interested. This K-Member will fit aftermarket or stock control arms. You'll gain quite a bit of room for working under the engine, and same weight savings. Comes with K-member to body bolts.
Parts at the vendor:
* Spohn Tubular K for SBC
Bought new, you'd be looking at $480 for the K-member. This has have never even been run on the road and had its entire life bolted to a car in a garage. Local pickup in the Houston, TX area only - $250. If you want the LS1 motor mounts that fit it, those will be an extra $50.
K-Member (Control Arms not included):
Last edited by 3.1EyeCandy; 02-28-2021 at 07:54 PM. Reason: Status Update
#2
Member
iTrader: (2)
Join Date: Jun 2007
Location: Albuquerque NM
Posts: 129
Likes: 0
Received 17 Likes
on
14 Posts
Car: 1985 IROC
Engine: 350HO
Transmission: 5 speed
Axle/Gears: 10 bolt 3.23 limited slip
Re: Spohn Tubular K-Member & BMR A-Arms
I’d love to have this for the project I’m working on. My sister in law has some family in H town. I’m going to see if I can work something out. Or if you change your mind and are willing to ship to Albuquerque, NM 87110 and we could work something out let me know. - Ted
Last edited by Bustionironi; 01-14-2021 at 01:54 PM.
#4
Junior Member
iTrader: (4)
Join Date: Jan 2009
Location: Owensboro, Ky
Posts: 63
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 WS6 T/A
Engine: Turbo 383 with Holley Sniper
Transmission: factory 5 speed now Powerglide
Axle/Gears: Strange 12 bolt w/373 locker
Re: Spohn Tubular K-Member & BMR A-Arms
Id also be interested if shipping were an option
#5
COTM Editor
iTrader: (22)
Join Date: Mar 2001
Posts: 9,932
Likes: 0
Received 1,861 Likes
on
1,275 Posts
Car: '89 Firebird
Engine: 7.0L
Transmission: T56
Re: Spohn Tubular K-Member & BMR A-Arms
Half off for never used parts? Smokin' deal!
#7
Supreme Member
Thread Starter
iTrader: (3)
Join Date: Jan 2001
Location: Conroe, TX
Posts: 3,165
Received 54 Likes
on
40 Posts
Car: 1987 GTA
Engine: LS1
Transmission: 4L60e
Re: Spohn Tubular K-Member and UMI Tubular A-Arms
Control arms no longer reserved. Adjusted original post with details and new pictures.
Trending Topics
#9
Supreme Member
Thread Starter
iTrader: (3)
Join Date: Jan 2001
Location: Conroe, TX
Posts: 3,165
Received 54 Likes
on
40 Posts
Car: 1987 GTA
Engine: LS1
Transmission: 4L60e
Re: Spohn Tubular K-Member and UMI Tubular A-Arms
K-Member and Control Arms are reserved for a local member for the time being. If you have interest, please either reply here or PM. Again - full set for local pickup only, or control arms shipped to the lower 48.
#11
Supreme Member
Thread Starter
iTrader: (3)
Join Date: Jan 2001
Location: Conroe, TX
Posts: 3,165
Received 54 Likes
on
40 Posts
Car: 1987 GTA
Engine: LS1
Transmission: 4L60e
Re: Spohn Tubular K-Member and UMI Tubular A-Arms
Everything is still available. A local member is wanting to buy the LCAs, but the deal has not gone through yet.
#12
Supreme Member
Thread Starter
iTrader: (3)
Join Date: Jan 2001
Location: Conroe, TX
Posts: 3,165
Received 54 Likes
on
40 Posts
Car: 1987 GTA
Engine: LS1
Transmission: 4L60e
Re: Spohn Tubular K-Member and UMI Tubular A-Arms
Control arms sold locally. K-Member still for sale. Updated info in original post.
#13
Junior Member
iTrader: (4)
Join Date: Jan 2009
Location: Owensboro, Ky
Posts: 63
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 WS6 T/A
Engine: Turbo 383 with Holley Sniper
Transmission: factory 5 speed now Powerglide
Axle/Gears: Strange 12 bolt w/373 locker
Re: Spohn Tubular K-Member
Still not considering shipping?
#14
Supreme Member
Thread Starter
iTrader: (3)
Join Date: Jan 2001
Location: Conroe, TX
Posts: 3,165
Received 54 Likes
on
40 Posts
Car: 1987 GTA
Engine: LS1
Transmission: 4L60e
Re: Spohn Tubular K-Member
Assuming that I could find a box to fit the K-member and match what Spohn can ship them for, it would be around $130-150 for shipping alone. This is primarily due to the size, but also the weight. Adding it up, that's $400 for a used K-member without finding a box to fit it. I'll look into either how to get a custom-size 1-off box, or stitch a few together with loads of tape.
It gets pricey pretty quick to ship things that don't fit into standard size boxes. It's not that I'm against shipping, it just starts making the value equation for the buyer tougher to deal with (or for the seller, if they reduce margins further).
I haven't had any serious bites on the K-member local. I'll start figuring out how this can be shipped. You're first in line. You okay with no control arms coming with it? Obviously, it will be your call on whether the final price including shipping is okay.
It gets pricey pretty quick to ship things that don't fit into standard size boxes. It's not that I'm against shipping, it just starts making the value equation for the buyer tougher to deal with (or for the seller, if they reduce margins further).
I haven't had any serious bites on the K-member local. I'll start figuring out how this can be shipped. You're first in line. You okay with no control arms coming with it? Obviously, it will be your call on whether the final price including shipping is okay.
#15
Junior Member
iTrader: (4)
Join Date: Jan 2009
Location: Owensboro, Ky
Posts: 63
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 WS6 T/A
Engine: Turbo 383 with Holley Sniper
Transmission: factory 5 speed now Powerglide
Axle/Gears: Strange 12 bolt w/373 locker
Re: Spohn Tubular K-Member
Thats cool. Ive already got control arms. But if the shipping isn't outrageous, we'll definitely work something out. I appreciate it man. By the way I'm located in Owensboro, KY 42301
Thread
Thread Starter
Forum
Replies
Last Post
jamieriplilb
Engine/Drivetrain/Suspension Parts for Sale
23
02-17-2008 11:15 PM