IROCZman15

iTrader: (25)

Since my camaro project build is currently coming to its end for this winter, I went through some of the parts I removed and some I had in boxes in my basement. I am not looking to make big $ on this stuff, but more hoping it can go to a good home.

All items are sold individually, or if you want to buy a variety of stuff, we can come up with a fair price.



oem upper strut mounts, steering linkage components, sway bar brackets, etc $50 for all of it or split up parts for cheaper



oem style radiator, worked fine for many years, I simply upgraded toa bigger rad to handle the new engine $50





upper and lower radiator hoses and stock style water pump



Ram-air sheetmetal box setup with included K&N filters and plastic mounting base. ram air box sells for $100 on its own. mine is painted black and already mounted and with filters. will take $100 for the whole setup
https://www.hawksmotorsports.com/cam...ram-air-boxes/





also two Y-intake air box setups: make offer

IROCZman15

iTrader: (25)

Jegs brand Distributor, gen 1 sbc uses remote mounted coil, comes with new spare cap and rotor too $60





4th gen style coolant overflow tank and battery mount (allows you to eliminate the clunky tank on the inner fender and hide it under the battery, which mounts to the top of the tray. comes with the aluminum mounting plate I built to work on my car $35





oil and trans dipsticks, fender brackets, brake lines etc



gm fuel pump and sending unit ( i think its from a 4th gen fbody) ??
[[img]https://live.staticflickr.com/65535/49582293141_f29d08d2da_c.jpg





working charcoal canister $20




vacuum ball cansiter $10



if no price is listed, just make me a reasonable offer. and plan on paying shipping costs too.

BOOBYE

iTrader: (3)

Will take

working charcoal canister $20
vacuum ball cansiter $10
oil and trans dipsticks
1 Y-intake air box setups

let me know how much to
92583

Thanks,

IROCZman15

iTrader: (25)

ok cool! great. I will get everything in a box and bring it to the post office for a shipping quote. perhaps ups also if I get a chance.

edit, I have two Y-intakes, one is better quality. il'l see it for 25, and the lesser quality one for 15 ? you pick and let me know..

...also.. did you want just the Y-intake or do you want it with the Ram-air box and filters and plastic bumper mount plastic?


here is what I have put off to the side for you, let me know. I'll check shipping to 92583 tomorrow for you





ALSO for sale:

Stock oem auto shifter, partial B&M auto shifter, oem steering wheel, spring isolators, right and left side wedge spoiler pieces for camaro, center console lid (make offer for prices for each)




[

BOOBYE

iTrader: (3)

Will take it just as picture shows it.
$25 works.
Pm when you have total and your PayPal information.
Please include houses on canister and vacuum ball just as it shows on original picture.

Thanks

IROCZman15

iTrader: (25)

Will do. hoses are included


I just went to ups($72) and usps ($55) and got shipping quotes to your zip code

I sent you a PM too with my cell number in case you wanted to text or call




update: the coolant expansion tank, distributor and spare cap, and B&m megashifter have now been sold.

IROCZman15

iTrader: (25)

update on the sold parts:
: the coolant expansion tank, distributor and spare cap, and B&m megashifter, oil dipstick, trans dipstick, charcoal canister, vac ball, coolant tank

jmi88SC

iTrader: (1)

Hi Dave, I’ll take ram air/k&n set up. Let me know shipping to 08089. Thank you, Joe.

IROCZman15

iTrader: (25)

cool. Sounds good. I’ll send you shipping info and my PayPal info in a PM

IROCZman15

iTrader: (25)

so, still for sale is:

the radiator, upper strut mounts, steering and suspension components (photo #1), oem shifter, oem wheel (no horn button), rear spoiler side triangle pieces, that fuel pump, water pump, hoses, and one Y intake piece

.. I am looking to offload this stuff CHEAP ! I don't want to throw any of it away, so make an offer and I'll probably agree. Just plan on paying shipping also though

Roblaza

iTrader: (1)

How much you need for the spoiler corners? And are they cracking at all?

IROCZman15

iTrader: (25)

I was thinking $25 for the both of them plus shipping so probably about $35-40 grand total ? They are actually in great shape. I can take more photos of them later if you would like

Roblaza

iTrader: (1)

Thatd be great if you don't mind snapping a couple more for me. Mine are cracked and I'd like to replace them.

IROCZman15

iTrader: (25)

sure here ya go:














ALSO, guys,
...
my basically brand new, hardly used Lokar Anchor Tight polished tranmission dipstick for 700R4 is up for sale.
here is the story. Lokar makes two lenghts of these dipstick/dipstick tubes in the locking anchor-tight configuration. one is 26" long, one is 13"... for my brand new build I wasnt sure which one I needed until the trans was installed and I wasn''t going to wait around to measure find out. I bought the long one, LOKAR part number 1210144, installed it and was hoping to be able to creatively mount/route it in the engine bay. it was still too long for my freshly bare, smoothed, and painted firewall, so I ordered the short one to replace it (LOKAR part number 1210134). it arrived and i installed it in place of the longer one. BOTH install using the bolt-through pan-nut.
-the one I am selling is THE LONG 26" firewall mount one, locking, anchor tight, brite polished finished. Retails for about $154 on summit or jegs. https://www.summitracing.com/parts/lok-1210144
--- instructions on how to install it can be found here: https://www.lokar.com/assets/instruc...ockTransDS.pdf
it looks great, it really does. installs in about 30 minutes. you WILL need to drop the trans pan, so plan on buying a pan gasket and some fluid.. but you needed to do that anyways right!?!?! you are overdue for a trans fluid/filter service, I know you are!!!
-- it comes with the neat little push in plug for transmission removal, storage, or transportation purposes. it also comes with the hex install key. I switched the firewall mount bracket from the short one to be on the long one, so thats the one you get, the one in the photo at the top of the dipstick tube. the yellow packaging in the photo is for the short tube setup which I am not selling, but shown in the packaging is the plug and the hex install key that you need


I will sell it for $75 plus $10 shipping. exactly as seen in the photos below. it is a nice piece.