5.7 Manifolds w/ Jet-Hot coating for sale
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2014
Location: Boston, MA
Posts: 47
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Trans Am
Engine: L69
Transmission: T5
5.7 Manifolds w/ Jet-Hot coating for sale
Hi,
I have a set of manifolds for later 5.0 and 5.7 Camaro and Firebird. They are part 14094064 and 1409463. These are the High Output manifolds. They have been coated with Jet-Hot 1300 "extreme" ceramic coating with a cast-iron topcoat color. They have never been used or installed. Please not I've highlighted in red where there is a very small ding/dent to back of passenger manifold. This was there before the coasting and shouldn't be an issue but could easily be ground down if desired/needed. Was going to use them on a project but decided to go a different direction. $500 for both + shipping (they are about 25 lbs). Can pickup if you're in the Boston area. Price is less than the total cost of the coating itself.
-John
I have a set of manifolds for later 5.0 and 5.7 Camaro and Firebird. They are part 14094064 and 1409463. These are the High Output manifolds. They have been coated with Jet-Hot 1300 "extreme" ceramic coating with a cast-iron topcoat color. They have never been used or installed. Please not I've highlighted in red where there is a very small ding/dent to back of passenger manifold. This was there before the coasting and shouldn't be an issue but could easily be ground down if desired/needed. Was going to use them on a project but decided to go a different direction. $500 for both + shipping (they are about 25 lbs). Can pickup if you're in the Boston area. Price is less than the total cost of the coating itself.
-John
Thread
Thread Starter
Forum
Replies
Last Post
bjpotter
Auto Detailing and Appearance
5
05-31-2015 05:16 PM