TPI performance Parts for ZZ4 Build
07-08-2014, 08:32 PM
#1
Junior Member
Thread Starter
iTrader: (3)
Join Date: Aug 2007
Location: Fleming Island, FLorida
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Car: 72 Chevelle
Engine: 468
Transmission: Muncie
Axle/Gears: 355
TPI performance Parts for ZZ4 Build
I am parting with a collection of TPI parts for a ZZ4 project that never materialized.
Edelbrock High-Flo TPI Intake System EDL 3890 Kit
Complete minus Throttle Body. 82-95 Firebird Z28 Camaro Trans Am TA Corvette Iroc GTA
Includes: A good set of 350 tpi injectors, cold start injector(9th injector) , thermostat housing and Plenum trim shown in the picture.
This system will fit both early and late model center bolt stock and aftermarket heads through 1995.
The cast number on the base in the picture appears to be 3860.
Eldelbrock high flo base and runners Complete intake system minus TB $45-
<a href="http://s297.photobucket.com/user/robvano/media/20140708_204707_zps7e5eab45.jpg.html" target="_blank"><img src="http://i297.photobucket.com/albums/mm201/robvano/20140708_204707_zps7e5eab45.jpg" border="0" alt=" photo 20140708_204707_zps7e5eab45.jpg"/></a>
<a href="http://s297.photobucket.com/user/robvano/media/20140708_204658_zpsf117406a.jpg.html" target="_blank"><img src="http://i297.photobucket.com/albums/mm201/robvano/20140708_204658_zpsf117406a.jpg" border="0" alt=" photo 20140708_204658_zpsf117406a.jpg"/></a>
Edelbrock Performer Aluminum Heads, 60cc, Model 6085 $650
Combustion chamber volume: 60 cc, Head torque: 65ftlbs, stud torque: 45ftlbs, Deck thickness: 9/16", Valve Seats: Hardened, interlocking,compatible with unleaded fuels , Valve Size: Intake‐2.02", Exhaust‐1.60", Valve Spring
Diameter: 1.45", Valve Spring Installed Height: 1.800", Valve Spring Seat Pressure: 120lbs., Max. Valve Lift: .600"
Alum Roller rockers 1.5? SOLD!
Edelbrock TPI manual Trans Headers $200 SOLD!
ZZ4 camshaft $70 - SOLD
These prices do not include shipping. All parts have not been packaged and I will need time to package in-order to quote shipping.
These parts have been stored in doors for several years. I will be posting more parts once locate them.
I'm located in Jacksonville Florida 32003 area
call or text 904 446 773 three
Edelbrock High-Flo TPI Intake System EDL 3890 Kit
Complete minus Throttle Body. 82-95 Firebird Z28 Camaro Trans Am TA Corvette Iroc GTA
Includes: A good set of 350 tpi injectors, cold start injector(9th injector) , thermostat housing and Plenum trim shown in the picture.
This system will fit both early and late model center bolt stock and aftermarket heads through 1995.
The cast number on the base in the picture appears to be 3860.
Eldelbrock high flo base and runners Complete intake system minus TB $45-
<a href="http://s297.photobucket.com/user/robvano/media/20140708_204707_zps7e5eab45.jpg.html" target="_blank"><img src="http://i297.photobucket.com/albums/mm201/robvano/20140708_204707_zps7e5eab45.jpg" border="0" alt=" photo 20140708_204707_zps7e5eab45.jpg"/></a>
<a href="http://s297.photobucket.com/user/robvano/media/20140708_204658_zpsf117406a.jpg.html" target="_blank"><img src="http://i297.photobucket.com/albums/mm201/robvano/20140708_204658_zpsf117406a.jpg" border="0" alt=" photo 20140708_204658_zpsf117406a.jpg"/></a>
Edelbrock Performer Aluminum Heads, 60cc, Model 6085 $650
Combustion chamber volume: 60 cc, Head torque: 65ftlbs, stud torque: 45ftlbs, Deck thickness: 9/16", Valve Seats: Hardened, interlocking,compatible with unleaded fuels , Valve Size: Intake‐2.02", Exhaust‐1.60", Valve Spring
Diameter: 1.45", Valve Spring Installed Height: 1.800", Valve Spring Seat Pressure: 120lbs., Max. Valve Lift: .600"
Alum Roller rockers 1.5? SOLD!
Edelbrock TPI manual Trans Headers $200 SOLD!
ZZ4 camshaft $70 - SOLD
These prices do not include shipping. All parts have not been packaged and I will need time to package in-order to quote shipping.
These parts have been stored in doors for several years. I will be posting more parts once locate them.
I'm located in Jacksonville Florida 32003 area
call or text 904 446 773 three
Last edited by robvano; 08-04-2014 at 01:36 PM.
07-09-2014, 08:04 PM
#2
Senior Member
Join Date: Jun 2011
Location: Melbourne, Australia
Posts: 839
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 IROC Camaro (RHD)
Engine: 350 ci L98 SBC
Transmission: T700
Axle/Gears: 9 bolt BW, Disk, Posi-traction
Re: TPI performance Parts for ZZ4 Build
Do you have a Y pipe for the headers?
Would you ship to CA?
Would you ship to CA?
07-10-2014, 02:41 AM
#3
Junior Member
Thread Starter
iTrader: (3)
Join Date: Aug 2007
Location: Fleming Island, FLorida
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Car: 72 Chevelle
Engine: 468
Transmission: Muncie
Axle/Gears: 355
Re: TPI performance Parts for ZZ4 Build
Peter,
Sorry No Y Pipe. I'll try to package them later today and get back to you with a quote. I work 2 jobs, so I may need a little time.
Rob V.
Sorry No Y Pipe. I'll try to package them later today and get back to you with a quote. I work 2 jobs, so I may need a little time.
Rob V.
07-10-2014, 09:49 PM
#5
Junior Member
Thread Starter
iTrader: (3)
Join Date: Aug 2007
Location: Fleming Island, FLorida
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Car: 72 Chevelle
Engine: 468
Transmission: Muncie
Axle/Gears: 355
Re: TPI performance Parts for ZZ4 Build
PAFORM,
The Cam is used showing no wear.
Rob V.
The Cam is used showing no wear.
Rob V.
07-12-2014, 09:36 PM
#6
Junior Member
Thread Starter
iTrader: (3)
Join Date: Aug 2007
Location: Fleming Island, FLorida
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Car: 72 Chevelle
Engine: 468
Transmission: Muncie
Axle/Gears: 355
Re: TPI performance Parts for ZZ4 Build
ZZ4 CAM - SOLD!
Last edited by robvano; 07-16-2014 at 08:47 AM.
07-14-2014, 04:50 PM
#7
Junior Member
Thread Starter
iTrader: (3)
Join Date: Aug 2007
Location: Fleming Island, FLorida
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Car: 72 Chevelle
Engine: 468
Transmission: Muncie
Axle/Gears: 355
Re: TPI performance Parts for ZZ4 Build
Headers are Packed in a 19x19x12 box (22lbs)
Standard USPS Shipping to CA is approx $35.
SOLD!
Standard USPS Shipping to CA is approx $35.
SOLD!
Last edited by robvano; 08-04-2014 at 01:33 PM.
Trending Topics
09-25-2014, 01:29 PM
#8
Junior Member
Join Date: Jan 2013
Location: Surprise,AZ
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 z28 Camaro
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: Posi with 323
Re: TPI performance Parts for ZZ4 Build
Hi do you still have the runners and base?
09-25-2014, 01:31 PM
#9
Junior Member
Join Date: Jan 2013
Location: Surprise,AZ
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 z28 Camaro
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: Posi with 323
Re: TPI performance Parts for ZZ4 Build
Do you still have Edelbrock base and runners
Thread
Thread Starter
Forum
Replies
Last Post
86IROC112
Engine/Drivetrain/Suspension Parts for Sale
4
08-17-2015 02:00 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM