[PA] hooker long tubes new price 200
#1
Junior Member
Thread Starter
iTrader: (3)
Join Date: Feb 2009
Location: Perkasie, PA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Iroc Z28
Engine: 350
hooker long tubes new price 200
Hooker long tube headers 2138-hkr these headers are no longer made
They will not get in the way of the clutch hydraulics like alot of the other
Long tubes and they are the only tuned equal lenth headers for third gens
2.5 inch collectors 1 and 5/8 runners if you look closely at the picks you
will see they are designed to run in the factory exhaust location the left
Header runs in front of the sump on the oil pan and the right header
kicks out to the right as well . You will have to get an exhaust shop
to fab a merge collector or y pipe but they can be ran to the factory
exhaust the rear runner is seperate on both headers to make installing
Easy . They are in good shape the rust is just suface stuff didnt want to
Pretty them up wanted you to see exactly what you were getting they
Are in good shape no dings or bends right at 500 new
No shipping 250 picked up
They will not get in the way of the clutch hydraulics like alot of the other
Long tubes and they are the only tuned equal lenth headers for third gens
2.5 inch collectors 1 and 5/8 runners if you look closely at the picks you
will see they are designed to run in the factory exhaust location the left
Header runs in front of the sump on the oil pan and the right header
kicks out to the right as well . You will have to get an exhaust shop
to fab a merge collector or y pipe but they can be ran to the factory
exhaust the rear runner is seperate on both headers to make installing
Easy . They are in good shape the rust is just suface stuff didnt want to
Pretty them up wanted you to see exactly what you were getting they
Are in good shape no dings or bends right at 500 new
No shipping 250 picked up
Last edited by 88Z350; 07-10-2016 at 11:24 AM. Reason: new price
Trending Topics
#8
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,723
Received 773 Likes
on
520 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: hooker long tubes
Those are crazy fun to install !!!
#9
Junior Member
Thread Starter
iTrader: (3)
Join Date: Feb 2009
Location: Perkasie, PA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Iroc Z28
Engine: 350
Re: hooker long tubes
The install of the headers not bad both rear tubes come off making it easier , I've done it on the ground with jackstands and with the car on a lift . Lift makes it easier but not bad either way
The wifes car has had 4 diferent sets of headers on it ,there was a set of these on it twice . I pulled these off a car i was putting back stock . I had this style on a tpi motor and they worked really good when i put this style on the wifes stealth ram set up we lost torgue not because of the headers because of the intake.so we decided to start playing with the headers and the exhaust , we tryed running duals all the way back and with the two merged in a factory style set up .both ways the torque was about 30 ft lbs less than mid lenths that are on it now
The wifes car has had 4 diferent sets of headers on it ,there was a set of these on it twice . I pulled these off a car i was putting back stock . I had this style on a tpi motor and they worked really good when i put this style on the wifes stealth ram set up we lost torgue not because of the headers because of the intake.so we decided to start playing with the headers and the exhaust , we tryed running duals all the way back and with the two merged in a factory style set up .both ways the torque was about 30 ft lbs less than mid lenths that are on it now
Last edited by 88Z350; 07-07-2016 at 07:40 AM.
#20
Thread
Thread Starter
Forum
Replies
Last Post
BG1959
Engine/Drivetrain/Suspension Wanted
7
07-20-2016 02:22 PM