When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
just as the title says car was a 305 TPI auto black interior hardtop if you need something just ask I stock thousands of parts if its not on this car it could have been on another I had the wiring harness is gone but most other parts are still here
I'm wondering if you have the tpi egr solenoid if so. Specifically looking for a 1989 camaro 5.7 tpi egr solenoid. How much would you want for it shipped to 93640.
Last edited by sowhatudoing; 01-27-2016 at 01:48 AM.
I am missing some bolts/hardware from the front end. Is the body hardware in excellent condition or rusty? I am looking for the nuts/bolts/clip-nuts/plates connecting the front GFX (#47) to the front bumper cover (#46) and air guides (#65 & 68), as well as the air dam.
How much for a bag of bolts?
I saw in another thread the GFX-to-fender stud-plates (#48) are not available. Fortunately for me, only one of the studs bent over on disassembly, so 5 of 6 are good.
MantyZ28 do you know if the Tuneport engine accessories(a/c, alternator, Power steering, etc) will bolt up to a 3.1 V6? What would you charge for all the front accessories?
Stock torque arm mount with all 3 bolts? The mount the hooks up to the tranny, and the torque arm bushing sits in. I imagine it's the same for the 700r4 and the t5. I have a t5 and I need a stock mount. Bushing condition is irrelevant.
Where in WI? With the exception of the color of the interior, and the hard top, its her twin. There are quite a few things i'm looking for, but to name a few...
Is she AC, or just heat?
im looking for most of the parts to the black interior.
And does anybody know if I can put drum brakes on a disc rear end? looking for the easiest swap, and keep mine origional looking. Tons of info going the other way.
hmmm, i was hoping you where closer so i could just swing by and take a look... but if i'm buying parts, its not too far to pick them up.
list of parts i need that you might have...
interior
driver side kick panel
both door panels w/hardware (for non-electric windows)
rear seat backs
read drivers side side cover /carpeted (where the DS sail panel mounts to and behind)
plastic trim under passenger side door
hangers that go through the sail panel
seat belts
visors
And does anybody know if I can put drum brakes on a disc rear end? looking for the easiest swap, and keep mine origional looking. Tons of info going the other way.
01-21-2016, 09:15 AM
