[CA] ****SOLD****Arizona Speed and Marine large tube runners
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: May 2014
Location: SoCal
Posts: 17
Received 0 Likes
on
0 Posts
Car: 1988 Iroc Z
Engine: 5.7
Transmission: 700r4
Axle/Gears: 9 bolt 2.77
****SOLD****Arizona Speed and Marine large tube runners
I have a brand new (only mounted) set of AS&M large tube runners for sale. These are the best looking in my opinion and keep the TPI setup "stock looking" looking to get 550 plus shipping. Also, these don't have the 9th injector provision. If you need more detailed pictures you can text me at (818)292-3309 thanks for looking!
Last edited by Irocan88; 12-09-2018 at 03:59 PM. Reason: Sold
#2
Sponsor
iTrader: (92)
Re: Arizona Speed and Marine large tube runners
Just a FYI There only $475 plus the ride at Arizona speed and marine.
https://azspeed.com/product/1989-199...ntake-runners/
Last edited by Steve86TA; 12-07-2018 at 08:13 PM.
#3
Junior Member
Thread Starter
iTrader: (2)
Join Date: May 2014
Location: SoCal
Posts: 17
Received 0 Likes
on
0 Posts
Car: 1988 Iroc Z
Engine: 5.7
Transmission: 700r4
Axle/Gears: 9 bolt 2.77
Re: Arizona Speed and Marine large tube runners
Just a FYI There only $475 plus the ride at Arizona speed and marine.
https://azspeed.com/product/1989-199...ntake-runners/
#4
Supreme Member
iTrader: (1)
Join Date: Jul 2013
Location: *member since 1999, I think - just can't remember my old name, and the big site crash...*
Posts: 1,199
Received 151 Likes
on
105 Posts
Car: 89 GTA ASC Conv., Prev: 89 GTA 6.3L
Engine: 5.7L L98 TPI
Transmission: 700r4 Automatic
Axle/Gears: 3.27:1 w/ JG1 Options:B2L, N10, U1A
Re: Arizona Speed and Marine large tube runners
Does AZ Speed & Marine still make these? They seem to have been out of stock forever. Great product though. I remember going to AZ Speed back in 1991 and seeing them make these. That, and their Big Block EFI set-up. Very cool.
#5
Junior Member
Thread Starter
iTrader: (2)
Join Date: May 2014
Location: SoCal
Posts: 17
Received 0 Likes
on
0 Posts
Car: 1988 Iroc Z
Engine: 5.7
Transmission: 700r4
Axle/Gears: 9 bolt 2.77
Re: Arizona Speed and Marine large tube runners
That must have been a sight to see how they manufactured them, the coolest third gen memories I have are passing by the Van Nuys plant and seeing an F body on display. I was only in 1st grade but boy did I enjoy seeing them.
#6
Supreme Member
iTrader: (1)
Join Date: Jul 2013
Location: *member since 1999, I think - just can't remember my old name, and the big site crash...*
Posts: 1,199
Received 151 Likes
on
105 Posts
Car: 89 GTA ASC Conv., Prev: 89 GTA 6.3L
Engine: 5.7L L98 TPI
Transmission: 700r4 Automatic
Axle/Gears: 3.27:1 w/ JG1 Options:B2L, N10, U1A
Re: Arizona Speed and Marine large tube runners
I honestly don't know, but they are super lightweight and larger than factory which should mean added performance. right ? lol
That must have been a sight to see how they manufactured them, the coolest third gen memories I have are passing by the Van Nuys plant and seeing an F body on display. I was only in 1st grade but boy did I enjoy seeing them.
That must have been a sight to see how they manufactured them, the coolest third gen memories I have are passing by the Van Nuys plant and seeing an F body on display. I was only in 1st grade but boy did I enjoy seeing them.
I don't know, either. It's been years since I wrote or called them.
A buddy of mine had a set on his 1988 Corvette which made HUGE power. With the runners, it looked kinda stock, too. It wasn't.
#7
Senior Member
Re: Arizona Speed and Marine large tube runners
Just a FYI There only $475 plus the ride at Arizona speed and marine.
https://azspeed.com/product/1989-199...ntake-runners/
NOOICE come back O.P.
Last edited by no new tires; 12-09-2018 at 11:37 AM.
Trending Topics
#8
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,744
Received 800 Likes
on
531 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: Arizona Speed and Marine large tube runners
Great runners. Need to add a set of these to my hoard someday
#10
Re: Arizona Speed and Marine large tube runners
just at FYI "lol"
none of the runners are being produced i had called asam and tpis a few yrs ago the slp accel and eldelbrock are also done same goes for the bases
i believe the only aftermarket larger tpi component you can still get would be the Vortec Base from scoggin dickey and the fist intake
the asam runners are a nice piece the runners are actually at tad bit longer than even the stock pieces so they are great for torque
you have them priced just fine considering how much tuned performance lists his stuff for hes the last guy that should be talking i have all the old catalogs used to be able to get runners for under 300 shipped bases would go for under 500 shipped new
none of the runners are being produced i had called asam and tpis a few yrs ago the slp accel and eldelbrock are also done same goes for the bases
i believe the only aftermarket larger tpi component you can still get would be the Vortec Base from scoggin dickey and the fist intake
the asam runners are a nice piece the runners are actually at tad bit longer than even the stock pieces so they are great for torque
you have them priced just fine considering how much tuned performance lists his stuff for hes the last guy that should be talking i have all the old catalogs used to be able to get runners for under 300 shipped bases would go for under 500 shipped new
Last edited by BHR; 12-09-2018 at 09:51 AM.
#13
Re: Arizona Speed and Marine large tube runners
finding asam runners in the classified or ebay ect are harder than finding the slp accel edelbrock stuff and imo having own all, in terms of flow the asam runners are the best out of the box same goes with the original accel and tpis base
the accel, asam,and tpis stuff should be worth more than slp and edlebrocks with the exception to the first design slp runners and the slp t ram
irocan88 has them priced accordingly
#14
Junior Member
Thread Starter
iTrader: (2)
Join Date: May 2014
Location: SoCal
Posts: 17
Received 0 Likes
on
0 Posts
Car: 1988 Iroc Z
Engine: 5.7
Transmission: 700r4
Axle/Gears: 9 bolt 2.77
Re: Arizona Speed and Marine large tube runners
Thanks for the input gentlemen, I meant no disrespect to Tuned Performance but I know what I had, I say “had” because they are now sold.
Thread
Thread Starter
Forum
Replies
Last Post
ev305tpi
Engine/Drivetrain/Suspension Parts for Sale
3
04-20-2015 10:08 PM
z28redline
Engine/Drivetrain/Suspension Parts for Sale
9
01-05-2014 10:00 PM
Steve Mack
Engine/Drivetrain/Suspension Parts for Sale
6
08-05-2008 03:24 PM
Steve Mack
Engine/Drivetrain/Suspension Parts for Sale
2
04-11-2007 10:43 AM
Winger4800
Engine/Drivetrain/Suspension Parts for Sale
10
10-29-2006 08:59 PM