When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a 350 Chevy 638 roller block that has been fully machined. Includes the crank that is ground .020/.020. Pistons are bored .030 over. Block is painted Chevy Orange. This block is ready to build. I also have a box of all of the parts that came off this engine when it ran that is included in the sale. Also includes a engine stand that the block is on.
Asking $500 obo. Let me know if you have any questions!
how do you bore a piston? You might want to list if its 2 or 4 bolt since pics don't show this. Is crank steel or cast? is block bored properly for fuel pump pushrod, some are some are not (may be issue for a carbed guy needing mechanical pump
638 is a 1pc seal and it is roller ready
how do you bore a piston? You might want to list if its 2 or 4 bolt since pics don't show this. Is crank steel or cast? is block bored properly for fuel pump pushrod, some are some are not (may be issue for a carbed guy needing mechanical pump
638 is a 1pc seal and it is roller ready
You are correct that I should have put all of this in the ad.
Cylinders are bored .030 over. Crank is cast. The block is bored for a mechanical fuel pump. Block is a 2 bolt 1pc seal and roller ready.
07-30-2019, 03:24 PM
You might want to list if its 2 or 4 bolt since pics don't show this. Is crank steel or cast? is block bored properly for fuel pump pushrod, some are some are not (may be issue for a carbed guy needing mechanical pump 