THIRDGEN SBC TURBO KIT
#1
THIRDGEN SBC TURBO KIT
Asking $1000.00 or Best Offer
BBS (Bermudez Brainstorming Designs)
that was specifically made to fit 3rdgens.
The kit includes everything EXCEPT TURBOCHARGER.
The Turbo that this kit was designed to work with is a Turbonetics 62-1 but it looks like any turbo with a T4 flange will work.
It was also designed to fit the 85-87 V-belt equipped cars, but a serpentine setup can be used if you delete AC and the smog pump.
This is the same kit that is used on this car:
http://www.superchevy.com/…/0707gm-1992-pontiac-firebird-f…/
The kit comes with the following:
Turbo header
Crossover Pipe
Driver's side header
Boost gauge
Alcohol Injection kit
Downpipe
Pipe to connect downpipe to catback
All oil lines
Tubing to run from turbo to the intake
Intake duct for the turbo and filter
2-BAR MAP sensor
Turbonetics WasteGate
The kit is set up to work on a TPI, but will work with just about any small block chevy.
If you want to run an intercooler, you have to buy an intercooler and run the piping yourself.
All you need is the turbo which costs around $800 (for a quality one!) and you have a bolt in turbo kit ready to go.
BBS (Bermudez Brainstorming Designs)
that was specifically made to fit 3rdgens.
The kit includes everything EXCEPT TURBOCHARGER.
The Turbo that this kit was designed to work with is a Turbonetics 62-1 but it looks like any turbo with a T4 flange will work.
It was also designed to fit the 85-87 V-belt equipped cars, but a serpentine setup can be used if you delete AC and the smog pump.
This is the same kit that is used on this car:
http://www.superchevy.com/…/0707gm-1992-pontiac-firebird-f…/
The kit comes with the following:
Turbo header
Crossover Pipe
Driver's side header
Boost gauge
Alcohol Injection kit
Downpipe
Pipe to connect downpipe to catback
All oil lines
Tubing to run from turbo to the intake
Intake duct for the turbo and filter
2-BAR MAP sensor
Turbonetics WasteGate
The kit is set up to work on a TPI, but will work with just about any small block chevy.
If you want to run an intercooler, you have to buy an intercooler and run the piping yourself.
All you need is the turbo which costs around $800 (for a quality one!) and you have a bolt in turbo kit ready to go.
Thread
Thread Starter
Forum
Replies
Last Post