Comp Retrofit Roller Cam Kit
03-17-2014, 07:04 PM
#1
Supreme Member
Thread Starter
iTrader: (35)
Join Date: Feb 2003
Location: Albuquerque, NM
Posts: 1,229
Likes: 0
Received 3 Likes
on
2 Posts
Car: 1966 El Camino Custom
Engine: 350
Transmission: 200R4
Axle/Gears: 3:73 12 bolt with Brute Strength
Comp Retrofit Roller Cam Kit
I've got a retrofit roller cam set up for a non-roller SBC block. The lifters are brand new in the box. The part number is 853-16. These are $475 retail.
The Comp roller cam is used but in good condition. It is a great cam for a carbed motor. Part number is 12-420-8 and the grind number is CS 270H-R10. Specs are .500 lift on both the intake and exhaust with a 215 duration at .050. Lobe separation is 110. This is a retrofit roller cam that must be used with a cam button. I am including two new ones...a solid and a roller.
The timing set is a Comp as well. It's adjustable and I'm throwing in a new thrust bearing to protect the block. I didn't use it but you might want to. The timing set has about 3000 miles and is in very good condition.
I'll sell the all the parts listed above for less than the cost of the lifters. $450 plus shipping. I'll eat any PayPal fees.
The Comp roller cam is used but in good condition. It is a great cam for a carbed motor. Part number is 12-420-8 and the grind number is CS 270H-R10. Specs are .500 lift on both the intake and exhaust with a 215 duration at .050. Lobe separation is 110. This is a retrofit roller cam that must be used with a cam button. I am including two new ones...a solid and a roller.
The timing set is a Comp as well. It's adjustable and I'm throwing in a new thrust bearing to protect the block. I didn't use it but you might want to. The timing set has about 3000 miles and is in very good condition.
I'll sell the all the parts listed above for less than the cost of the lifters. $450 plus shipping. I'll eat any PayPal fees.
03-21-2014, 05:20 PM
#2
03-21-2014, 11:00 PM
#4
Supreme Member
Thread Starter
iTrader: (35)
Join Date: Feb 2003
Location: Albuquerque, NM
Posts: 1,229
Likes: 0
Received 3 Likes
on
2 Posts
Car: 1966 El Camino Custom
Engine: 350
Transmission: 200R4
Axle/Gears: 3:73 12 bolt with Brute Strength
Re: Comp Retrofit Roller Cam Kit
Currently have a sale pending. If it falls through, I'll quote a price on just the lifters. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
junkcltr
Tech / General Engine
6
08-02-2019 11:12 PM
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
gixxer92
Engine/Drivetrain/Suspension Parts for Sale
5
09-01-2015 04:32 PM
