[Sold] TPI Setup For Sale
#1
TPI Setup For Sale
Selling this TPI setup that came out of my '89 IROC that had a 305. The engine ran ok until I spun the main bearings and parked the car 2 years ago.
Comes with upper plenum, distributor cover plate (missing screws), throttle body, runners, intake, t-stat housing, EGR valve, fuel rails, fuel pressure regulator, and injectors. I'm leaving the TPS and IAC on the throttle body, but the TPS is cracked at the connector area. I had my son put this together and he cross threaded one of the runner to plenum bolts so I repaired that with a helicoil and you can see that circled in one of the attached pics. I measured resistance of the injectors tonight, had 14.4 ohms on one of them, the other seven are right near 16 ohms (15.9-16.2).
Asking $175 O.B.O. for the whole setup. I would prefer local pickup because this weighs about 40+lbs, but I will ship it if you're willing to pay shipping costs.
Edit to add:
This also includes the bolts for the lower intake to heads, and the other sensors (ECT & IAT, I think) seen in the pics.
Comes with upper plenum, distributor cover plate (missing screws), throttle body, runners, intake, t-stat housing, EGR valve, fuel rails, fuel pressure regulator, and injectors. I'm leaving the TPS and IAC on the throttle body, but the TPS is cracked at the connector area. I had my son put this together and he cross threaded one of the runner to plenum bolts so I repaired that with a helicoil and you can see that circled in one of the attached pics. I measured resistance of the injectors tonight, had 14.4 ohms on one of them, the other seven are right near 16 ohms (15.9-16.2).
Asking $175 O.B.O. for the whole setup. I would prefer local pickup because this weighs about 40+lbs, but I will ship it if you're willing to pay shipping costs.
Edit to add:
This also includes the bolts for the lower intake to heads, and the other sensors (ECT & IAT, I think) seen in the pics.
Last edited by Lurbie; 10-03-2014 at 06:11 PM. Reason: mention additional parts and O.B.O.
#3
Re: TPI Setup For Sale
Like most TPI sets that sell here, I'd also like to sell the whole thing and be done with it instead of trying to find a place to store what doesn't sell. However, if I can't sell this complete very quickly, I'll begin to piece it out to whoever wants what. Since you asked first, list what pieces you're interested in and that will put you first in line for those parts, if I can't sell this complete.
I'm not sure what the individual parts usually go for so let me know what you're interested in and I'll have to look into it to see what's reasonable or you can just throw an offer out there too.
Others can feel free to do the same.
I'm not sure what the individual parts usually go for so let me know what you're interested in and I'll have to look into it to see what's reasonable or you can just throw an offer out there too.
Others can feel free to do the same.
#4
Junior Member
Join Date: Nov 2012
Location: Melbourne,Fl
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: 5.0 liter v8
Transmission: t5
Axle/Gears: 3.73
Re: TPI Setup For Sale
i need the passenger side runner, the throttle bracket if you have it the distributor cover and the thermostat housing
#8
#9
Junior Member
Join Date: Nov 2012
Location: Melbourne,Fl
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: 5.0 liter v8
Transmission: t5
Axle/Gears: 3.73
Re: TPI Setup For Sale
Lyrik, I need the passenger side runner and am in the process of buying a set since no one will separate them, if you still need the driver side in a few days I could sell it to you
#10
Re: TPI Setup For Sale
Yes, please. I absolutely need it.. one runner on the drivers side is freaking crushed.
Please. Dont forget me. lol. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
evilstuie
Tech / General Engine
22
01-09-2020 08:29 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM