[NM] Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
10-27-2013, 05:10 PM
#1
Member
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z28 Camaro
Engine: none
Transmission: T-56 W/ Spec 1 Clutch
Axle/Gears: 9 Bolt BW 3.27 Gears
Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
I have a pair of 093 heads for sale. they have around 7k miles on them since i had them machined. They have comp springs good for .500 lift.
TPI induction system that came of my 88 IROC.
Rotating assembly that has 7k miles on it. Piston are .30 over and will give around a 10.2 CR W/ 64 cc heads
I dont know what brand these headers are maybe flowtech. 1.5 ports.
I have a complete serpentine setup without the air pump.
I have a B&M shifter complete and a B&M tork master Torque converter 2000 stall just installed in my car but i never used it because i got a good deal on a t56 swap.
A stock shift select cable and a brake pedal.
I also have for Moog front coil springs used for 100 miles
2 700r4 cross members
2 700r4 torque arm bushing brackets
2 torque arms
Drive-shaft
Prices are negotiable i just need this stuff gone!
Pair of 193 Heads: 140 shipped SOLD
TPI induction system (85-88): $180 shipped SOLD
Rotating Assembly: $50 + Shipping
complete serpentine setup: 200 Shipped SOLD
Water Pump: $20 + Shipping SOLD
Alternator: $30 + Shipping SOLD
AC compressor: $35 + Shipping SOLD
Power Steering pump: $60+ Shipping SOLD
Torque Converter: $130 + Shipping SOLD
B&M shifter W/ select cable: $100 + Shipping
Shifter select cable: $15 + Shipping
Brake Pedal W/bracket: $15 + Shipping
Crank Pulley: $ 20 + Shipping SOLD
Moog coilsprings: $30 + shipping
Transmission Crossmember: $25 + shipping
Torque arm bushing bracket: $15 + shipping
Torque Arm: $40 + shipping
Driveshaft: $40 + shipping
TPI induction system that came of my 88 IROC.
Rotating assembly that has 7k miles on it. Piston are .30 over and will give around a 10.2 CR W/ 64 cc heads
I dont know what brand these headers are maybe flowtech. 1.5 ports.
I have a complete serpentine setup without the air pump.
I have a B&M shifter complete and a B&M tork master Torque converter 2000 stall just installed in my car but i never used it because i got a good deal on a t56 swap.
A stock shift select cable and a brake pedal.
I also have for Moog front coil springs used for 100 miles
2 700r4 cross members
2 700r4 torque arm bushing brackets
2 torque arms
Drive-shaft
Prices are negotiable i just need this stuff gone!
Pair of 193 Heads: 140 shipped SOLD
TPI induction system (85-88): $180 shipped SOLD
Rotating Assembly: $50 + Shipping
complete serpentine setup: 200 Shipped SOLD
Water Pump: $20 + Shipping SOLD
Alternator: $30 + Shipping SOLD
AC compressor: $35 + Shipping SOLD
Power Steering pump: $60+ Shipping SOLD
Torque Converter: $130 + Shipping SOLD
B&M shifter W/ select cable: $100 + Shipping
Shifter select cable: $15 + Shipping
Brake Pedal W/bracket: $15 + Shipping
Crank Pulley: $ 20 + Shipping SOLD
Moog coilsprings: $30 + shipping
Transmission Crossmember: $25 + shipping
Torque arm bushing bracket: $15 + shipping
Torque Arm: $40 + shipping
Driveshaft: $40 + shipping
Last edited by KMdoza7; 02-12-2014 at 08:10 AM.
10-27-2013, 05:20 PM
#2
Member
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z28 Camaro
Engine: none
Transmission: T-56 W/ Spec 1 Clutch
Axle/Gears: 9 Bolt BW 3.27 Gears
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
Pictures
10-28-2013, 11:26 PM
#4
Senior Member
iTrader: (8)
Join Date: Aug 2011
Location: Texas
Posts: 661
Likes: 0
Received 7 Likes
on
7 Posts
Car: 91 Firebird/88 Firebird/91 Formula
Engine: V6 3.1/V8 5.0/V8 5.0
Transmission: 4L60/700R4/4L60
Axle/Gears: 3.23/2.73/2.73
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
Is that an aluminum driveshaft? LT1 type?
10-29-2013, 07:53 PM
#7
Senior Member
Join Date: Jun 2011
Location: Detroit, MI
Posts: 939
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z red t-top
Engine: Nothing much
Transmission: I wish t56
Axle/Gears: 9bolt 3.27 4sale
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
Specifications on pistons brand material etc
Trending Topics
10-31-2013, 01:56 PM
#9
Member
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z28 Camaro
Engine: none
Transmission: T-56 W/ Spec 1 Clutch
Axle/Gears: 9 Bolt BW 3.27 Gears
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
BUMP. tell me what you need and we can work something out
11-02-2013, 06:40 PM
#10
Senior Member
Join Date: Jun 2011
Location: Detroit, MI
Posts: 939
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z red t-top
Engine: Nothing much
Transmission: I wish t56
Axle/Gears: 9bolt 3.27 4sale
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
Sorry I need +12 pistons
11-06-2013, 03:09 AM
#11
Member
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z28 Camaro
Engine: none
Transmission: T-56 W/ Spec 1 Clutch
Axle/Gears: 9 Bolt BW 3.27 Gears
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
BUMP
11-10-2013, 04:42 PM
#14
Supreme Member
iTrader: (6)
Join Date: Aug 2009
Location: Elwood, IN
Posts: 3,670
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1986 camaro Sports Coupe
Engine: L31 350
Transmission: 89 700R4
Axle/Gears: 3.42 gov lock
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
Better pictures and info on headers and stall
11-10-2013, 07:37 PM
#15
Member
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z28 Camaro
Engine: none
Transmission: T-56 W/ Spec 1 Clutch
Axle/Gears: 9 Bolt BW 3.27 Gears
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
Headers are flowtechs I think. they have 1.5" primaries ill include a y-pipe also. I cant take a picture of them anymore because I just re-installed them on my iroc. they are VERY easy to install
Stall: B&M tork master 2000 stall, 30 spline, lockup. ill add another picture of it tomorrow.
I only installed it on my car, I never ran it. Once I installed it I took it out the next day because I got a good deal on a t-56 swap
Stall: B&M tork master 2000 stall, 30 spline, lockup. ill add another picture of it tomorrow.
I only installed it on my car, I never ran it. Once I installed it I took it out the next day because I got a good deal on a t-56 swap
11-10-2013, 07:57 PM
#16
Supreme Member
iTrader: (6)
Join Date: Aug 2009
Location: Elwood, IN
Posts: 3,670
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1986 camaro Sports Coupe
Engine: L31 350
Transmission: 89 700R4
Axle/Gears: 3.42 gov lock
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
Headers are flowtechs I think. they have 1.5" primaries ill include a y-pipe also. I cant take a picture of them anymore because I just re-installed them on my iroc. they are VERY easy to install
Stall: B&M tork master 2000 stall, 30 spline, lockup. ill add another picture of it tomorrow.
I only installed it on my car, I never ran it. Once I installed it I took it out the next day because I got a good deal on a t-56 swap
Stall: B&M tork master 2000 stall, 30 spline, lockup. ill add another picture of it tomorrow.
I only installed it on my car, I never ran it. Once I installed it I took it out the next day because I got a good deal on a t-56 swap
11-10-2013, 10:14 PM
#17
Member
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z28 Camaro
Engine: none
Transmission: T-56 W/ Spec 1 Clutch
Axle/Gears: 9 Bolt BW 3.27 Gears
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
I don't think I want to sell the headers anymore, I just installed them, and the dyno don headers are pretty expensive. but for the convertor ill take 175 shipped. I think shipping will be 50 so ill split the shipping cost and if its more it doesn't matter
11-10-2013, 10:46 PM
#18
Supreme Member
iTrader: (6)
Join Date: Aug 2009
Location: Elwood, IN
Posts: 3,670
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1986 camaro Sports Coupe
Engine: L31 350
Transmission: 89 700R4
Axle/Gears: 3.42 gov lock
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
Was mainly interested in the headers. Will think about the converter.
11-14-2013, 11:26 PM
#20
Member
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z28 Camaro
Engine: none
Transmission: T-56 W/ Spec 1 Clutch
Axle/Gears: 9 Bolt BW 3.27 Gears
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
Yes sir I am willing
11-15-2013, 11:44 AM
#22
Member
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z28 Camaro
Engine: none
Transmission: T-56 W/ Spec 1 Clutch
Axle/Gears: 9 Bolt BW 3.27 Gears
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
$160 shipped
12-31-2013, 03:56 PM
#23
Member
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z28 Camaro
Engine: none
Transmission: T-56 W/ Spec 1 Clutch
Axle/Gears: 9 Bolt BW 3.27 Gears
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
Bump
12-31-2013, 09:13 PM
#24
Member
Join Date: Nov 2011
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 trans am GTA
Engine: 355
Transmission: T56
Axle/Gears: 3.27
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
are these the stock heads for an l98 just rebuilt? are they still available? centerbolt style?
shippped to 95901
shippped to 95901
12-31-2013, 11:16 PM
#25
Member
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z28 Camaro
Engine: none
Transmission: T-56 W/ Spec 1 Clutch
Axle/Gears: 9 Bolt BW 3.27 Gears
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
01-02-2014, 12:44 PM
#26
Member
Join Date: Nov 2011
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 trans am GTA
Engine: 355
Transmission: T56
Axle/Gears: 3.27
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
Do you have any pictures? Can you email them to outlawfiero17@gmail.com
do you have PayPal?
do you have PayPal?
01-02-2014, 06:06 PM
#27
Member
Join Date: Nov 2011
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 trans am GTA
Engine: 355
Transmission: T56
Axle/Gears: 3.27
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
What size are the chambers? I can't find any info on these heads vs. My stock heads
01-03-2014, 01:06 AM
#28
Member
Join Date: Mar 2012
Location: Murphy, NC
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Car: 83 Z28/L69
Engine: L69 305H.O.
Transmission: 6spd T56
Axle/Gears: 4.10 LS 4th Gen
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
01-04-2014, 10:06 PM
#29
Member
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z28 Camaro
Engine: none
Transmission: T-56 W/ Spec 1 Clutch
Axle/Gears: 9 Bolt BW 3.27 Gears
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
MY bad they are 193's not 093!!! sorry
01-04-2014, 10:08 PM
#30
Member
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z28 Camaro
Engine: none
Transmission: T-56 W/ Spec 1 Clutch
Axle/Gears: 9 Bolt BW 3.27 Gears
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
https://www.thirdgen.org/forums/tpi/...n-350-tpi.html
heres alittle comparison between the heads. 193 vs 083
heres alittle comparison between the heads. 193 vs 083
01-04-2014, 10:14 PM
#31
Member
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z28 Camaro
Engine: none
Transmission: T-56 W/ Spec 1 Clutch
Axle/Gears: 9 Bolt BW 3.27 Gears
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
BUMP. new prices
01-05-2014, 12:13 AM
#32
Member
Join Date: May 2009
Location: Paris, tn
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Z28, 1991 RS
Engine: 350 Carbed, 305 TBI
Transmission: 700r4, t5
Axle/Gears: 3.23s posi Limited Slip, 3.08 posi
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
would you sell that y pipe
01-05-2014, 01:05 AM
#33
Member
Join Date: Nov 2011
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 trans am GTA
Engine: 355
Transmission: T56
Axle/Gears: 3.27
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
so after reading the article. seems like these heads are fairly close to stock l98 heads. same size rocker studs? 3/8" would like to re use my rockers. you said $115 shipped thats a deal. i figure my exhaust flows better than stock but i am limited to stock intake. so up top wont make too much of a difference. figure a slight port and polish and call it a day. who's to say i cant keep my 083's and make them even better for a latter project?
01-05-2014, 01:21 AM
#34
Member
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z28 Camaro
Engine: none
Transmission: T-56 W/ Spec 1 Clutch
Axle/Gears: 9 Bolt BW 3.27 Gears
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
so after reading the article. seems like these heads are fairly close to stock l98 heads. same size rocker studs? 3/8" would like to re use my rockers. you said $115 shipped thats a deal. i figure my exhaust flows better than stock but i am limited to stock intake. so up top wont make too much of a difference. figure a slight port and polish and call it a day. who's to say i cant keep my 083's and make them even better for a latter project?
but they die alittle over 5k:/. they also provide alot of low end torque but yea $115 shipped. PM me
01-05-2014, 01:24 AM
#35
Member
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z28 Camaro
Engine: none
Transmission: T-56 W/ Spec 1 Clutch
Axle/Gears: 9 Bolt BW 3.27 Gears
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
yes ill sell the y pipe. PM me
01-09-2014, 12:32 AM
#36
Junior Member
Join Date: Jan 2013
Location: atl
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 camaro rs
Engine: lo5
Transmission: 700r4
Axle/Gears: 373 with detroit limited slip
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
Still have the heads
01-14-2014, 08:07 PM
#38
Member
Join Date: Mar 2010
Location: Pennsylvania
Posts: 317
Likes: 0
Received 2 Likes
on
2 Posts
Car: 86 Trans am
Engine: LG4
Transmission: T-5
Axle/Gears: 3.27 9 bolt posi
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
What do you mean by tpi induction system, what all is included
01-14-2014, 09:54 PM
#39
Member
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z28 Camaro
Engine: none
Transmission: T-56 W/ Spec 1 Clutch
Axle/Gears: 9 Bolt BW 3.27 Gears
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
01-14-2014, 09:59 PM
#41
Junior Member
Join Date: Aug 2012
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Car: '87 Bitchin' camaro Z/28
Engine: 305 lg-4
Transmission: 700-r4, hopefully soon to be t-5
Axle/Gears: 3.23
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
how many miles on struts? give or take... thanks
01-15-2014, 01:44 PM
#42
Member
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z28 Camaro
Engine: none
Transmission: T-56 W/ Spec 1 Clutch
Axle/Gears: 9 Bolt BW 3.27 Gears
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
01-19-2014, 12:08 AM
#44
Member
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z28 Camaro
Engine: none
Transmission: T-56 W/ Spec 1 Clutch
Axle/Gears: 9 Bolt BW 3.27 Gears
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
180 shipped sound good?
01-20-2014, 06:55 PM
#46
Member
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z28 Camaro
Engine: none
Transmission: T-56 W/ Spec 1 Clutch
Axle/Gears: 9 Bolt BW 3.27 Gears
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
Cylinder Heads sold
01-22-2014, 07:34 PM
#47
Member
iTrader: (8)
Join Date: Mar 2007
Location: Shreveport Louisianna Barksdale AFB
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
how much for the front struts?
01-23-2014, 10:48 AM
#49
Member
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z28 Camaro
Engine: none
Transmission: T-56 W/ Spec 1 Clutch
Axle/Gears: 9 Bolt BW 3.27 Gears
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
I still have:
B&M Tork Master Converter: 2000 stall only installed never used for 170 shipped
TPI induction: 180 sales pending
Complete serp setup: 200 shipped
B&M Megashifter w/ select cable: 120 shipped
B&M Tork Master Converter: 2000 stall only installed never used for 170 shipped
TPI induction: 180 sales pending
Complete serp setup: 200 shipped
B&M Megashifter w/ select cable: 120 shipped
01-24-2014, 12:39 PM
#50
Member
Thread Starter
iTrader: (1)
Join Date: Sep 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z28 Camaro
Engine: none
Transmission: T-56 W/ Spec 1 Clutch
Axle/Gears: 9 Bolt BW 3.27 Gears
Re: Cylinder Heads, rotating assembly, and much more!! (CHEAP) need this stuff gone!
TPI system is sold!